bioRxiv Science⌕ Search
Home/Archive/bioRxiv

bioRxiv · 10.64898/2026.08.03.742560

BUsmear: A Low-Cost 3D-Printed Automated Device for Blood Smear Preparation

Pesen, T.·Karasoy, M. T.·Eren, B. C.·Akgun, B.
View original source ↗Export metadata ↓

Abstract

Uniform, reproducible blood smears are critical for reliable hematological evaluation. Manual smear preparation, however, is user-dependent and introduces variability that limits quantitative microscopy. Here we developed BUsmear, a low-cost, 3D-printed, motorized blood smear device that prepares two smears simultaneously from a printed stage and a micro-motor drive with tunable linear velocity, controlled through a joystick-operated driver module. By spreading two slides in parallel with fully repeatable slide-to-slide motion, the device doubles throughput while eliminating operator-dependent motion artifacts, and can be fabricated on any benchtop 3D printer in under one day. To validate smear quality, we analyzed blood films from three donors together with a manual smear prepared by an expert from the blood of one of the same donors, giving a matched device-versus-manual pair. Automated Cellpose segmentation of 14,046 red blood cells across 12 bright-field fields showed that cell diameter was preserved and closely matched the expert smear (6.7-7.8 um across groups, within the 6.2-8.2 um human reference range; 6.7 vs 6.9 um in the matched pair), and that all films formed non-aggregated monolayers (Clark-Evans index of aggregation 1.04-1.24). Critically, red blood cells in the device films were markedly more circular than in the expert manual smear (mean eccentricity 0.405 vs 0.502; 0.443 vs 0.502 in the matched pair), with complete separation between the two methods at the level of whole fields of view. Because eccentricity reports smear-induced cell distortion, this indicates that a constant, mechanically controlled spreading velocity preserves red blood cell morphology better than skilled manual technique. BUsmear offers an accessible route to standardized smear geometry for quantitative analysis, including AI-based morphometry, and its low cost may be particularly advantageous in low-income countries with a high prevalence of malaria.

Explore related subjects

biophysicsPreprint

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Pesen, T., Karasoy, M. T., Eren, B. C., Akgun, B.. 2026-08-09. BUsmear: A Low-Cost 3D-Printed Automated Device for Blood Smear Preparation. https://doi.org/10.64898/2026.08.03.742560

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related preprints

bioRxiv2026

Scaling of structural variability of ecDNA polymer condensates with copy number boosts and stabilises oncogene regulatory contacts

Extrachromosomal DNAs (ecDNAs) form highly heterogeneous condensates in cancer cells that drive oncogene overexpression, yet how structural variability coexists with stable gene regulation remains unclear. Here, we develop a minimal polymer physics model of MYC-harbouring COLO320-DM ecDNAs, where BRD4-like complexes bind and bridge cognate sites along ecDNA rings. Above a critical binder concentration, ecDNAs phase separate into condensates exhibiting diverse conformations because of their thermodynamic folding degeneracy. Despite this variability, condensates retain conserved interaction scaffolds that give rise to reproducible contact patterns, including in-trans associated domains (I-TADs), genomic regions enriched in intermolecular regulatory contacts between distinct ecDNAs. We find that condensate 3D architecture follows universal scaling relations with ecDNA copy number, n, remaining robust to model parameter changes. Regulatory contacts within I TADs increase linearly with n, yet they are one order of magnitude stronger than in size matched control regions outside I TADs, whereas their relative fluctuations are markedly suppressed as n increases. This scaling produces enhanced, low-noise regulatory environments for oncogenes embedded within I-TADs, such as PVT1-MYC fusions, whereas the canonical MYC copy, located outside, is less amplified as experimentally observed. Our findings reveal universal polymer physics principles underlying ecDNA condensate organization, offering a mechanistic basis for selective oncogene amplification and potential advantages in cancer progression.

biophysics↗
bioRxiv2026

High-resolution mapping of RNA structural maturation during Cas9 assembly with ABEL-FRET

The structural flexibility of RNA is essential for forming ribonucleoprotein (RNP) complexes, which regulate diverse biological processes. This intrinsic property permits RNA to act as a dynamic scaffold along the assembly pathway as it folds into a specific structure for initial recognition by protein and undergoes conformational rearrangements for functional maturation as a complex. Yet, RNA flexibility and RNP multicomponent assembly create significant obstacles for traditional structural methods. To overcome these challenges, we applied recently developed ABEL-FRET spectroscopy to measure tether-free single-molecule Forster resonance energy transfer (smFRET) over extended observation times. Furthermore, ABEL-FRET enables the unique ability for simultaneous measurements of ultrahigh resolution smFRET and hydrodynamic size of individual complexes, which offers distinct advantages for studying dynamic RNA molecules that undergo assembly via sequential binding events. Using ABEL-FRET, we explored how the guide RNA (gRNA) of CRISPR genome editing system folds and modulates its structural flexibility to carry out the roles required for each assembly state from its unbound apo form to the functional Cas9 RNP state for target DNA cleavage. Multi-perspective view of gRNA structure gained by probing its two primary functional domains enabled to capture dramatic changes in gRNA flexibility that are highly dependent on its specific structural domains as well as assembly states. Collectively, our work with ABEL-FRET highlights the intrinsic link between the structural flexibility of RNA and its functionality in RNP assembly.

biophysics↗
bioRxiv2026

De novo design of functional RNAs through higher-order interactions

Designing RNA sequences that reliably adopt functional three-dimensional structures remains a central challenge in RNA engineering because folding depends on cooperative interactions beyond canonical base pairing. Here we present DS3dRNA, an interaction-based framework for de novo RNA sequence design that combines a three-body statistical potential with physics-guided sequence sampling and supports design against multiple conformations. Across the evaluated benchmarks, DS3dRNA outperformed representative RNA inverse-design methods in native-sequence recovery and agreement between predicted and target structures. Energy-sequence-quality analyses further showed that lower design energies generally accompanied higher sequence recovery and macro-averaged F1 scores (MacroF1). Experimentally tested Mango II designs retained high-affinity fluorogenic activity, and five twister ribozyme designs yielded mean endpoint cleavage fractions of 37.7-50.6%, compared with 23.5% for the wild type. These results establish explicit higher-order interaction scoring as a complementary approach to emerging data-driven RNA design methods and provide a framework for designing functional RNAs from experimental or predicted structural ensembles.

biophysics↗