Integrated cycles for urban biomass as a strategy to promote a CO2-neutral society - A feasibility study

Meinusch, N.; Kramer, S.; Koerner, O.; Seick, I.; Wiese, J.; Beblek, A.; Berges, R.; Illenberger, B.; Illenberger, M.; Uebbing, J.; Wolf, M.; Saake, G.; Benndorf, D.; Reichl, U.; Heyer, R.

doi:10.1101/2021.04.22.440727

bioRxiv · 10.1101/2021.04.22.440727

Integrated cycles for urban biomass as a strategy to promote a CO2-neutral society - A feasibility study

Meinusch, N.·Kramer, S.·Koerner, O.·Seick, I.·Wiese, J.·Beblek, A.·Berges, R.·Illenberger, B.·Illenberger, M.·Uebbing, J.·Wolf, M.·Saake, G.·Benndorf, D.·Reichl, U.·Heyer, R.

View original source ↗Export metadata ↓

Abstract

Progressive global warming is one of the biggest challenges civilization is facing today. The establishment of a carbon dioxide (CO2)-neutral society based on sustainable value creation cycles is required to stop this development. The Integrated Cycles for Urban Biomass (ICU) concept is a new concept towards a CO2-neutral society. The integration of closed biomass cycles into residential buildings enable efficient resource utilization and avoid transport of biowaste. In this scenario, biowaste is degraded on-site into biogas that is converted into heat and electricity. The liquid fermentation residues are upgraded by nitrification processes (e.g., by a soiling(R)-process, EP3684909A1) to refined fertilizer, which can be used subsequently in house-internal gardens to produce fresh food for residents. Whereas this scenario sounds promising, comprehensive evaluations of produced amounts of biogas and food, saved CO2 and costs as well as social-cultural aspects are lacking. To assess these points, a feasibility study was performed, which estimated the material and energy flows based on simulations of the biogas process and food production. The calculations show that a residential complex with 100 persons can generate 21 % of the annual power (electrical and heat) consumption from the accumulated biowaste. The nitrogen (N) in the liquid fermentation residues enables the production of up to 6.3 t of fresh mass of lettuce per year in a 70 m2 professional hydroponic production area. The amount of produced lettuce corresponds to the amount of calories required to feed four persons for one year. Additionally, due to the reduction of biowaste transport and the in-house food and fertilizer production, 6 468 kg CO2-equivalent (CO2-eq) per year are saved compared to a conventional building. While the ICU concept is technically feasible, its costs are still 1.5 times higher than the revenues. However, the model predictions show that the ICU concept becomes economically feasible in case food prices further increase and ICU is implemented at larger scale, e.g.; at the district level. Finally, this study demonstrates that the ICU implementation can be a worthwile contribution towards a sustainable CO2-neutral society and enable to decrease the demand for agricultural land.

Source connections

Published article ↗

Explore related subjects

bioengineering Preprint

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Meinusch, N., Kramer, S., Koerner, O., Seick, I., Wiese, J., Beblek, A., Berges, R., Illenberger, B., Illenberger, M., Uebbing, J., Wolf, M., Saake, G., Benndorf, D., Reichl, U., Heyer, R.. 2021-04-22. Integrated cycles for urban biomass as a strategy to promote a CO2-neutral society - A feasibility study. https://doi.org/10.1101/2021.04.22.440727

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related preprints

bioRxiv2026

Engineered microvessel networks -- Longitudinal transcriptomic profiling validates chip-grown tissues as a robust model for studying vasculature

Vascularised Organ-on-Chip (OoC) models are promising New Approach Methodologies (NAMs), but their translation requires validation for defined Contexts of Use (CoU). Here, we combine microfluidic microvessel networks (MVNs) with longitudinal bulk and single-cell RNA sequencing to determine how cell provenance influences engineered vascular phenotype. Stromal cell identity produced distinct network architectures and transcriptional trajectories, demonstrating that support cells, commonly treated as interchangeable, represent an important CoU variable. Primary human pancreatic microvascular endothelial cells failed to form stable perfusable networks, but supplementation with 10% Human Umbilical Vein Endothelial Cells (HUVECs) or Blood Outgrowth Endothelial Cells (BOECs) rescued self-assembly. Single-cell transcriptomics identified specialised endothelial populations associated with vascular morphogenesis, including tip, stalk, phalanx, endothelial to mesenchymal transition (EndMT) and pericyte-like endothelial cells. Failed networks lacked coherent endothelial specialisation, whereas rescued networks restored stabilising cell states and revealed FLRT2--UNC5B signalling within pericyte-like HUVECs, recapitulating a pathway implicated in angiogenic development in vivo. These findings establish cell provenance as a critical determinant of microvascular NAM performance and demonstrate how transcriptomic validation can define and strengthen the biological relevance of microvessel-on-chip models for specific CoUs.

bioengineering↗

bioRxiv2026

Benchmarking foundation models for resting-state functional magnetic resonance imaging time series in cognitive aging research

Foundation models trained on large neuroimaging datasets could help smaller studies investigate cognition from brain recordings. However, whether the foundation model-derived representations improve assessment of current cognition, prediction of follow-up cognition, or characterization of cognitive change remains unclear. We evaluated nine configurations from five model families that process regional resting-state functional magnetic resonance imaging time series, using 3,103 scans from 1,653 participants across two observational and five intervention aging cohorts. Primary frozen representations showed no consistent superiority over conventional functional connectivity for concurrent cognitive associations or diagnostic classification. Changing the readout improved selected concurrent cognitive associations without updating model weights, indicating that performance depended partly on how representations were extracted. Additional post-training and embedding alignment yielded gains in selected settings but did not consistently improve performance across outcomes. In the primary longitudinal analyses, imaging representations did not establish added value beyond baseline clinical measures. These findings show that readout choice influences concurrent cognitive associations, while the added value of these representations for longitudinal outcomes remains unestablished.

bioengineering↗

bioRxiv2026

PROST: An Open Toolbox, Harmonised Multi-Lab Dataset, and Meta-Analysis of Ankle-Foot Roll-Over Shape

The ankle-foot roll-over shape (ROS) is the sagittal-plane path of the centre of pressure (CoP) during the stance phase of walking, expressed in a shank-based coordinate system. It describes the effective rocker geometry that emerges from both the shape and the elastic deformation of the ankle-foot system during walking, and informs prosthetic and orthotic design. Previous studies characterised ROS in small samples with differing laboratory protocols, so they have not systematically assessed inter-individual variability or its relation to anthropometrics. We developed the open-source Public ROS Toolbox (PROST) for standardised ROS computation, and used it to harmonise marker trajectories, ground reaction forces and CoP data from four public gait datasets collected in independent laboratories. For each leg, we fitted a circular arc to the pooled ROS of all its stance phases. In a one-stage individual-participant data meta-analysis, linear mixed-effects models, with dataset as a fixed effect and participant as a random intercept, related the arc radius and the horizontal coordinate of the circle centre to anthropometrics, and, in the two self-selected-speed datasets, to walking speed. The harmonised dataset comprises 249 participants and 5,667 stance phases at walking speeds of 0.7-8.5 km/h. Circular arcs fitted the ROS closely (mean RMS radial residual 1.9 mm). The radius had a median of 410.3 mm (interquartile range, IQR, 237.6 mm), and the circle centre lay posterior to the ankle (median -20.6 mm, IQR 49.5 mm). Between-participant differences, quantified by the intraclass correlation coefficient (ICC), accounted for 42% of the variance in log radius (95% CI 25-57%) and 47% of the variance in the horizontal coordinate of the circle centre (95% CI 24-65%). Anthropometrics explained a negligible share of this variance (radius: pseudo-R2 -0.001, 95% CI -0.03 to 0.12), and height normalisation did not reduce radius variability (robust coefficient of variation 43% with and without normalisation). Faster self-selected walking was associated with a larger radius and a more posterior circle centre. To our knowledge, this study provides the first harmonised multi-lab ROS dataset. Together with the open-source toolbox, it is publicly available to support reproducible research in gait biomechanics, rehabilitation device design and clinical gait assessment. ROS geometry was participant-specific but was not predicted by age, sex, height or mass. A device ROS scaled from anthropometrics is therefore unlikely to match an individual's ROS, motivating studies of whether matching it, through device geometry and stiffness, improves gait mechanics.

bioengineering↗