bioRxiv ScienceSearch

bioRxiv · 10.1101/125278

Formation Of Dominant Mode By Evolution In Biological Systems

Abstract

A reduction in high-dimensional phenotypic states to a few degrees of freedom is essential to understand biological systems. One possible origin of such a reduction (as recently discussed) is the steady growth of cells that constrains each components replication rate. Here, in contrast, our aim is to investigate consequences of evolutionary robustness, which is shown to cause a stronger dimensional reduction in possible phenotypic changes in response to a variety of environmental conditions. First, we examined global protein expression changes in Escherichia coli after various environmental perturbations. Remarkably, they were proportional across components, across different types of environmental conditions, while the proportion coefficient corresponded to the change in growth rate. Because such global proportionality is not generic to all systems under a condition of steady growth, a new conceptual framework is then needed. We hypothesized that such proportionality is a result of evolution. To test this hypothesis, we analyzed a cell model--with a huge number of components, that reproduces itself via a catalytic reaction network--and confirmed that common proportionality in the concentrations of all components is shaped through evolutionary processes to maximize cell growth (and therefore fitness) under a given environmental condition. Furthermore, we found that the changes in concentration across all components in response to environmental and evolutionary changes are constrained to the changes along a one-dimensional major axis within a huge-dimensional state space. On the basis of these observations, we propose a theory in which high-dimensional phenotypic changes after evolution are constrained to the points near a one-dimensional major axis that correlates with the growth rate, to achieve both evolutionary robustness and plasticity. By formulating this proposition in terms of dynamical systems, broad experimental and numerical results on phenotypic changes caused by evolution and adaptation are coherently explained.\n\nSummaryCells generally consist of thousands of components whose abundance levels change through adaptation and evolution. Accordingly, each steady cell state can be represented as a point in a high-dimensional space of component concentrations. In the context of equilibrium statistical thermodynamics, even though the state space is high-dimensional, macroscopic description only by a few degrees of freedom is possible for equilibrium systems; however, such characterization by a few degrees of freedom has not yet been achieved for cell systems. Given that they are not in equilibrium, we need some other constraint to be imposed. Here, by restricting our focus to a cellular state with steady growth that is achieved after evolution,we examine how the expression levels of its several components change under different environmental conditions. On the basis of analysis of protein expression levels in recent bacterial experiments as well as the results of simulations using a toy cell model consisting of thousands of components that are reproduced by catalytic reactions, we found that adaptation and evolutionary paths in high-dimensional state space are constrained to changes along a one-dimensional curve, representing a major axis for all the observed changes. Moreover, this one-dimensional structure emerges only after evolution and is not applicable to any system showing steady growth. This curve is determined by the growth rate of a cell, and thus it is possible to describe an evolved system by means of a growth rate function. All the observed results are consistent with the hypothesis that changes in high-dimensional states are nearly confined to the major axis in response to environmental, evolutionary, and stochastic perturbations. This description opens up the possibility to characterize a cell state as a macroscopic growth rate, as is the case for the thermodynamic potential. This approach can provide estimates of which phenotypic changes are theoretically more evolvable, as predicted simply from their observed environmental responses.

Source connections

Explore related subjects

Keep this discovery

BibTeXRIS

Furusawa, C., Kaneko, K.. 2017-04-07. Formation Of Dominant Mode By Evolution In Biological Systems. https://doi.org/10.1101/125278

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related preprints

Autonomous Homeostatic Synthetic Cells via Self-Gating DNA Nanopores

Homeostasis is a fundamental hallmark of living organisms, arising from the complex interplay between biochemical reactions and regulatory feedback systems. Reconstituting such self-regulating behaviour in minimal synthetic cells enables continuous, persistent operation of biochemical reactions for extended amount of time. In this work, we demonstrate a minimal homeostatic synthetic cell capable of autonomous flux regulation using DNA nanotechnology and bottom-up synthetic biology. Our homeostatic architecture consists of Giant Unilamellar Vesicles (GUVs) equipped with gated DNA nanopores, encapsulated in vitro transcription (IVT) machinery, and an RNA degradation system. We achieve homeostasis under varying external chemical stimuli specifically varying concentrations of rNTPs by implementing a negative feedback loop between rNTP influx and RNA production. In our system, DNA nanopores facilitate the influx of rNTPs from the external environment, driving internal transcription. Crucially, the transcription process generates RNA "blockers" designed to bind and gate the DNA nanopores, thereby attenuating further rNTP influx. Our system is dynamic as encapsulated RNases slowly degrade the RNA blockers, allowing the pores to reopen as blocker concentration goes down. We first characterise the functionality and gating efficiency of the DNA nanopores using both pre-synthesised and in situ produced DNA and RNA blockers. We then demonstrate that rNTP flux through these pores is sufficient to drive IVT within the GUVs. Finally, by integrating these modules, we demonstrate robust homeostasis: the system maintains a steady-state level of RNA production for up to 16 hours. By harnessing the controllability of negative feedback loop, we demonstrate thresholding of the homeostasis level using single-stranded regulator DNA. This work establishes a versatile framework for engineering adaptive and self-sustaining responsive nanomaterials and synthetic cell chassis.

biophysics

A Generic Numbering Scheme for TMEM16 Scramblases

The TMEM16 family of calcium-activated phospholipid scramblases (CaPLSs) and chloride channels (CaCCs) performs diverse physiological functions that include regulation of blood coagulation and apoptotic signaling, through a shared ten-transmembrane-helix (TM) architecture organized around a hydrophilic lipid-translocating groove. Mechanistic studies of TMEM16 family members have been hampered by the absence of a unified positional reference framework that would permit direct comparison of structurally equivalent residues across paralogs with different sequence numbering systems. Here we introduce a generic numbering scheme for TMEM16 scramblases (GNS-TMEM16), modeled on the Ballesteros & Weinstein system established for class A G protein-coupled receptors. A reference alignment (TMEM16-RA) was constructed from twelve human and mouse TMEM16 scramblases (TMEM16C/D/E/F/G/J) using structure-based ClustalW alignment of the ten TM helices. From this alignment, a TM-specific reference residue (TsRR) was identified for each helix by hierarchical application of three criteria: (1) 100% conservation in the core TMEM16-RA; (2) conservation in an augmented reference alignment (TMEM16-ARA) incorporating a group of phylogenetically more distant homologs composed of nhTMEM16, afTMEM16, TMEM16K, TMEM16A, and TMEM16B; and (3) structural and functional considerations, including helix-perturbing character, groove localization, conserved motif membership, and central TM position. The resulting ten TsRRs are Y1.50, W2.50, R3.50, E4.50, F5.50, P6.50, E7.50, D8.50, W9.50, and E10.50, and are illustrated in mTMEM16F. Each residue is assigned the identifier N.m(k), where N is the TM number, m is the position relative to the TsRR (for which m = 50), and k is the absolute sequence number. Loop residues receive dual identifiers referenced to the TsRRs of both flanking helices. Application of the GNS-TMEM16 is illustrated with the comparisons of the groove-opening measurements using pairwise distances between residues identified by their N.m indices to be corresponding across mTMEM16F, afTMEM16, and nhTMEM16. The results bring to light the advantages of corresponding residues identification in different TMEM16 proteins and show that the mammalian scramblase undergoes substantially larger separation at the extracellular groove entrance than either fungal homolog. Comparison of mutagenesis data guided by N.m correspondence shows at the conserved (E3.55,R6.26) salt-bridge locus, Ala substitution reduces activity more than 100-fold in nhTMEM16 but less than 2-fold in afTMEM16, illustrating that the GNS identifies structural equivalence of position without implying functional equivalence of the residue, which is a distinct advantage of GNS in providing mechanistic interpretation across paralogs. Also described is a protocol for extending the GNS-TMEM16 to uncharacterized protein sequences, including AlphaFold-predicted models, using structural superposition to mTMEM16F. Thus, the presented GNS-TMEM16 provides a stable positional reference for the integration and comparative analysis of structural, computational, and functional data across the TMEM16 family, utilizing a construction strategy applicable to yet other polytopic membrane protein families sharing a common transmembrane fold.

biophysics

An agent-based 3D model of non-genetic adaptation in cancer tissues under electrical, mechanical, and hypoxic stress

Non-genetic adaptation enables cancer cells to alter their phenotype under stress without requiring new mutations. However, the mechanisms by which electrical, mechanical, and hypoxic cues combine to shape this process in 3D tissues remain poorly understood. This work presents an agent-based tumor model that integrates vascular oxygen supply, a globally imposed electric field, mechanically mediated crowding and compression cues, phenotype transitions, cell growth, mitosis, death, and inheritance of adaptive memory across division. The simulated tumors exhibit a three-stage trajectory consisting of necrosis onset, transient collapse of live mass, and partial regrowth accompanied by progressive accumulation of adapted cells. Continuous electrical stimulation produces a dose-dependent reduction in live mass while markedly increasing the adapted fraction, with comparatively limited changes in final necrotic burden. This response is strongly conditioned by mechanics and reshapes (and is reshaped by) adaptive capacity. Pulsed stimulation further shows that, in the model, electric field amplitude and temporal schedule jointly determine memory phenomena, phenotypic diversification, and growth recovery. These results show that coupling local oxygen availability, mechanical constraints, electrical forcing, and history-dependent phenotype transitions can generate distinct tissue-level patterns of phenotypic heterogeneity. Both stimulus magnitude and temporal protocol influenced the resulting population structure, suggesting that the history of physical stress may be an important determinant of adaptive dynamics in spatially organized tumor models.

biophysics