Biology subjects

Zucchelli, A.

Publications and source records attributed to Zucchelli, A..

3 recordsLinked to original sources

bioRxiv2024

RELATIONSHIP BETWEEN ACTUAL STRESS AND IN SITU MORPHOLOGICAL CHANGES IN THE MECHANICAL BEHAVIOR OF BIOMIMETIC POROUS HIERARCHICAL SCAFFOLDS

This study investigates the evolution with strain of the material volume fraction (i.e., porosity) and geometry in porous scaffolds to obtain a more accurate description of their stress-strain behavior. Single bundles and hierarchical structures (8 bundles enveloped by a membrane) were produced by electrospinning as tendon/ligament scaffolds. They underwent a micro-tomography in situ tensile test. Apparent and net stress were obtained using the initial sample cross-section and material volume fraction to normalize axial force. Micro-tomography revealed sample morphology change with strain to calculate the actual stress-strain. Moreover, nanofibers arrangement was revealed by scanning electron microscopy on both bundles and membranes. The description of the mechanical response significantly changed using evolving morphometry (actual stress-strain) instead of initial static one (apparent stress-strain), for both single bundle and hierarchical structure. The actual elastic modulus of the single bundles (583{+/-}97 MPa) was statistically higher than that of the hierarchical structures (163{+/-}107 MPa). This is related to the membrane, membrane-bundle and inter-bundle interactions. In the hierarchical structure, portions of the material resisting traction are constituted by nanofibers not aligned with the load. The different definitions for the stress-strain behavior allow different accuracy levels depending on the experimental complexity. The evolution of morphology with deformation can significantly affect the description of the mechanical response of porous scaffolds. This has a double impact in practical applications: at the body scale, it allows a better comparison between the scaffold behavior and the target tissue; at the cellular scale, it predicts the actual substrate stiffness that cells will face. Graphical Abstract O_FIG O_LINKSMALLFIG WIDTH=200 HEIGHT=104 SRC="FIGDIR/small/630537v1_ufig1.gif" ALT="Figure 1"> View larger version (24K): org.highwire.dtl.DTLVardef@5d5337org.highwire.dtl.DTLVardef@1027047org.highwire.dtl.DTLVardef@11966a9org.highwire.dtl.DTLVardef@a2e4e3_HPS_FORMAT_FIGEXP M_FIG C_FIG

bioengineering↗

bioRxiv2024

Understanding the structure and mechanics of the sheep calcaneal enthesis: a relevant animal model for tissue engineering applications

Tendon/enthesis injuries are a worldwide clinical problem. Along the enthesis, collagen fibrils show a progressive loss of anisotropy and an increase in mineralization reaching the bone. This causes gradients of mechanical properties. The design of scaffolds to regenerate these load-bearing tissues requires of being validated in vivo in relevant large animal models. The sheep tendon of triceps surae muscle is an optimal animal model for this scope with limited knowledge about its structure and mechanics. We decided to understand in-depth its structure and full-field mechanics. Collagen fibrils morphology was investigated via scanning electron microscopy revealing a marked change in orientation/dimensions passing from tendon to enthesis. Backscatter electron images and nanoindentation at the enthesis/bone marked small gradients of mineralization at the mineralized fibrocartilage reaching 27%wt and indentation modulus around 17-30 GPa. The trabecular bone instead had indentation modulus around 15-22 GPa. Mechanical tensile tests with digital image correlation confirmed the typical non-linear behavior of tendons (failure strain = 8.2{+/-}1.0%; failure force = 1369{+/-}187 N) with maximum principal strains reaching mean values of {varepsilon}p1[~]7%. The typical auxetic behavior of tendon was highlighted by the minimum principal strains ({varepsilon}p2[~]5%), progressively dampened at the enthesis. Histology revealed that this behavior was caused by a local thickening of the epitenon. Cyclic tests showed a force loss of 21{+/-}7 % at the last cycle. These findings will be fundamental for biofabrication and clinicians interested in designing the new generation of scaffolds for enthesis regeneration. Graphical Abstract O_FIG O_LINKSMALLFIG WIDTH=200 HEIGHT=120 SRC="FIGDIR/small/630234v1_ufig1.gif" ALT="Figure 1"> View larger version (48K): org.highwire.dtl.DTLVardef@143f0a8org.highwire.dtl.DTLVardef@16cb394org.highwire.dtl.DTLVardef@181be61org.highwire.dtl.DTLVardef@f9f2d9_HPS_FORMAT_FIGEXP M_FIG C_FIG Statement of SignificanceTendon and enthesis lesions are a clinical problem. To validate scaffolds for these applications large animal models are needed. Sheep tendon of triceps surae muscle is an optimal site for this scope. However, little is known about its extracellular matrix structure and mechanical properties. This work investigates the structure and mechanics of this tissue from different points of view. Scanning electron microscopy and histology studied its extracellular matrix morphology and composition. Backscattered electron images and nanoindentation assessed gradients of mineralization and stiffness at the enthesis. Mechanical tensile and cyclic tests coupled with digital image correlation elucidated its mechanics and superficial strain distribution. These findings will be fundamental for biofabrication and clinician experts to design innovative scaffolds to regenerate the enthesis.

bioengineering↗

bioRxiv2023

Full-field strain distribution in hierarchical electrospun nanofibrous Poly-L(lactic) acid and Collagen based scaffolds for tendon and ligament tissue regeneration: a multiscale study

Regeneration of injured tendons and ligaments (T/L) is a worldwide need. In this study electrospun hierarchical scaffolds made of a poly (L-lactic) acid and collagen blend were developed reproducing all the multiscale levels of aggregation of these tissues. Scanning electron microscopy, microCT and tensile mechanical tests were carried out, including a multiscale digital volume correlation analysis to measure the full-field strain distribution of electrospun structures. The principal tensile and compressive strains detected the pattern of strains caused by the nanofibers rearrangement, while the deviatoric strains revealed the related internal sliding of nanofibers and bundles. The results of this study confirmed the biomimicry of such electrospun hierarchical scaffolds, paving the way to further tissue engineering and clinical applications. Graphical Abstract O_FIG O_LINKSMALLFIG WIDTH=200 HEIGHT=92 SRC="FIGDIR/small/543145v1_ufig1.gif" ALT="Figure 1"> View larger version (30K): org.highwire.dtl.DTLVardef@1a67baorg.highwire.dtl.DTLVardef@190149aorg.highwire.dtl.DTLVardef@38968borg.highwire.dtl.DTLVardef@123bb49_HPS_FORMAT_FIGEXP M_FIG C_FIG

bioengineering↗