bioRxiv Science⌕ Search

bioRxiv · 10.1101/2025.06.07.657281

Breakthrough in Functional Muscle Regeneration: Biomimetic Collagen Scaffold Restores Abdominal Wall Defects in a VML-rabbit Model

Abstract

Functional regeneration of volumetric muscle loss (VML) remains a significant challenge in the field of regenerative medicine. We have developed a novel biomimetic scaffold (0.4 mm thick hernia patch) derived from soluble collagen. This biomimetic scaffold exhibits exceptional strength, low immunogenicity, and structurally mimics the natural muscle fiber arrangement. The scaffold is utilized to repair a VML rabbit model (30 x 30 mm defect in abdominal wall) using nylon sutures for connection. It was observed that the VML site was gradually covered by regenerated tissue, which consisted of 2-3 mm thick functional muscle. By 32 weeks post-surgery, the newly formed muscle tissue had covered the majority of the VML area, as evidenced by morphological observations and histological evaluations. Approximately 24 weeks after surgery, the scaffold underwent complete degradation. This degradation exhibited a strong correlation with muscle regeneration. Furthermore, it was observed that the nylon sutures gradually migrated towards the VML center as muscle regeneration progressed, and nylon sutures exhibited an adverse impact on muscle regeneration.. The study did not employ exogenous cells or growth factors. However, the collagen scaffold effectively stimulated endogenous muscle regeneration. In contrast to the previous limited partial recovery or fibrotic scar healing, the collagen scaffold successfully induced genuine structural and functional muscle regeneration. The 0.4 mm thick scaffold (hernia patch) exhibits a different structure from the 2-3 mm thick natural abdominal muscle wall. This suggests that a simple scaffold can regenerate functional tissue with a complex structure. This research represents the first successful functional regeneration of VML in clinically relevant animal models through the utilization of artificial materials. This technology possesses transformative potential in the treatment of muscle defects arising from trauma, tumor resection, hernia, or congenital anomalies. Furthermore, it holds substantial medical potentials in addressing neuromuscular diseases, such as Duchenne muscular dystrophy (DMD), amyotrophic lateral sclerosis (ALS), and spinal muscular atrophy (SMA), by collaborating with advanced technologies including CRISPR-Cas9, adeno-associated virus (AAV) gene therapy, and stem cell technology.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

He, X., Luo, Z., He, S.. 2025-06-08. Breakthrough in Functional Muscle Regeneration: Biomimetic Collagen Scaffold Restores Abdominal Wall Defects in a VML-rabbit Model. https://doi.org/10.1101/2025.06.07.657281

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related preprints

Dynamic Compression Platform for Live Imaging of Scaffold-Transmitted Cellular Mechanoresponses

Mechanical characterization of biomaterial scaffolds is essential to evaluate their capacity to meet the functional demands of target tissues in tissue engineering and regenerative medicine applications. Scaffolds designed to interface with living tissues must support the transmission of mechanical cues to resident cells and stimulate mechanosignaling pathways that are essential to their function. In joints, bone and cartilage cells act as primary mechanosensors, converting mechanical stimuli into biochemical signals that regulate tissue homeostasis and remodelling. Therefore, evaluating cellular mechanoresponses to scaffold-transmitted compression in vitro can inform the development of functional tissue-engineered constructs. For example, poly({epsilon}-caprolactone) (PCL) scaffolds are highly relevant for bone and cartilage tissue engineering due to their biocompatibility, stable mechanical properties and slow degradation. Here, we applied a custom-built device to study compression-induced mechanosignaling in MC3T3-E1 pre-osteoblast cells. The device is composed of a polydimethylsiloxane (PDMS) pillar, a force-sensing load cell, and a piezoelectric linear track. A protocol is described in which MC3T3-E1 cells are repeatedly compressed, while in parallel live tracking of force measurements and live imaging of intracellular calcium dynamics in MC3T3-E1 cells are recorded. PCL scaffolds fabricated by melt electrowriting (MEW) were subsequently integrated into the platform. Scaffold-transmitted compression triggered dynamic increases in cytosolic calcium; in MC3T3-E1 cells located directly under the PCL microfibers, but also in cells located in the interfiber spaces. This device and workflow facilitate in vitro investigations of real-time cellular mechanoresponses to dynamic compression applied with biomaterial scaffolds, and provides a testing platform for evaluating the mechanotransductive properties of scaffolds intended for tissue engineering applications.

bioengineering↗

Ultrasound Tracking Reveals Progressive Regional Strain Differences in Human Achilles Tendons During Fatigue Loading

Ultrasound is commonly used to assess structural changes in symptomatic Achilles tendons, but quantitative biomechanical metrics for progressive tendon deterioration remain limited. The goal of this study was to develop and validate an automated ultrasound tracking algorithm for regional tendon deformation and evaluate strain progression in survived and ruptured tendons during fatigue loading. We hypothesized that maximum strain, average strain, and strain heterogeneity would exhibit different trajectories between groups. Ten cadaveric Achilles tendons underwent cyclic loading with stress tests every 500 cycles until rupture or 150,000 cycles. Ultrasound images acquired during stress tests were analyzed using an automated tracking algorithm to generate spatially resolved regional strain fields. Ultrasound-derived bulk strain was highly correlated with actuator-derived strain in survived (R^2 = 0.968 +/- 0.017) and ruptured tendons (R^2 = 0.972 +/- 0.014). Maximum and average longitudinal strains progressively diverged between groups across fatigue life (Group x FatigueLife: p = 0.003 and p < 0.0001, respectively). During the first 10,000 cycles, average strain decreased in survived tendons ({beta} = -0.0268%, p = 0.0215) but not ruptured tendons ({beta} = 0.0147%, p = 0.1197), with a significant Group x Cycle interaction (p = 0.0061). This study demonstrates that the algorithm quantified Achilles tendon deformation with high fidelity and enabled spatially resolved strain assessment throughout fatigue loading. Maximum and average strain followed different trajectories between groups, whereas strain heterogeneity did not. Early differences in tendon biomechanics suggest that regional strain behavior may change before pronounced differences in absolute magnitude develop.

bioengineering↗

Brain organoid computing for robotic decision-making

Biomimicry has inspired the evolution of robotics toward greater autonomy, adaptability, and symbiosis with humans and dynamic environments. However, current robotic systems still face major challenges in recapitulating the high-efficiency decision-making capabilities of the human brain under complex and dynamic conditions. Here, we present Brainobot, a biohybrid robotic system that establishes a brain organoid controller as a high-level robotic decision-making layer for closed-loop embodiment. By leveraging brain organoid reservoir computing, Brainobot interacts with dynamic environments by receiving and processing sensory inputs and generating motor actions. As a proof-of-concept demonstration, Brainobot is implemented in a humanoid robotic system to perform real-world tasks, including object grasping and laser chasing. Interestingly, Brainobot exhibits unique features, including cross-task adaptivity, high computing efficiency, and low energy consumption. Thus, our approach may provide insights for advancing robotic embodiment and understanding biological decision-making.

bioengineering↗