bioRxiv Science⌕ Search
Home/Archive/bioRxiv

bioRxiv · 10.1101/375451

Microfluidic study of effects of flow velocity and nutrient concentration on biofilm accumulation and adhesive strength in microchannels

Liu, N.·Skauge, T.·Landa-Marban, D.·Hovland, B.·Thorbjornsen, B.·Radu, F. A.·Vik, B. F.·Baumann, T.·Bodtker, G.
View original source ↗Export metadata ↓

Abstract

AbstractBiofilm accumulation in the porous media can cause plugging and change many physical properties of porous media. Up to now, applications of desired biofilm growth and its subsequent bioplugging have been attempted for various practices. A deeper understanding of the relative influences of hydrodynamic conditions including flow velocity and nutrient concentration, on biofilm growth and detachment is necessary to plan and analyze bioplugging experiments and field trials. The experimental results by means of microscopic imaging over a T-shape microchannel show that flow velocity and nutrient concentrations can have significant impacts on biofilm accumulation and adhesive strength in both flowing and stagnant microchannels. Increase in fluid velocity could facilitate biofilm growth, but that above a velocity threshold, biofilm detachment and inhibition of biofilm formation due to high shear stress were observed. High nutrient concentration prompts the biofilm growth, but was accompanied by a relatively weak adhesive strength. This research provides an overview of biofilm development in a hydrodynamic environment for better predicting and modelling the bioplugging associated with porous system in petroleum industry, hydrogeology, and water purification.\n\nIMPORTANCEIn the recent decade, the use of bacteria has become more and more important in many applications. Bioplugging caused by bacteria growth in porous media has been explored as a viable technique for some applications, such as bioremediation, water purification and microbial enhanced oil recovery (MEOR). In order to control biofilms/biomasses selectively/directionally plugging in desirable places, the role of hydrodynamic conditions on biofilm growth and detachment is essential to investigate. Herein, a T-shape microchannel was prepared to study effects of flow velocity and nutrient concentration on biofilm accumulation and adhesive strength at pore scale. Our results suggest that flow velocity and nutrient concentration could control biofilm accumulation in microchannels. The finding helps explain and predict the engineering bioplugging in porous media, especially for the selective plugging strategy of a MEOR field trial.

Source connections

Explore related subjects

bioengineeringPreprint

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Liu, N., Skauge, T., Landa-Marban, D., Hovland, B., Thorbjornsen, B., Radu, F. A., Vik, B. F., Baumann, T., Bodtker, G.. 2018-07-24. Microfluidic study of effects of flow velocity and nutrient concentration on biofilm accumulation and adhesive strength in microchannels. https://doi.org/10.1101/375451

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related preprints

bioRxiv2026

Material-driven fibronectin assembly enables low-dose BMP-2 to regenerate structurally mature bone in critical-sized load-bearing defects

Bone grafts for critical-sized load-bearing defects are usually judged by how much bone forms, and rarely by whether that bone is structurally and mechanically competent. Here, degradable ceramic monetites coated with poly(ethyl acrylate) (PEA) and functionalised with fibronectin (FN) and rhBMP-2 at 10-25 g/mL, 60-150-fold below the approved clinical concentration, are assessed across length scales. MicroCT showed that only monetites functionalised with rhBMP-2 bridged the defect, with a significant increase in new bone volume in both the monetite vicinity and the whole defect volume. In contrast, platelet-rich plasma (PRP) functionalisation significantly reduced bone formation relative to FN, showing that the identity of the adhesion cue, and not merely its presence, determines the outcome. Monetite degradation and increased interconnected porosity favoured bone ingrowth and produced a continuous interface between monetite and new bone. The multiscale analyses of quantitative polarised light microscopy, SAXS and nanoindentation show that PEA-coated monetites functionalised with FN and 25 g/mL rhBMP-2 promoted structurally and mechanically more mature bone, with a hierarchical organisation and local mechanical properties approaching those of native cortical tissue. In the bridged region this group recapitulated the preferential collagen fibre orientation of native cortical bone and reached an elastic modulus and hardness that were not statistically distinguishable from it, although mineral particles throughout the regenerated tissue remained thicker and less aligned than in cortical bone. Synchrotron microCT in an ovine model extended these findings to a clinically relevant scale, supporting the translational potential of the system. Taken together, these findings position PEA-coated monetites functionalised with FN and low-dose rhBMP-2 as a strategy for the structural and functional regeneration of large bone defects.

bioengineering↗
bioRxiv2026

N-GLYcanyzer monitoring of a microperfusion process reveals critical parameters' impact on Trastuzumab biosimilar N-glycoform time evolution

Controlling monoclonal antibody (mAb) N-glycosylation as a critical quality attribute (CQA) remains challenging in continuous and intensified biomanufacturing, where conventional end-point analyses obscure dynamic pathway responses. Here, we deployed the N-GLYcanyzer process analytical technology (PAT) for automated monitoring of a microperfusion process that reveals critical parameters' impact on Trastuzumab biosimilar N-glycoform time evolution across a 20-day culture duration of Chinese Hamster Ovary (CHO) cells in a ~2 mL scale-down microbioreactor perfusion platform. Using offline PAT assays combined with our integrated at-line PAT workflow, we systematically screened six perfusion process parameters: carbon source, viable cell density (VCD), perfusion rate, temperature, and pH. While nutrient limitation and thermal/acidic stress significantly disrupted N-glycans maturation, notably triggering high-mannose (Man5) accumulation and severe productivity penalties under pH 6.7 and 39 {degrees}C operation, targeted feed supplementation with galactose and MnCl2 consistently shifted glycoform profiles away from G0F toward galactosylated species (G1F, G1F', G2F). Crucially, coupling this combined feed strategy with an intensified perfusion rate (1.2 VVD) achieved a sustained, desired galactosylation shift without a productivity cost. These findings demonstrate that nutrient feed composition and perfusion rate are primary levers for steering continuous intensified microperfusion processes for biologics production with desired N-glycoform states and highlight the utility of automated at-line PAT like N-GLYcanyzer for enabling real-time attribute-based control in continuous biomanufacturing.

bioengineering↗
bioRxiv2026

Differential sensing with imprinted and non-imprinted organic electrochemical transistors reduces calibration drift in wearable sweat cortisol sensors

The output of a wearable cortisol sensor drifts over days for reasons unrelated to cortisol, so a calibration made on the first day soon stops being valid. In our differential organic electrochemical transistor, a PEDOT:PSS transistor coated with a molecularly imprinted polymer (MIP) for cortisol is paired with one coated with a non-imprinted polymer (NIP) of the same composition, and the NIP response is subtracted. Over four calibrations in artificial sweat across 14 days, the response of the MIP alone shifted by 15% to 22% of its range on day 1, whereas the differential output shifted by 1% to 10%, and the variation between days at 1 to 10nM fell by 65% to 70% on average for individual pairs. In sweat from one participant, read against the calibration from day 1, both outputs tracked the direction of visible changes in salivary cortisol, while the MIP alone diverged from the differential output, consistent with the laboratory drift.

bioengineering↗