bioRxiv Science⌕ Search

Biology subjects

Tsukanov, R.

Publications and source records attributed to Tsukanov, R..

11 recordsLinked to original sources

Nanobodies equipped with HaloTag variants enable rapid and straightforward one-step immunofluorescence lifetime multiplexing

Multiplexed fluorescence imaging is limited by spectral overlap, whereas fluorescence lifetime provides an orthogonal encoding dimension. We replace genetically fused HaloTags with recombinant nanobody-HaloTag constructs applied as immunofluorescence reagents and determine a lifetime palette. Integrating lifetime and spectral encoding enables up to eight targets in a single acquisition and supports multiplexed imaging in cells and tissue using a simple OneStep labeling strategy compatible with fluorescent proteins, STED nanoscopy, and any standard laboratory antibody.

cell biology↗

High-Performance, Computer-Controlled Bipedal DNA Motor

Achieving precise, repeatable motion at the molecular scale remains a central challenge in the development of synthetic molecular machines. Here we report a high-fidelity, fast bipedal DNA walker that moves bidirectionally along a DNA origami track using a fuel-before-antifuel operational scheme that suppresses trap states typical of externally powered DNA motors. Automated, computer-controlled microfluidics enables programmable trajectory execution with >98% yield per step and sustained bidirectional walking over distances of up to 360 nm, as monitored by single-molecule FRET. Kinetic analysis reveals rapid leg lifting but slower leg placement due to inhibitory fuel-antifuel heterocomplex formation, identifying a mechanistic bottleneck that can be mitigated through optimization of fuel, antifuel and foothold design. The resulting motor operates with efficiencies of up to 4 orders of magnitude higher than previous externally controlled DNA walkers, establishing a robust framework for deterministic, programmable molecular transport.

biophysics↗

Self-blinking dye restores efficient use of nanobodies in single-molecule localization microscopy.

Direct stochastic optical reconstruction microscopy (dSTORM) relies on controlled fluorophore blinking to achieve nanometer-scale resolution, yet the fields benchmark dye, Alexa Fluor 647, underperforms when conjugated to nanobodies, limiting the practical use of minimal-linkage labeling strategies. Here, we show that the self-blinking dye JF635b overcomes this limitation by maintaining robust, photostable blinking upon conjugation to nanobodies under buffer-independent conditions. This enables reliable single-molecule localization microscopy without the need for complex switching buffers. Using JF635b-labeled nanobodies, we demonstrate consistent performance across multiple imaging modalities, including wide-field dSTORM, fluorescence lifetime SMLM, and MINFLUX nanoscopy, achieving localization precisions from [~]15 nm down to the sub-nanometer regime. In addition, JF635b supports long-term sample preservation and efficient blinking even in pure water, enabling minimally perturbative imaging conditions. Together, these results establish self-blinking dSTORM as a robust and accessible platform for quantitative nanoscopy across experimental contexts.

biophysics↗

A versatile microfluidics platform for enhanced multi-target super-resolution microscopy

DNA-based Point Accumulation for Imaging in Nanoscale Topography (DNA-PAINT) is a powerful variant of single-molecule localization microscopy (SMLM) that overcomes the limitations of photobleaching, offers flexible fluorophore selection, and enables fine control of imaging parameters through tunable on- and off-binding kinetics. Its most distinctive feature is the capacity for multiplexing, which is achieved through a process known as Exchange-PAINT. This technique involves assigning orthogonal DNA strands to different targets within a sample and then sequentially adding and removing complementary imager strands that are specific to only one target at a time. However, manual Exchange-PAINT workflows are often inefficient, prone to drift and variability, and lack reproducibility. Here, we introduce a custom compressed-air-driven microfluidics system specifically designed for multiplexed SMLM. Featuring a stackable and modular design that is, in principle, not limited by the number of channels, the system ensures robust, reproducible, and material-efficient buffer exchange with minimal dead volume. It operates in both manual and automated modes and can be readily adapted to a wide range of commercial and custom microscopes, including wide-field, confocal, STED, and MINFLUX platforms. We demonstrate robust 5-plex Exchange-PAINT imaging in cancerous U2OS cells and, importantly, we establish multiplexed nanoscale imaging in fragile primary cardiomyocytes. These applications highlight the unique power of our platform to extend super-resolution multiplexing into physiologically relevant systems, thereby opening new avenues for biomedical research.

biophysics↗

Three-dimensional multi-target super-resolution microscopy of cells using Metal-Induced Energy Transfer and DNA-PAINT

AbsrtactAchieving nanometer precision in 3D remains a major challenge in super-resolution microscopy. DNA-PAINT offers excellent lateral resolution and versatile multiplexing, but its axial localization precision is typically 3-5 times poorer, limiting quantitative 3D imaging. Here, we present MIET-PAINT, which combines DNA-PAINT with Metal-Induced Energy Transfer (MIET) to overcome this limitation. We implement MIET-PAINT on both wide-field fluorescence lifetime and confocal TCSPC platforms. Wide-field MIET-PAINT enables robust, multiplexed imaging of focal adhesion proteins and actin in fixed cells. To address the lateral resolution limits of lifetime cameras, we further developed confocal MIET-PAINT, which leverages optical background rejection and high-efficiency SPAD detection. This modality achieves [~]12 nm lateral precision and resolves the 3D architecture of microtubules, vimentin, and actin with high fidelity. MIET-PAINT thus unites nanometer-scale axial accuracy with the multiplexing versatility of DNA-PAINT, establishing a powerful tool for quantitative 3D cell biology.

biophysics↗

NanoPlex: a universal strategy for fluorescence microscopy multiplexing using nanobodies with erasable signals

Fluorescence microscopy has long been a transformative technique in biological sciences. Nevertheless, most implementations are limited to a few targets, revealed using primary antibodies (1.Abs) and fluorescently conjugated secondary antibodies. Super-resolution techniques such as Exchange-PAINT and, more recently, SUM-PAINT have increased multiplexing capabilities, but they require specialized equipment, software, and knowledge. To enable multiplexing for any imaging technique in any laboratory, we developed NanoPlex, a streamlined method based on conventional 1.Abs revealed by engineered secondary nanobodies (2.Nbs) that allow to selectively erase the fluorescence signals. We developed three complementary signal removal strategies: OptoPlex (light-induced), EnzyPlex (enzymatic), and ChemiPlex (chemical). We showcase NanoPlex reaching 21 targets for 3D confocal analyses and 5-8 targets for dSTORM and STED super-resolution imaging. NanoPlex has the potential to revolutionize multi-target fluorescent imaging methods, potentially redefining the multiplexing capabilities of antibody-based assays.

neuroscience↗

Nanoscale architecture and dynamics of CaV1.3 channel clusters in cardiac myocytes revealed by single channel nanoscopy

The clustering of L-type calcium channels for functional regulation of intracellular calcium signaling remains poorly understood. Here we applied super-resolution imaging to study CaV1.3 channel clusters in human iPSC-derived atrial cardiomyocytes (hiPSC-aCM) to analyze subcellular localization, dimensions, architecture, and dynamics, which were largely unexplored previously. STimulated Emission Depletion (STED) imaging characterized the localization and structure of CaV1.3 channel clusters in living cardiomyocytes. DNA Points Accumulation for Imaging in Nanoscale Topography (DNA-PAINT) achieved true molecular resolution, revealing an irregular channel distribution with substantial spacing. Single Particle Tracking (SPT) showed that channels co-diffuse in confined and stationary membrane nanodomains. The cytosolic C-terminal tail of CaV1.3 by itself was found sufficient for cluster formation. In conclusion, our LTCC clustering studies demonstrate that CaV1.3 channel clusters consist of mobile individual channels inside defined membrane nanodomains, in contrast to previous models of dense channel packing.

cell biology↗

A versatile synaptotagmin-1 nanobody provides perturbation-free live synaptic imaging and low linkage-error in super-resolution microscopy

Imaging of living synapses has relied for over two decades on the overexpression of synaptic proteins fused to fluorescent reporters. This strategy changes the stoichiometry of synaptic components and ultimately affects synapse physiology. To overcome these limitations, here we introduce a nanobody that binds the calcium sensor synaptotagmin-1 (NbSyt1). This nanobody functions in living neurons as an intrabody (iNbSyt1) and is minimally invasive, leaving synaptic transmission almost unaffected, as demonstrated by the crystal structure of the NbSyt1 bound to synaptotagmin-1 and by our physiological data. Its single-domain nature enables the generation of protein-based fluorescent reporters, as we showcase here by measuring spatially-localized presynaptic Ca2+ with an NbSyt1-jGCaMP8 chimera. Moreover, its small size makes the NbSyt1 ideal for various super-resolution imaging methods. Overall, NbSyt1 is a versatile binder that will enable imaging in cellular and molecular neuroscience at a higher precision than possible in the past, over multiple spatiotemporal scales.

neuroscience↗

Isotropic Three-Dimensional Dual-Color Super-Resolution Microscopy with Metal-Induced Energy Transfer

Over the last two decades, super-resolution microscopy has seen a tremendous development in speed and resolution, but for most of its methods, there exists a remarkable gap between lateral and axial resolution. Similar to conventional optical microscopy, the axial resolution is by a factor three to five worse than the lateral resolution. One recently developed method to close this gap is metal-induced energy transfer (MIET) imaging which achieves an axial resolution down to nanometers. It exploits the distance dependent quenching of fluorescence when a fluorescent molecule is brought close to a metal surface. In the present manuscript, we combine the extreme axial resolution of MIET imaging with the extraordinary lateral resolution of single-molecule localization microscopy, in particular with direct stochastic optical reconstruction microscopy (dSTORM). This combination allows us to achieve isotropic three-dimensional super-resolution imaging of sub-cellular structures. Moreover, we employed spectral demixing for implementing dualcolor MIET-dSTORM that allows us to image and co-localize, in three dimensions, two different cellular structures simultaneously.

biophysics↗

Confocal Laser-Scanning Fluorescence-Lifetime Single-Molecule Localisation Microscopy

Fluorescence lifetime imaging microscopy (FLIM) is an important technique that adds another dimension to the intensity and colour information of conventional microscopy. In particular, it allows for multiplexing fluorescent labels that have otherwise similar spectral properties. Currently, the only super-resolution technique that is capable of recording super-resolved images with lifetime information is STimulated Emission Depletion (STED) microscopy. In contrast, all Single-Molecule Localisation Microscopy (SMLM) techniques that employ wide-field cameras completely lack the lifetime dimension. Here, we combine Fluorescence-Lifetime Confocal Laser-Scanning Microscopy (FL-CLSM) with SMLM for realising single-molecule localisation-based fluorescence-lifetime super-resolution imaging (FL-SMLM). Besides yielding images with a spatial resolution much beyond the diffraction limit, it determines the fluorescence lifetime of all localised molecules. We validate our technique by applying it to direct STochastic Optical Reconstruction Microscopy (dSTORM) and Points Accumulation for Imaging in Nanoscale Topography (PAINT) imaging of fixed cells, and we demonstrate its multiplexing capability on samples with two different labels that differ only by fluorescence lifetime but not by their spectral properties.

biophysics↗

Nanobody Detection of Standard Fluorescent Proteins Enables Multi-Target DNA-PAINT with High Resolution and Minimal Displacement Errors

DNA-PAINT is a rapidly developing fluorescence super-resolution technique which allows for reaching spatial resolutions below 10 nm. It also enables the imaging of multiple targets in the same sample. However, using DNA-PAINT to observe cellular structures at such resolution remains challenging. Antibodies, which are commonly used for this purpose, lead to a displacement between the target protein and the reporting fluorophore of 20-25 nm, thus limiting the resolving power. Here, we used nanobodies to minimize this linkage error to ~4 nm. We demonstrate multiplexed imaging by using 3 nanobodies, each able to bind to a different family of fluorescent proteins. We couple the nanobodies with single DNA strands via a straight forward and stoichiometric chemical conjugation. Additionally, we built a versatile computer-controlled microfluidic setup to enable multiplexed DNA-PAINT in an efficient manner. As a proof of principle, we labeled and imaged proteins on mitochondria, the Golgi apparatus, and chromatin. We obtained super-resolved images of the 3 targets with 20 nm resolution, and within only 35 minutes acquisition time.

cell biology↗