bioRxiv Science⌕ Search
Home/Archive/bioRxiv

bioRxiv · 10.1101/2023.12.16.572002

The effect of variable inertial resistance on force, velocity, power and muscle activation during a chest press exercise.

Zoffoli, L.·Biscarini, A.·Zanuso, S.
View original source ↗Export metadata ↓

Abstract

This study investigated the effect of the inertial component of the resistance (INERTIA) at different intensity levels (LOAD ) on force (FORCE ), velocity (VELOCITY ), power (POWER), and the muscle activity of the pectoralis major (EMGPM), anterior deltoid (EMGDA) and triceps brachii (EMGTB) muscles during a chest press exercise. A motor-driven exercise apparatus was programmed to offer resistance with different inertial profiles over the range of movement (ROM ): gravitational-type constant inertia (IFULL); no-inertia (IZERO); linearly descending inertia along the ROM (IVAR). Nine healthy adults performed five, maximal-effort, explosive movements with each inertial profile at 30, 50 and 70% of their 1 repetition maximum. Meanwhile, the EMGPM, EMGDA and EMGTB signals were obtained jointly with the FORCE, VELOCITY and POWER readings returned by the exercise apparatus. One-dimensional statistical non-parametric maps based on 2-way repeated measures ANOVA (SnPM ) were employed to evaluate the effect of LOAD and INERTIA on the collected timeseries. Paired t-tests were then used as post-hoc tests on the portions of the ROM denoting significant differences in the SnPM. Higher LOAD resulted in elevated outcomes over large portions of the ROM in all the investigated timeseries. Compared to IFULL, IZERO allowed greater VELOCITY at the cost of lower FORCE throughout the ROM, while IVAR, despite the lower VELOCITY than IZERO, resulted in higher FORCE and POWER output. In addition, IZERO and IVAR elevated EMGTB at the end of the ROM with respect to IFULL. IVAR overcame both IFULL and IZERO in terms of FORCE and POWER, which indicates that variable inertial profiles might be effectively integrated into resistance exercise programs. Ultimately, this study suggested that INERTIA acts independently to the imposed LOAD on the FORCE, VELOCITY and POWER production. Coaches and therapists are encouraged to account for the type of INERTIA as one of the parameters considered during the exercise selection for their athletes or patients.

Explore related subjects

bioengineeringPreprint

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Zoffoli, L., Biscarini, A., Zanuso, S.. 2023-12-17. The effect of variable inertial resistance on force, velocity, power and muscle activation during a chest press exercise.. https://doi.org/10.1101/2023.12.16.572002

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related preprints

bioRxiv2026

Dynamic Compression Platform for Live Imaging of Scaffold-Transmitted Cellular Mechanoresponses

Mechanical characterization of biomaterial scaffolds is essential to evaluate their capacity to meet the functional demands of target tissues in tissue engineering and regenerative medicine applications. Scaffolds designed to interface with living tissues must support the transmission of mechanical cues to resident cells and stimulate mechanosignaling pathways that are essential to their function. In joints, bone and cartilage cells act as primary mechanosensors, converting mechanical stimuli into biochemical signals that regulate tissue homeostasis and remodelling. Therefore, evaluating cellular mechanoresponses to scaffold-transmitted compression in vitro can inform the development of functional tissue-engineered constructs. For example, poly({epsilon}-caprolactone) (PCL) scaffolds are highly relevant for bone and cartilage tissue engineering due to their biocompatibility, stable mechanical properties and slow degradation. Here, we applied a custom-built device to study compression-induced mechanosignaling in MC3T3-E1 pre-osteoblast cells. The device is composed of a polydimethylsiloxane (PDMS) pillar, a force-sensing load cell, and a piezoelectric linear track. A protocol is described in which MC3T3-E1 cells are repeatedly compressed, while in parallel live tracking of force measurements and live imaging of intracellular calcium dynamics in MC3T3-E1 cells are recorded. PCL scaffolds fabricated by melt electrowriting (MEW) were subsequently integrated into the platform. Scaffold-transmitted compression triggered dynamic increases in cytosolic calcium; in MC3T3-E1 cells located directly under the PCL microfibers, but also in cells located in the interfiber spaces. This device and workflow facilitate in vitro investigations of real-time cellular mechanoresponses to dynamic compression applied with biomaterial scaffolds, and provides a testing platform for evaluating the mechanotransductive properties of scaffolds intended for tissue engineering applications.

bioengineering↗
bioRxiv2026

Ultrasound Tracking Reveals Progressive Regional Strain Differences in Human Achilles Tendons During Fatigue Loading

Ultrasound is commonly used to assess structural changes in symptomatic Achilles tendons, but quantitative biomechanical metrics for progressive tendon deterioration remain limited. The goal of this study was to develop and validate an automated ultrasound tracking algorithm for regional tendon deformation and evaluate strain progression in survived and ruptured tendons during fatigue loading. We hypothesized that maximum strain, average strain, and strain heterogeneity would exhibit different trajectories between groups. Ten cadaveric Achilles tendons underwent cyclic loading with stress tests every 500 cycles until rupture or 150,000 cycles. Ultrasound images acquired during stress tests were analyzed using an automated tracking algorithm to generate spatially resolved regional strain fields. Ultrasound-derived bulk strain was highly correlated with actuator-derived strain in survived (R^2 = 0.968 +/- 0.017) and ruptured tendons (R^2 = 0.972 +/- 0.014). Maximum and average longitudinal strains progressively diverged between groups across fatigue life (Group x FatigueLife: p = 0.003 and p < 0.0001, respectively). During the first 10,000 cycles, average strain decreased in survived tendons ({beta} = -0.0268%, p = 0.0215) but not ruptured tendons ({beta} = 0.0147%, p = 0.1197), with a significant Group x Cycle interaction (p = 0.0061). This study demonstrates that the algorithm quantified Achilles tendon deformation with high fidelity and enabled spatially resolved strain assessment throughout fatigue loading. Maximum and average strain followed different trajectories between groups, whereas strain heterogeneity did not. Early differences in tendon biomechanics suggest that regional strain behavior may change before pronounced differences in absolute magnitude develop.

bioengineering↗
bioRxiv2026

Brain organoid computing for robotic decision-making

Biomimicry has inspired the evolution of robotics toward greater autonomy, adaptability, and symbiosis with humans and dynamic environments. However, current robotic systems still face major challenges in recapitulating the high-efficiency decision-making capabilities of the human brain under complex and dynamic conditions. Here, we present Brainobot, a biohybrid robotic system that establishes a brain organoid controller as a high-level robotic decision-making layer for closed-loop embodiment. By leveraging brain organoid reservoir computing, Brainobot interacts with dynamic environments by receiving and processing sensory inputs and generating motor actions. As a proof-of-concept demonstration, Brainobot is implemented in a humanoid robotic system to perform real-world tasks, including object grasping and laser chasing. Interestingly, Brainobot exhibits unique features, including cross-task adaptivity, high computing efficiency, and low energy consumption. Thus, our approach may provide insights for advancing robotic embodiment and understanding biological decision-making.

bioengineering↗