bioRxiv Science⌕ Search
Home/Archive/bioRxiv

bioRxiv · 10.1101/2020.02.15.948976

Non-negative least squares computation for in vivo myelin mapping using simulated multi-echo spin-echo T2 decay data

Wiggermann, V.·Vavasour, I. M.·Kolind, S.·MacKay, A. L.·Helms, G.·Rauscher, A.
View original source ↗Export metadata ↓

Abstract

Multi-compartment T2-mapping has gained particular relevance for the study of myelin water in brain. As a facilitator of rapid saltatory axonal signal transmission, myelin is a cornerstone indicator of white matter development and function. Regularized non-negative least squares fitting of multi-echo T2 data has been widely employed for the computation of the myelin water fraction (MWF) and the obtained MWF maps have been histopathologically validated. MWF measurements depend upon the quality of the data acquisition, B1+-homogeneity and a range of fitting parameters. In this special issue article, we discuss the relevance of these factors for the accurate computation of multi-compartment T2 and MWF maps. We generated multi-echo spin-echo T2 decay curves following the approach of CarrPurcell-Meiboom-Gill for various myelin concentrations and myelin T2 scenarios by simulating the evolution of the magnetization vector between echoes based on the Bloch equations. We demonstrated that noise and imperfect refocusing flip angles yield systematic underestimations in MWF and intra-/extracellular water geometric mean (gm) T2. MWF estimates were more stable than myelin water gmT2 time across different settings of the T2 analysis. We observed that the lower limit of the T2 distribution grid should be slightly shorter than TE1. Both TE1 and the acquisition echo spacing also have to be sufficiently short to capture the rapidly decaying myelin water T2 signal. Among all parameters of interest, the estimated MWF and intra-/extracellular water gmT2 differed by approximately 0.13-4 percentage points and 3-4 ms, respectively, from the true values, with larger deviations observed in the presence of greater B1+-inhomogeneities and at lower signal-to-noise ratio. Tailoring acquisition strategies may allow to better characterize the T2 distribution, including the myelin water, in vivo.

Source connections

Explore related subjects

biophysicsPreprint

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Wiggermann, V., Vavasour, I. M., Kolind, S., MacKay, A. L., Helms, G., Rauscher, A.. 2020-02-17. Non-negative least squares computation for in vivo myelin mapping using simulated multi-echo spin-echo T2 decay data. https://doi.org/10.1101/2020.02.15.948976

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related preprints

bioRxiv2026

Autonomous Homeostatic Synthetic Cells via Self-Gating DNA Nanopores

Homeostasis is a fundamental hallmark of living organisms, arising from the complex interplay between biochemical reactions and regulatory feedback systems. Reconstituting such self-regulating behaviour in minimal synthetic cells enables continuous, persistent operation of biochemical reactions for extended amount of time. In this work, we demonstrate a minimal homeostatic synthetic cell capable of autonomous flux regulation using DNA nanotechnology and bottom-up synthetic biology. Our homeostatic architecture consists of Giant Unilamellar Vesicles (GUVs) equipped with gated DNA nanopores, encapsulated in vitro transcription (IVT) machinery, and an RNA degradation system. We achieve homeostasis under varying external chemical stimuli specifically varying concentrations of rNTPs by implementing a negative feedback loop between rNTP influx and RNA production. In our system, DNA nanopores facilitate the influx of rNTPs from the external environment, driving internal transcription. Crucially, the transcription process generates RNA "blockers" designed to bind and gate the DNA nanopores, thereby attenuating further rNTP influx. Our system is dynamic as encapsulated RNases slowly degrade the RNA blockers, allowing the pores to reopen as blocker concentration goes down. We first characterise the functionality and gating efficiency of the DNA nanopores using both pre-synthesised and in situ produced DNA and RNA blockers. We then demonstrate that rNTP flux through these pores is sufficient to drive IVT within the GUVs. Finally, by integrating these modules, we demonstrate robust homeostasis: the system maintains a steady-state level of RNA production for up to 16 hours. By harnessing the controllability of negative feedback loop, we demonstrate thresholding of the homeostasis level using single-stranded regulator DNA. This work establishes a versatile framework for engineering adaptive and self-sustaining responsive nanomaterials and synthetic cell chassis.

biophysics↗
bioRxiv2026

A Generic Numbering Scheme for TMEM16 Scramblases

The TMEM16 family of calcium-activated phospholipid scramblases (CaPLSs) and chloride channels (CaCCs) performs diverse physiological functions that include regulation of blood coagulation and apoptotic signaling, through a shared ten-transmembrane-helix (TM) architecture organized around a hydrophilic lipid-translocating groove. Mechanistic studies of TMEM16 family members have been hampered by the absence of a unified positional reference framework that would permit direct comparison of structurally equivalent residues across paralogs with different sequence numbering systems. Here we introduce a generic numbering scheme for TMEM16 scramblases (GNS-TMEM16), modeled on the Ballesteros & Weinstein system established for class A G protein-coupled receptors. A reference alignment (TMEM16-RA) was constructed from twelve human and mouse TMEM16 scramblases (TMEM16C/D/E/F/G/J) using structure-based ClustalW alignment of the ten TM helices. From this alignment, a TM-specific reference residue (TsRR) was identified for each helix by hierarchical application of three criteria: (1) 100% conservation in the core TMEM16-RA; (2) conservation in an augmented reference alignment (TMEM16-ARA) incorporating a group of phylogenetically more distant homologs composed of nhTMEM16, afTMEM16, TMEM16K, TMEM16A, and TMEM16B; and (3) structural and functional considerations, including helix-perturbing character, groove localization, conserved motif membership, and central TM position. The resulting ten TsRRs are Y1.50, W2.50, R3.50, E4.50, F5.50, P6.50, E7.50, D8.50, W9.50, and E10.50, and are illustrated in mTMEM16F. Each residue is assigned the identifier N.m(k), where N is the TM number, m is the position relative to the TsRR (for which m = 50), and k is the absolute sequence number. Loop residues receive dual identifiers referenced to the TsRRs of both flanking helices. Application of the GNS-TMEM16 is illustrated with the comparisons of the groove-opening measurements using pairwise distances between residues identified by their N.m indices to be corresponding across mTMEM16F, afTMEM16, and nhTMEM16. The results bring to light the advantages of corresponding residues identification in different TMEM16 proteins and show that the mammalian scramblase undergoes substantially larger separation at the extracellular groove entrance than either fungal homolog. Comparison of mutagenesis data guided by N.m correspondence shows at the conserved (E3.55,R6.26) salt-bridge locus, Ala substitution reduces activity more than 100-fold in nhTMEM16 but less than 2-fold in afTMEM16, illustrating that the GNS identifies structural equivalence of position without implying functional equivalence of the residue, which is a distinct advantage of GNS in providing mechanistic interpretation across paralogs. Also described is a protocol for extending the GNS-TMEM16 to uncharacterized protein sequences, including AlphaFold-predicted models, using structural superposition to mTMEM16F. Thus, the presented GNS-TMEM16 provides a stable positional reference for the integration and comparative analysis of structural, computational, and functional data across the TMEM16 family, utilizing a construction strategy applicable to yet other polytopic membrane protein families sharing a common transmembrane fold.

biophysics↗
bioRxiv2026

An agent-based 3D model of non-genetic adaptation in cancer tissues under electrical, mechanical, and hypoxic stress

Non-genetic adaptation enables cancer cells to alter their phenotype under stress without requiring new mutations. However, the mechanisms by which electrical, mechanical, and hypoxic cues combine to shape this process in 3D tissues remain poorly understood. This work presents an agent-based tumor model that integrates vascular oxygen supply, a globally imposed electric field, mechanically mediated crowding and compression cues, phenotype transitions, cell growth, mitosis, death, and inheritance of adaptive memory across division. The simulated tumors exhibit a three-stage trajectory consisting of necrosis onset, transient collapse of live mass, and partial regrowth accompanied by progressive accumulation of adapted cells. Continuous electrical stimulation produces a dose-dependent reduction in live mass while markedly increasing the adapted fraction, with comparatively limited changes in final necrotic burden. This response is strongly conditioned by mechanics and reshapes (and is reshaped by) adaptive capacity. Pulsed stimulation further shows that, in the model, electric field amplitude and temporal schedule jointly determine memory phenomena, phenotypic diversification, and growth recovery. These results show that coupling local oxygen availability, mechanical constraints, electrical forcing, and history-dependent phenotype transitions can generate distinct tissue-level patterns of phenotypic heterogeneity. Both stimulus magnitude and temporal protocol influenced the resulting population structure, suggesting that the history of physical stress may be an important determinant of adaptive dynamics in spatially organized tumor models.

biophysics↗