bioRxiv Science⌕ Search
Home/Archive/bioRxiv

bioRxiv · 10.1101/2021.11.12.468264

A new approach to the determination of tubular membrane capacitance: passive membrane electrical properties under reduced electrical conductivity of the extracellular solution

Simurda, J.·Simurdova, M.·Svecova, O.·Bebarova, M.
View original source ↗Export metadata ↓

Abstract

The tubular system of cardiomyocytes plays a key role in excitation-contraction coupling. To determine the area of the tubular membrane in relation to the area of the surface membrane, indirect measurements through the determination of membrane capacitances by electrophysiological measurements are currently used in addition to microscopic methods. Unlike existing electrophysiological methods based on an irreversible procedure (osmotic shock), the proposed approach uses a reversible short-term intermittent increase in the electrical resistance of the extracellular medium. The resulting increase in the lumen resistance of the tubular system makes it possible to determine separately capacitances of the tubular and surface membranes from altered capacitive current responses to subthreshold voltage-clamped rectangular pulses. Based on the analysis of the time course of capacitive current, computational relations were derived which allow to quantify elements of the electrical equivalent circuit of the measured cardiomyocyte including both capacitances. The exposition to isotonic low-conductivity sucrose solution is reversible which is the main advantage of the proposed approach allowing repetitive measurements on the same cell under control and sucrose solutions. In addition, it might be possible to identify changes in both surface and tubular membrane capacitances caused by various interventions. Preliminary experiments in rat ventricular cardiomyocytes (n = 10) resulted in values of the surface and tubular capacitances 72.3 {+/-} 16.4 and 42.1 {+/-} 14.7 pF, respectively, implying the fraction of tubular capacitance/area of 0.36 {+/-} 0.08. We conclude that the newly proposed method provides results comparable to those reported in literature and, in contrast to the currently used methods, enables repetitive evaluation of parameters describing the surface and tubular membranes. It may be used to study alterations of the tubular system resulting from various interventions including associated cardiac pathologies. Author summaryThe cell membrane of cardiomyocytes is invaginated forming a net of tubules through the whole cell (the tubular system). These invaginations are essential for the coordinated contraction of cardiomyocytes. Various cardiac diseases may lead to an alteration of the tubular system and vice versa alteration of the tubular system may result in cardiac dysfunction. Therefore, it is desirable to investigate the tubular membrane separately. Unfortunately, it is not easy and methods currently used for this purpose provide diverse results. The widely used detubulation methods (separating the tubular and surface membrane by an osmotic shock) are irreversible. It makes impossible repeated measurements on the same cell, thus, disabling evaluation of parameters describing the surface and tubular membranes and particularly testing changes in the tubular system. We developed an alternative approach based on the electrical separation of the tubular and surface membranes induced by exposition of the cardiomyocyte to an isotonic sucrose solution with low electrical conductivity. It allows to quantify the approximate area of the surface and tubular membrane using evaluation of electrical capacitance of both membrane areas. Measurements can be repeated several times on the same cell.

Source connections

Explore related subjects

biophysicsPreprint

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Simurda, J., Simurdova, M., Svecova, O., Bebarova, M.. 2021-11-13. A new approach to the determination of tubular membrane capacitance: passive membrane electrical properties under reduced electrical conductivity of the extracellular solution. https://doi.org/10.1101/2021.11.12.468264

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related preprints

bioRxiv2026

Design of colipids with controlled lateral distance of head group moieties for targeting strategies in the field of lipid-based nanoparticles

Lipid nanoparticles and liposomes are nanoparticle drug formulations which are firmly established in clinics. In order to expand their application and improve efficacy, surface modifications can be a key strategy, especially for cell specific targeting. Targeting can be achieved by integrating ligand functionalized lipids or lipidoids on the nanoparticle surface. In this case, not solely the targeting ligand itself, but also the structure of the whole targeting lipid/lipidoid can affect the interaction of the targeting ligand with the binding motive on cells. Especially, distal spacer structures between lipid anchor and ligand unit, often composed of polyethylene glycol chains, provide a certain distance of the ligand from the nanoparticle surface. A concept which is currently neglected is the control of the lateral distance between ligand structures on the nanoparticle. Herein we investigated the possibility to design lipidoids with a lateral spacer composed of polyethylene glycol units. We synthesized and characterized different lipidoids which provide a primary amine in the head group for possible ligand coupling. In our model lipidoids the head groups were functionalized with a paramagnetic probe to apply electron paramagnetic resonance (EPR) methods for the characterization of the lipidoid interaction with model nanoparticles, in our case liposomes. Continuous wave EPR was used to study the efficiency of the novel lipidoids to integrate into lipid bilayers of model liposomes, which was shown to depend on lipidoid structure and liposome composition. Furthermore, using double electron-electron resonance (DEER), we observed lipidoid conformational changes occurring upon integration into liposomes.

biophysics↗
bioRxiv2026

Binding mechanisms of therapeutic antibodies to human claudin-18.2

Claudin-18.2 (CLDN18.2) is a tight junction component with highly restricted expression in the paracellular space of nonmalignant gastric epithelial cells. It becomes accessible on tumor cell surface during malignant transformation, making CLDN18.2 an attractive target for targeted therapies against gastric cancer. Recently, zolbetuximab has become the first FDA-approved monoclonal antibody that targets CLDN18.2 in advanced gastric cancer, and others like osemitamab have entered phase 3 clinical trials. However, the high-resolution structure of CLDN18.2 is lacking, and how CLDN18.2 is recognized by therapeutic antibodies remains undefined. Here, we report cryo-EM structures of human claudin-18.2 (hCLDN18.2) in complex with the Fab fragments of zolbetuximab and osemitamab, revealing the structure of hCLDN18.2 and its binding mechanism to the therapeutic antibodies. Further analyses reveal that three residues in the first extracellular loop of hCLDN18.2 that are different from human claudin-18.1 (hCLDN18.1) play a critical role in antibody binding. Our data elucidate the structural basis for selective binding of therapeutic antibodies to hCLDN18.2, which should aid rational design of next-generation immunotherapies targeting hCLDN18.2.

biophysics↗
bioRxiv2026

Structural relationships between the SLC12 cotransporter C-terminal domain, universal stress proteins and adenylating enzymes

Several SLC12 cotransporters bind ATP in a cytoplasmic C-terminal domain (CTD). We analysed 16,192 CTD-containing SLC12 sequences and compared 42,845 representative structures to examine the relationship between this nucleotide site, universal stress proteins (USPs) and adenylating enzymes. In phosphorylated NKCC1, D891 and D927 lie near the ATP phosphate chain, while R801 and K889 form a basic phosphate-binding clamp. NKCC1 retains this arrangement, whereas KCC paralogs replace or lose several corresponding groups. In structural comparisons with USP and adenylating-enzyme references, both CTD lobes score between universal stress proteins and EC-annotated domains, and the two lobes form separate lineages that include bacterial transporters. Lobe-specific and nucleotide-frame comparisons place ATP in the corresponding structural region used for -phosphate chemistry by catalytic members of this fold. Published work on UspG provides a precedent for protein-bound AMP in a natural USP. In the examined SLC12 structures and USP models, candidate protein hydroxyls lack an in-line geometry for attack at ATP P. Protein adenylation would require a change in protein or nucleotide geometry, or a different acceptor. These results define a structural basis for testing conditional protein adenylation at SLC12 nucleotide sites. The required evidence is a covalent protein-AMP adduct, identification of its acceptor and measurement of the expected pyrophosphate coproduct, with soluble nucleotide analysis to distinguish accompanying ATP reactions.

biophysics↗