bioRxiv Science⌕ Search
Home/Archive/bioRxiv

bioRxiv · 10.1101/2021.06.10.447989

Cargo surface fluidity reduces inter-motor interference, promotes load-sharing and enhances run-lengths in an ATP dependent manner

Sarpangala, N.·Gopinathan, A.
View original source ↗Export metadata ↓

Abstract

In cells, multiple molecular motors work together as teams to carry cargoes such as vesicles and organelles over long distances to their destinations by stepping along a network of cytoskeletal filaments. How motors that typically mechanically interfere with each other, work as teams is unclear. Here we explored the possibility that purely physical mechanisms may potentially enhance teamwork, both at the single motor and cargo level. To explore these mechanisms, we developed a 3D dynamical simulation of cargo transport along microtubules by teams of canonically non-cooperative kinesin-1 motors. We accounted for cargo membrane fluidity by explicitly simulating the Brownian dynamics of motors on the cargo surface and considered both the load and ATP dependence of single motor functioning. We showed explicitly, for the first time, that surface fluidity leads to the reduction of negative mechanical interference between kinesins, enhancing load sharing thereby decreasing single motor off-rates and increasing processivity. Remarkably, we also showed that, independent of fluidity, increasing numbers of bound motors pull the cargo closer to the microtubule, increasing the on-rates of individual unbound motors, resulting in a cooperative increase in bound motor numbers that depends on 3D cargo geometry. At the cargo level, surface fluidity makes more motors available for binding, though this effect is significant only at low ATP or high motor density. Interestingly, we find that the fluidity induced reduction in mechanical interference dominates over the increased availability of motors for typical physiological and in vitro conditions, this allowing us to reconcile different experimental results in different regimes. Finally, we show that these effects can altogether result in enhanced mechanical efficiency and tunable cargo run-lengths for teams of molecular motors over physiological ranges of fluidity with implications for new experimental validation efforts, transport in vivo, artificial cargo design and multi-motor-driven mechanical processes in general. Author summaryIn cells, multiple molecular motors work together as teams to carry cargoes such as vesicles and organelles over long distances to their destinations by stepping along a network of protein filaments. How do intrinsically non-cooperative motors function as teams within cells? In this paper, we show, using computer simulations, that the fluid surfaces of cellular cargo reduce the mechanical interference between motors allowing better load sharing and decreasing their detachment rates, thereby increasing the distance over which they can carry cargo. We additionally found that motors pull cargo closer to the filament increasing the attachment rates of other unbound motors. These effects act synergistically with an increased availability of motors due to fluidity to further increase travel distances. Our simulation model accounted for the dynamics of the motors on the cargo surface and their load and ATP dependent kinetics, allowing us to connect single motor properties to overall transport. Our work on understanding how teamwork arises in mechanically coupled motors sheds new light on cellular processes, reconciles existing observations, encourages new experimental validation efforts and can also suggest new ways of improving mechanical efficiency and transport of artificial cargo powered by motor teams.

Explore related subjects

biophysicsPreprint

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Sarpangala, N., Gopinathan, A.. 2021-06-11. Cargo surface fluidity reduces inter-motor interference, promotes load-sharing and enhances run-lengths in an ATP dependent manner. https://doi.org/10.1101/2021.06.10.447989

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related preprints

bioRxiv2026

Autonomous Homeostatic Synthetic Cells via Self-Gating DNA Nanopores

Homeostasis is a fundamental hallmark of living organisms, arising from the complex interplay between biochemical reactions and regulatory feedback systems. Reconstituting such self-regulating behaviour in minimal synthetic cells enables continuous, persistent operation of biochemical reactions for extended amount of time. In this work, we demonstrate a minimal homeostatic synthetic cell capable of autonomous flux regulation using DNA nanotechnology and bottom-up synthetic biology. Our homeostatic architecture consists of Giant Unilamellar Vesicles (GUVs) equipped with gated DNA nanopores, encapsulated in vitro transcription (IVT) machinery, and an RNA degradation system. We achieve homeostasis under varying external chemical stimuli specifically varying concentrations of rNTPs by implementing a negative feedback loop between rNTP influx and RNA production. In our system, DNA nanopores facilitate the influx of rNTPs from the external environment, driving internal transcription. Crucially, the transcription process generates RNA "blockers" designed to bind and gate the DNA nanopores, thereby attenuating further rNTP influx. Our system is dynamic as encapsulated RNases slowly degrade the RNA blockers, allowing the pores to reopen as blocker concentration goes down. We first characterise the functionality and gating efficiency of the DNA nanopores using both pre-synthesised and in situ produced DNA and RNA blockers. We then demonstrate that rNTP flux through these pores is sufficient to drive IVT within the GUVs. Finally, by integrating these modules, we demonstrate robust homeostasis: the system maintains a steady-state level of RNA production for up to 16 hours. By harnessing the controllability of negative feedback loop, we demonstrate thresholding of the homeostasis level using single-stranded regulator DNA. This work establishes a versatile framework for engineering adaptive and self-sustaining responsive nanomaterials and synthetic cell chassis.

biophysics↗
bioRxiv2026

A Generic Numbering Scheme for TMEM16 Scramblases

The TMEM16 family of calcium-activated phospholipid scramblases (CaPLSs) and chloride channels (CaCCs) performs diverse physiological functions that include regulation of blood coagulation and apoptotic signaling, through a shared ten-transmembrane-helix (TM) architecture organized around a hydrophilic lipid-translocating groove. Mechanistic studies of TMEM16 family members have been hampered by the absence of a unified positional reference framework that would permit direct comparison of structurally equivalent residues across paralogs with different sequence numbering systems. Here we introduce a generic numbering scheme for TMEM16 scramblases (GNS-TMEM16), modeled on the Ballesteros & Weinstein system established for class A G protein-coupled receptors. A reference alignment (TMEM16-RA) was constructed from twelve human and mouse TMEM16 scramblases (TMEM16C/D/E/F/G/J) using structure-based ClustalW alignment of the ten TM helices. From this alignment, a TM-specific reference residue (TsRR) was identified for each helix by hierarchical application of three criteria: (1) 100% conservation in the core TMEM16-RA; (2) conservation in an augmented reference alignment (TMEM16-ARA) incorporating a group of phylogenetically more distant homologs composed of nhTMEM16, afTMEM16, TMEM16K, TMEM16A, and TMEM16B; and (3) structural and functional considerations, including helix-perturbing character, groove localization, conserved motif membership, and central TM position. The resulting ten TsRRs are Y1.50, W2.50, R3.50, E4.50, F5.50, P6.50, E7.50, D8.50, W9.50, and E10.50, and are illustrated in mTMEM16F. Each residue is assigned the identifier N.m(k), where N is the TM number, m is the position relative to the TsRR (for which m = 50), and k is the absolute sequence number. Loop residues receive dual identifiers referenced to the TsRRs of both flanking helices. Application of the GNS-TMEM16 is illustrated with the comparisons of the groove-opening measurements using pairwise distances between residues identified by their N.m indices to be corresponding across mTMEM16F, afTMEM16, and nhTMEM16. The results bring to light the advantages of corresponding residues identification in different TMEM16 proteins and show that the mammalian scramblase undergoes substantially larger separation at the extracellular groove entrance than either fungal homolog. Comparison of mutagenesis data guided by N.m correspondence shows at the conserved (E3.55,R6.26) salt-bridge locus, Ala substitution reduces activity more than 100-fold in nhTMEM16 but less than 2-fold in afTMEM16, illustrating that the GNS identifies structural equivalence of position without implying functional equivalence of the residue, which is a distinct advantage of GNS in providing mechanistic interpretation across paralogs. Also described is a protocol for extending the GNS-TMEM16 to uncharacterized protein sequences, including AlphaFold-predicted models, using structural superposition to mTMEM16F. Thus, the presented GNS-TMEM16 provides a stable positional reference for the integration and comparative analysis of structural, computational, and functional data across the TMEM16 family, utilizing a construction strategy applicable to yet other polytopic membrane protein families sharing a common transmembrane fold.

biophysics↗
bioRxiv2026

An agent-based 3D model of non-genetic adaptation in cancer tissues under electrical, mechanical, and hypoxic stress

Non-genetic adaptation enables cancer cells to alter their phenotype under stress without requiring new mutations. However, the mechanisms by which electrical, mechanical, and hypoxic cues combine to shape this process in 3D tissues remain poorly understood. This work presents an agent-based tumor model that integrates vascular oxygen supply, a globally imposed electric field, mechanically mediated crowding and compression cues, phenotype transitions, cell growth, mitosis, death, and inheritance of adaptive memory across division. The simulated tumors exhibit a three-stage trajectory consisting of necrosis onset, transient collapse of live mass, and partial regrowth accompanied by progressive accumulation of adapted cells. Continuous electrical stimulation produces a dose-dependent reduction in live mass while markedly increasing the adapted fraction, with comparatively limited changes in final necrotic burden. This response is strongly conditioned by mechanics and reshapes (and is reshaped by) adaptive capacity. Pulsed stimulation further shows that, in the model, electric field amplitude and temporal schedule jointly determine memory phenomena, phenotypic diversification, and growth recovery. These results show that coupling local oxygen availability, mechanical constraints, electrical forcing, and history-dependent phenotype transitions can generate distinct tissue-level patterns of phenotypic heterogeneity. Both stimulus magnitude and temporal protocol influenced the resulting population structure, suggesting that the history of physical stress may be an important determinant of adaptive dynamics in spatially organized tumor models.

biophysics↗