bioRxiv Science⌕ Search

bioRxiv · 10.1101/2021.03.18.436028

HIV-1 requires capsid remodelling at the nuclear pore for nuclear entry and integration

Abstract

The capsid (CA) lattice of the HIV-1 core plays a key role during infection. From the moment the core is released into the cytoplasm, it interacts with a range of cellular factors that, ultimately, direct the pre-integration complex to the integration site. For integration to occur, the CA lattice must disassemble. Early uncoating or a failure to do so has detrimental effects on virus infectivity, indicating that an optimal stability of the viral core is crucial for infection. Here, we introduced cysteine residues into HIV-1 CA in order to induce disulphide bond formation and engineer hyper-stable mutants that are slower or unable to uncoat, and then followed their replication. From a panel of mutants, we identified three with increased capsid stability in cells and found that, whilst the M68C/E212C mutant had a 5-fold reduction in reverse transcription, two mutants, A14C/E45C and E180C, were able to reverse transcribe to approximately WT levels. Moreover, these mutants only had a 5-fold reduction in 2-LTR circle production, suggesting that not only could reverse transcription complete in hyper-stable cores, but that the nascent viral cDNA could enter the nuclear compartment. Furthermore, we observed significant levels of A14C/E45C mutant capsid in nuclear and chromatin-associated fractions implying that the hyper-stable cores themselves entered the nucleus. Immunofluorescence studies revealed that although the A14C/E45C mutant capsid reached the nuclear pore with the same kinetics as wild type capsid, it was then retained at the pore in association with Nup153. Crucially, infection with the hyper-stable mutants did not promote CPSF6 re-localisation to nuclear speckles, despite the mutant capsids being competent for CPSF6 binding. These observations suggest that hyper-stable cores are not able to uncoat, or remodel, enough to pass through or dissociate from the nuclear pore and integrate successfully. This, is turn, highlights the importance of capsid lattice flexibility for nuclear entry. In conclusion, we hypothesise that during a productive infection, a capsid remodelling step takes place at the nuclear pore that releases the core complex from Nup153, and relays it to CPSF6, which then localises it to chromatin ready for integration. AUTHOR SUMMARYThe mature viral core of human immunodeficiency virus (HIV) consists of a highly organised lattice formed by capsid molecules that encloses the viral RNA and viral enzymes. This lattice is crucial during the early stages of viral replication, as it has to break down - uncoat - at the right time and place in order for the viral DNA to integrate successfully. Lentiviruses, like HIV, can infect non-dividing cells and are able to access the host cell DNA by entering the nucleus through nuclear pores. Until recently, uncoating was thought to occur in the cytoplasm as the whole core was thought too large to pass through the nuclear pore. However, lately it has been suggested that uncoating might occur at the nuclear pore or even inside the nucleus and the site of uncoating is currently hotly debated. By investigating HIV mutants with an increased lattice stability, we have shown that lattice flexibility is crucial for nuclear entry. Provocatively, we observed hyper-stable mutant capsid in nuclear and chromatin-associated fractions suggesting that uncoating is not required for nuclear entry. Nonetheless, microscopy experiments suggested that these hyper-stable mutants were retained on the inner side of the nuclear pore, and were impaired for downstream events in the nucleus, leading to a severe infectivity defect. Therefore, we believe that an essential uncoating, or capsid lattice remodelling event normally takes place at the nuclear pore.

Source connections

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Guedan, A., Donaldson, C. D., Cosnefroy, O., Taylor, I. A., Bishop, K. N.. 2021-03-18. HIV-1 requires capsid remodelling at the nuclear pore for nuclear entry and integration. https://doi.org/10.1101/2021.03.18.436028

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related preprints

Reverse Transcription Loop-Mediated Isothermal Amplification Combined with Lateral Flow Assay (RT-LAMP-LFA) for Rapid Detection of the 2026 Bundibugyo Virus (BDBV) Outbreak Strain

Making accurate diagnosis is a critical first step in patient management and control for emerging and re-emerging disease outbreaks. Bundibugyo virus (BDBV) is a filovirus that causes Ebola disease, and the 2026 outbreak highlights the need for rapid diagnostic approaches that can be deployed in settings with limited laboratory infrastructure. Here, we developed a reverse transcription loop-mediated isothermal amplification-lateral flow assay (RT-LAMP-LFA) for rapid detection of the 2026 BDBV outbreak strain. LAMP primers were designed based on the genome sequence of the 2026 outbreak strain, and the conservation of the primer binding sites among all available 2026 outbreak genomes was confirmed in silico. LAMP primers were evaluated for analytical specificity and sensitivity using in vitro-transcribed RNA (ivtRNA) from BDBV and other filoviruses, as well as RNA derived from arboviruses and mammalian cells. Amplification products were detected using a Chromatography-Printed Array Strip (C-PAS) lateral flow platform. The newly designed primers specifically detected the presence of BDBV RNA without nonspecific amplification of the other viral or cellular RNA samples tested. Consistent amplification was observed down to 103 copies per reaction. In addition, BDBV viral RNA was successfully amplified, and the amplification products were detected using C-PAS, with the total workflow being completed within 25 min. These findings demonstrate the analytical specificity and sensitivity of the developed RT-LAMP-LFA assay and its compatibility with rapid visual lateral flow detection, supporting its potential application as a point-of-care approach for BDBV detection.

microbiology↗

Divergent methane production and microbial community responses to carbon enrichment in freshwater wetland sediments

Methane (CH4) accumulation in wetland sediments reflects interactions among organic matter, sediment chemistry, and microbial communities. We combined depth-resolved field characterization across four wetland habitats in northern Israel with complementary incubations to examine methane accumulation and responses to labile-carbon enrichment. Sediment cores were characterized using Rock-Eval analysis, porewater chemistry, oxygen profiling at three sites, and mcrA amplicon sequencing. High CH4 concentrations occurred under contrasting conditions: Ein Nimfit (EN) contained approximately 12% total organic carbon and reached 2.1 mM CH4, whereas Ein Afek site EA2 contained approximately 5% carbon and accumulated 0.7-1.7 mM CH4. Both showed sulfate depletion, but EN exhibited pronounced sulfide accumulation, whereas EA2 showed greater dissolved iron and nutrient enrichment. Their classified methanogenic assemblages also differed. EA1 remained methane poor despite increasing carbon content with depth, while EA3 combined low carbon content and CH4 accumulation with detectable methanogens and lower methanogenic diversity. In a 36-day bottle experiments using sediments from two of the four wetland habitats, sucrose-amended EA3 exhibited a transient maximum of 18.8 mmol collected CH4 kg-1 wet sediment during Days 22-29, whereas EN reached its highest collected amount during Days 29-36. Methane proportions increased before the large output increase in EA3 but remained comparatively stable and high in EN. Soluble chemical oxygen demand trajectories and microbial community changes also differed. These findings identify distinct biogeochemical settings supporting methane accumulation and demonstrate methanogenic potential in low-CH4 sediment, emphasizing the complementary information provided by field profiles, microbial characterization, and exploratory enrichment experiments.

microbiology↗

The absence of microbiome in germ-free mice exacerbates the pathogenicity of mouse-adapted SARS-CoV-2 MA10

Germ-free mice, which are devoid of microbiota, provide a powerful system to define the contribution of the microbiome to host responses during infection. Severe COVID-19 outcomes are associated with multiple comorbidities that are themselves characterized by microbiome dysbiosis; however, the causal role of the microbiota in SARS-CoV-2 pathogenesis remains poorly understood. Here, we use germ-free mouse models to evaluate the impact of the microbiome on disease severity following infection with mouse-adapted SARS-CoV-2 MA10. Comparison with conventionally housed mice revealed that the absence of the microbiome markedly exacerbates SARS-CoV-2-induced disease in both C57BL/6 and Swiss Webster backgrounds. Germ-free mice exhibited greater weight loss, impaired lung function, worsened pulmonary pathology, and pronounced alterations in circulating cytokine and chemokine profiles compared with conventional controls. These findings show that resident microbiota limit SARS-CoV-2 pathogenicity and establish germ-free COVID-19 models as a powerful platform to identify protective microbial taxa and microbiota-based interventions to reduce severe disease.

microbiology↗