Biology subjects

Schurch, A. C.

Publications and source records attributed to Schurch, A. C..

9 recordsLinked to original sources

bioRxiv2026

Post-transfer instability, not initial transfer, limits dissemination of IncI1-blaCTX-M-1 plasmids between chicken and human Escherichia coli.

Plasmids are key vectors in the dissemination of antibiotic resistance genes. Within Escherichia coli, IncI1 plasmids carrying blaCTX-M-1 significantly contribute to extended-spectrum beta-lactamase (ESBL) resistance. To investigate their zoonotic dissemination potential, we compared the conjugative transfer rates, post-transfer stability, and short-term evolution of two IncI1-blaCTX-M-1 plasmids transferred from their original chicken E. coli host to a panel of chicken and human E. coli. In vitro conjugation assays revealed that transfer rates were not affected by recipient host origin or temperature and were primarily governed by recipient genotype. However, post-transfer plasmid loss rates were host-dependent, with four-fold higher loss rates in human than chicken-derived transconjugants. The total number of mutations accumulated post-acquisition was determined by the identity of the specific plasmid rather than the host origin, with each plasmid following a distinct evolutionary trajectory involving convergent parallel deletions. Specifically, one trajectory involved the loss of genes associated with plasmid stability, observed more frequently in human than in chicken strains, while the other involved the loss of part of the conjugation machinery. Our findings show that, although these plasmids transfer easily between bacteria from chicken to human hosts, they are less stable in their new host environment, which may restrict their overall spread. A comprehensive One Health risk assessment must consider these critical downstream dynamics of plasmid stability and host-specific evolution.

microbiology↗

bioRxiv2025

Impact of selective digestive decontamination on the pangenome composition of ESBL-E. coli

In Dutch ICUs patients receive selective digestive decontamination (SDD) as a prophylactic antimicrobial treatment to prevent colonisation with potentially pathogenic microorganisms and subsequent infections, with a beneficial effect on 28-day mortality. In the R-GNOSIS ICU study, conducted outside of The Netherlands, SDD consisted of a mix of an oropharyngeal paste and a gastric suspension containing colistin, tobramycin and nystatin. These topical antimicrobial agents aim to target aerobic Gram-negative bacteria, S. aureus and yeast. SDD improves patient outcome, but its effects on the resistome and pangenome of potentially pathongenic microorganisms have not been extensively studied. In this work, we compared 129 genomes of E. coli isolates from patients that received SDD and patients that did not receive SDD, but standard care only (baseline patients) in five ICUs located across three European countries (R-GNOSIS ICU study). We found that the overall pangenome compositions of E. coli recovered from both patient groups were highly similar. Variations in the accessory genome were strongly associated with the phylogeny of isolates but not with the use of SDD. Similarly, the plasmidome variations were not explained by treatment, but rather by the interaction between ICU location and phylogroup. One antibiotic resistance gene, which confers resistance to tobramycin, was found to be more prevalent in SDD patients. This gene was flanked by IS26 elements and significantly co-occurred with blaCTX-M-15 in various plasmid backbones and chromosomal contexts. Notably, no mcr genes coding for colistin resistance were detected.

bioinformatics↗

bioRxiv2024

gplasCC: classification and reconstruction of plasmids from short-read sequencing data for any bacterial species

Plasmids play a pivotal role in the spread of antibiotic resistance genes. Accurately reconstructing plasmids often requires long-read sequencing, but bacterial genomic data in publicly accessible repositories has historically been derived from short-read sequencing technology. We recently presented an approach for reconstructing Escherichia coli antimicrobial resistance plasmids using Illumina short reads. This method consisted of combining a robust binary classification tool named plasmidEC with gplas2, which is a tool that makes use of features of the assembly graph to bin predicted plasmid contigs into individual plasmids. Here, we developed gplasCC, a plasmidEC-simplification, capable of classifying plasmid contigs using Centrifuge databases. We have developed seven plasmidCC databases in addition to the database for E. coli: six species-specific models (Acinetobacter baumannii, Enterococcus faecium, Enterococcus faecalis, Klebsiella pneumoniae, Staphylococcus aureus and Salmonella enterica) and one species-independent model for less frequently studied bacterial species. We combined these models with gplas2 (now, gplasCC) to reconstruct plasmids from more than 100 bacterial species. This approach allows comprehensive analysis of the wealth of bacterial short-read sequencing data available in public repositories and advance our understanding of microbial plasmids.

bioinformatics↗

bioRxiv2023

PlasmidEC and gplas2: An optimised short-read approach to predict and reconstruct antibiotic resistance plasmids in Escherichia coli

Accurate reconstruction of Escherichia coli antibiotic resistance gene (ARG) plasmids from Illumina sequencing data has proven to be a challenge with current bioinformatic tools. In this work, we present an improved method to reconstruct E. coli plasmids using short reads. We developed plasmidEC, an ensemble classifier that identifies plasmid-derived contigs by combining the output of three different binary classification tools. We showed that plasmidEC is especially suited to classify contigs derived from ARG plasmids with a high recall of 0.941. Additionally, we optimised gplas, a graph-based tool that bins plasmid-predicted contigs into distinct plasmid predictions. Gplas2 is more effective at recovering plasmids with large sequencing coverage variations and can be combined with the output of any binary classifier. The combination of plasmidEC with gplas2 showed a high completeness (median=0.818) and F1-score (median=0.812) when reconstructing ARG plasmids and exceeded the binning capacity of the reference-based method MOB-suite. In the absence of long read data, our method offers an excellent alternative to reconstruct ARG plasmids in E. coli. Data SummaryNo new sequencing data have been generated in this study. All genomes used in this research are publicly available at the GenBank and Sequence Read Archive of the National Center for Biotechnology Information. Accession numbers are specified in Supplementary Materials. Scripts to reproduce the results reported in this manuscript can be accessed at https://gitlab.com/jpaganini/ecoli-binary-classifier. The ensemble classifier, plasmidEC, is publicly available at https://gitlab.com/mmb-umcu/plasmidEC (release 1.3.1), and gplas2 (release 1.0.0) can be found at https://gitlab.com/mmb-umcu/gplas2. Impact StatementEscherichia coli has emerged as a highly pervasive multidrug resistant pathogen on a global scale. The dissemination of resistance is significantly influenced by plasmids, mobile genetic elements that facilitate the transfer of antimicrobial resistance genes within and between diverse bacterial species. Consequently, precise and high-throughput identification of plasmids is imperative for effective genomic surveillance of resistance. However, accurate plasmid reconstruction remains challenging with the use of affordable short-read sequencing data. In this work, we present a novel method to accurately predict and reconstruct E. coli plasmids based on Illumina data. Additionally, we demonstrate that our approach outperforms the reference-based method MOB-suite, especially when reconstructing plasmids carrying antimicrobial resistance genes.

bioinformatics↗

bioRxiv2022

Consistent typing of plasmids with the mge-cluster pipeline

Extrachromosomal elements of bacterial cells such as plasmids are notorious for their importance in evolution and adaptation to changing ecology. However, high-resolution population-wide analysis of plasmids has only become accessible recently with the advent of scalable long-read sequencing technology. Current typing methods for the classification of plasmids remain limited in their scope which motivated us to develop a computationally efficient approach to simultaneously recognize novel types and classify plasmids into previously identified groups. Our method can easily handle thousands of input sequences which are compressed using a unitig representation in a de Bruijn graph. We provide an intuitive visualization, classification and clustering scheme that users can explore interactively. This provides a framework that can be easily distributed and replicated, enabling a consistent labelling of plasmids across past, present, and future sequence collections. We illustrate the attractive features of our approach by the analysis of population-wide plasmid data from the opportunistic pathogen Escherichia coli and the distribution of the colistin resistance gene mcr-1.1 in the plasmid population.

bioinformatics↗

bioRxiv2021

Recovering Escherichia coli plasmids in the absence of long-read sequencing data

The incidence of infections caused by multidrug-resistant E. coli strains has risen in the past years. Antibiotic resistance in E. coli is often mediated by acquisition and maintenance of plasmids. The study of E. coli plasmid epidemiology and genomics often requires long-read sequencing information, but recently a number of tools that allow plasmid prediction from short-read data have been developed. Here, we reviewed 25 available plasmid prediction tools and categorized them into binary plasmid/chromosome classification tools and plasmid reconstruction tools. We benchmarked six tools that aim to reliably reconstruct distinct plasmids, with a special focus on plasmids carrying antibiotic resistance genes (ARGs) such as extended-spectrum beta-lactamase genes. They use either assembly graph information (plasmidSPAdes, gplas), reference databases (MOB-Suite, FishingForPlasmids) or both (HyAsP and SCAPP) to produce plasmid predictions. The benchmark data set consisted of 240 E. coli strains, harboring 631 plasmids, which were representative for the diversity of E. coli in public databases. Notably, these strains were not used for training any of the tools. We found that two thirds (n=425, 66.3.%) of all plasmids were correctly reconstructed by at least one of the six tools, with a range of 92 (14.58%) to 317 (50.23%) correctly predicted plasmids. However, the majority of plasmids that carried antibiotic resistance genes (n=85, 57.8%) could not be completely recovered as distinct plasmids by any of the tools. MOB-suite was the only tool that was able to correctly reconstruct the majority of plasmids (n=317, 50.23%), and performed best at reconstructing large plasmids (n=166, 46.37%) and ARG-plasmids (n=41, 27.9%), but predictions frequently contained chromosome contamination (40%). In contrast, plasmidSPAdes reconstructed the highest fraction of plasmids smaller than 18 kbp (n=168, 61.54%). Large ARG-plasmids, however, were recovered with small precision values (median=0.47, IQR=0.61), indicating that plasmidSPAdes frequently merged sequences derived from distinct replicons. Additionally, only 63% of all plasmid-borne ARGs were correctly predicted by plasmidSPAdes. The remaining four tools (FishingForPlasmids, HyAsP, SCAPP and gplas) were able to correctly reconstruct a combined total of 18 plasmids that were missed by MOB-suite and plasmidSPAdes. Available bioinformatic tools can provide valuable insight into E. coli plasmids, but also have important limitations. This work will serve as a guideline for selecting the most appropriate plasmid reconstruction tool for studies focusing on E. coli plasmids in the absence of long-read sequencing data.

bioinformatics↗

bioRxiv2020

Genomic rearrangements uncovered by genome-wide co-evolution analysis of a major nosocomial pathogen Enterococcus faecium

Enterococcus faecium is a gut commensal of the gastro-digestive tract, but also known as nosocomial pathogen among hospitalized patients. Population genetics based on whole-genome sequencing has revealed that E. faecium strains from hospitalized patients form a distinct clade, designated as clade A1 and that plasmids are major contributors to the emergence of nosocomial E. faecium. Here we further explored the adaptive evolution of E. faecium using a genome-wide co-evolution study (GWES) to identify co-evolving SNPs. We identified three genomic regions harboring large numbers of SNPs in tight linkage which are not proximal to each other based on the completely assembled chromosome of clade A1 reference hospital isolate AUS0004. Close examination of these regions revealed that they are located at the borders of four different types of large-scale genomic rearrangements, insertion sites of two different genomic islands and an IS30-like transposon. In non-clade A1 isolates, these regions are adjacent to each other and they lack the insertions of the genomic islands and IS30-like transposon. Additionally, among the clade A1 isolates there is one group of pet isolates lacking the genomic rearrangement and insertion of the genomic islands, suggesting a distinct evolutionary trajectory. In silico analysis of the biological functions of the genes encoded in three regions revealed a common link to a stress response. This suggests that these rearrangements may reflect adaptation to the stringent conditions in the hospital environment, such as antibiotics and detergents, to which bacteria are exposed. In conclusion, to our knowledge, this is the first study using GWES to identify genomic rearrangements, suggesting that there is considerable untapped potential to unravel hidden evolutionary signals from population genomic data. Impact statementEnterococcus faecium has emerged as an important nosocomial pathogen around the world. Population genetics revealed that clinical E. faecium strains form a distinct clade, designated as clade A1 and that plasmids are major contributors to the emergence of nosocomial E. faecium. Here, the adaptive evolution of E. faecium was further explored using an unsupervised machine learning method (SuperDCA) to identify genome-wide co-evolving SNPs. We identified three genomic regions harboring large numbers of SNPs in tight linkage which are separated by a large chromosomal distance in a clinical clade A1 reference isolate, but appeared adjacent to each other in non-clade A1 isolates. We identified four different types of large-scale genomic rearrangements and in all cases, we found insertion of two different genomic islands and an insertion element at the border. In contrast, no genomic rearrangement and insertions were identified among a group of clade A1 pet isolates, suggesting a distinct evolutionary trajectory. Based on the in silico predicted biological functions, we found a common link to a stress response for the genes encoded in three regions. This suggests that these rearrangements may reflect adaptation to the stringent conditions in the hospital environment, such as antibiotics and detergents, to which bacteria are exposed. Data summaryRaw core-genome alignment (1.1 MB, Harvest suite v1.1.2), including the 1,644 Clade A isolates and the complete E. faecium AUS0004 (accession number CP003351) as a reference is available under the following gitlab repository https://gitlab.com/sirarredondo/efm_gwes.

genomics↗

bioRxiv2018

mlplasmids: a user-friendly tool to predict plasmid- and chromosome-derived sequences for single species

Assembly of bacterial short-read whole genome sequencing (WGS) data frequently results in hundreds of contigs for which the origin, plasmid or chromosome, is unclear. Long-read sequencing has emerged as a solution to resolve plasmid structures and to obtain complete genomes for most bacterial species. This information can be used to generate and label datasets from short-read based contigs as plasmid- or chromosome-derived. We investigated the use of several popular machine learning methods to classify short-read contigs with known plasmid- or chromosome-origin from Enterococcus faecium, Klebsiella pneumoniae and Escherichia coli using pentamer frequencies. Based on resulting F1-scores we selected support-vector machine (SVM) models as best classifier for all three bacterial species (F1-score E. faecium = 0.94, F1-score K. pneumoniae = 0.90, F1-score E. coli = 0.76), which outperformed other existing plasmid tools using an independent set of isolates (precision E. faecium = 0.92, precision K. pneumoniae = 0.86, precision E. coli = 0.82). We demonstrated the scalability of our model by accurately predicting the plasmidome of a large collection of 1,644 E. faecium isolates with only short-read WGS available using a standard laptop with a single core. A low number of false positive predicted sequences suggests that the assignment of a particular gene of interest as plasmid- or chromosome-encoded by the models is plausible. The SVM classifiers are publicly available as a new R package called mlplasmids at https://gitlab.com/sirarredondo/mlplasmids under the GNU General Public License v3.0. We additionally developed a graphical-user interface using the Shiny package which can be accessed at https://sarredondo.shinyapps.io/mlplasmids/. Single genomes can easily be predicted by uploading genome assemblies. We anticipate that this tool may significantly facilitate research on the dissemination of plasmids encoding antibiotic resistance and/or contributing to host adaptation.

microbiology↗

bioRxiv2016

On the (im)possibility to reconstruct plasmids from whole genome short-read sequencing data

Plasmids are autonomous extra-chromosomal elements in bacterial cells that can carry genes that are important for bacterial survival. To benchmark algorithms for automated plasmid sequence reconstruction from short read sequencing data, we selected 42 publicly available complete bacterial genome sequences which were assembled by a combination of long- and short-read data. The selected bacterial genome sequence projects span 12 genera, containing 148 plasmids. We predicted plasmids from short-read data with four different programs (PlasmidSPAdes, Recycler, cBar and PlasmidFinder) and compared the outcome to the reference sequences.\n\nPlasmidSPAdes reconstructs plasmids based on coverage differences in the assembly graph. It reconstructed most of the reference plasmids (recall = 0.82) but approximately a quarter of the predicted plasmid contigs were false positives (precision = 0.76). PlasmidSPAdes merged 83 % of the predictions from genomes with multiple plasmids in a single bin. Recycler searches the assembly graph for sub-graphs corresponding to circular sequences and correctly predicted small plasmids but failed with long plasmids (recall = 0.12, precision = 0.30). cBar, which applies pentamer frequency composition analysis to detect plasmid-derived contigs, showed an overall recall and precision of 0.78 and 0.64. However, cBar only categorizes contigs as plasmid-derived and does not bin the different plasmids correctly within a bacterial isolate. PlasmidFinder, which searches for matches in a replicon database, had the highest precision (1.0) but was restricted by the contents of its database and the contig length obtained from de novo assembly (recall = 0.36).\n\nSurprisingly, PlasmidSPAdes and Recycler detected single isolated components corresponding to putative novel small plasmids (<10 kbp) which were also predicted as plasmids by cBar.\n\nThis study shows that it is possible to automatically predict plasmid sequences, but only for small plasmids. The reconstruction of large plasmids (>50 kbp) containing repeated sequences remains challenging and limits the high-throughput analysis of WGS data.\n\nAuthor SummaryShort read sequencing of the DNA of bacteria is often used to understand characteristics such as antibiotic resistance. However the assembly of short read sequencing data with the goal of reconstructing a complete genome is often fragmented and leaves gaps. Therefore independently replicating DNA fragments called plasmids cannot easily be identified from an assembly. Lately a number of programs have been developed to enable the automated prediction of the sequences of plasmids. Here we tested these programs by comparing their outcomes with complete genome sequences. None of the tested programs were able to fully and unambiguously predict distinct plasmid sequences. All programs performed best with the prediction of plasmids smaller than 50 kbp. Larger plasmids were only correctly predicted if they were present as a single contig in the assembly. While predictions by PlasmidSPAdes and cBar contained most of the plasmids, they were merged with or indistinguishable from other plasmids and sometimes chromosome sequences. PlasmidFinder missed most plasmids but all its predictions were correct. Without manual steps or long-read sequencing information, plasmid reconstruction from short read sequencing data remains challenging.

microbiology↗