bioRxiv Science⌕ Search
Home/Archive/bioRxiv

bioRxiv · 10.64898/2026.10.07.757391

Comparison of Total X-Ray Energy Absorbed by Fibroglandular Tissue and its Mass Derived from Full Field Digital Mammography and Digital Breast Tomosynthesis

Heine, J.·Fowler, E.·Weinfurtner, R. J.·Egan, K. M.
View original source ↗Export metadata ↓

Abstract

This study investigated whether total x-ray energy absorbed by fibroglandular tissue and fibroglandular tissue mass derived from raw and clinical full field digital mammography (FFDM) images corresponded with the respective quantities derived from digital breast tomosynthesis (DBT). A total of 840 paired FFDM and DBT observations were analyzed separately for the craniocaudal (CC) and mediolateral oblique (MLO) orientations. Total absorbed x-ray energy and fibroglandular tissue mass were calculated using an automated breast density detection method in conjunction with the recorded average glandular dose. Relationships between FFDM and DBT quantities were evaluated in the log-log domain using linear and quadratic models, with model performance assessed by R2, adjusted R2, mean squared error (MSE), chi-square goodness-of-fit tests, and residual analysis. Strong associations were observed between FFDM and respective DBT quantities. For raw FFDM, linear energy models produced R2 values of 0.734 and 0.901 for the CC and MLO views, respectively, while the corresponding mass models produced R2 values of 0.634 and 0.870. Inclusion of a quadratic term improved model performance modestly. For clinical FFDM, linear energy models produced R2 values of 0.854 and 0.919, while the corresponding mass models produced R2 values of 0.721 and 0.812. The first-order coefficients for the clinical-image energy models were approximately unity (0.99-1.05), and inclusion of the quadratic term produced negligible changes in model performance and residual distributions. The goodness-of-fit tests did not reject adequate fit for any model. Clinical FFDM images can therefore provide estimates of total absorbed x-ray energy and fibroglandular tissue mass that are strongly associated with corresponding quantities derived from DBT. The approximately unit first-order coefficients and minimal benefit from quadratic modeling support a simple linear log-log calibration for clinical FFDM. This approach may facilitate combining FFDM and DBT based data in larger retrospective and longitudinal studies of cumulative mammographic x-ray exposure. These findings demonstrate proof-of-concept internal consistency but do not establish absolute dosimetric accuracy.

Explore related subjects

bioinformaticsPreprint

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Heine, J., Fowler, E., Weinfurtner, R. J., Egan, K. M.. 2026-10-14. Comparison of Total X-Ray Energy Absorbed by Fibroglandular Tissue and its Mass Derived from Full Field Digital Mammography and Digital Breast Tomosynthesis. https://doi.org/10.64898/2026.10.07.757391

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related preprints

bioRxiv2026

Phase-Based Frequency Tracking and Analysis of Vocalisations in the Genus Saxicola

Acoustic analysis provides valuable tools for studying bird vocalisations, but quantitative characterisation of call structure remains challenging when frequency and amplitude vary jointly over time. We present a phase-based frequency tracking method that represents amplitude as a function of instantaneous frequency and use it to characterise alarm calls in the genus Saxicola. The method enables the extraction of acoustic features describing the frequency trajectory and temporal structure of individual calls. We apply the method to a dataset of 801 calls from 49 recordings representing 15 species, and use principal component analysis (PCA) and robust PCA to investigate patterns of acoustic variation across species, recordings and geographic regions. The results demonstrate the feasibility of the approach and reveal structured patterns of acoustic similarity and variation among the calls analysed. Robust PCA concentrates the variance of the low-rank representation into fewer principal components than conventional PCA applied to the original feature matrix, providing a complementary representation of the dominant acoustic structure. The observed patterns illustrate the potential of quantitative acoustic characterisation for comparative studies of vocal variation. However, uneven species representation and uncertainty in individual identity and taxonomic labels limit the biological conclusions that can be drawn from the present dataset. The method provides a foundation for further acoustic research, in which broader sampling and integration with independent genetic and morphological evidence could help investigate variation within and among species.

bioinformatics↗
bioRxiv2026

A Sparse Modal Representation for Dolphin Echolocation Transients

Characterising echolocation provides a non-invasive means of monitoring cetacean populations, health, and behaviour, offering critical data to inform conservation policy and mitigate the impacts of anthropogenic ocean noise. Echolocation clicks are short broadband transients whose internal oscillatory structure is difficult to compare in a sequence using conventional time- or frequency-domain representations. We introduce a Sparse Modal Representation (SMR) in which each click is described as a sparse superposition of delayed damped resonant modes. The representation separates resonant behaviour from temporal localisation, allowing both narrowband and broadband click components to emerge from the same set of resonant building blocks. The methodology combines Burg autoregressive pole estimation, sparse approximation in an over-complete dictionary, and nonlinear parameter refinement to obtain compact and interpretable modal descriptions of individual transients. The method is evaluated using recordings of free-ranging common dolphins (Delphinus delphis) from the DOLPHINFREE project in the Northern Bay of Biscay. The results demonstrate accurate reconstruction using a limited set of parameters that are repeatable across successive clicks and robust under realistic recording conditions. These conditions include wave, vessel, and sonar interference. Repeatability and robustness are essential for using this parameter set to detect changes in animal behaviour.

bioinformatics↗
bioRxiv2026

muDM: A Queryable Multi-Resolution Data Model for Vector Geometry in Spatial Bioimaging

Spatial bioimaging combines raster imagery with vector geometries that encode molecular measurements, connectivity, and anatomical labels. A major challenge is to connect and jointly query these resources at scale, because the vector structures that locate them cannot be searched across resolutions. muDM is a spatial data model for associating vector geometry with its annotated records. Under a single schema, it arranges 2D and 3D geometries, together with their identities and measurements, as a precomputed multi-resolution pyramid, a columnar store that can be queried in place from object storage and equivalent render-ready tiles from the same index. Deployed in a public catalog containing more than 100 datasets, this single model supports connectome meshes, multiplexed tissue imaging, and spatial transcriptomics. For neuron meshes, classifiers which use geometry together with linked synapse counts exceed the performance of geometry-only models, while coarser levels preserved most balanced accuracy and using up to two orders of magnitude less stored geometry.

bioinformatics↗