bioRxiv Science⌕ Search

Biology subjects

Tsugawa, S.

Publications and source records attributed to Tsugawa, S..

11 recordsLinked to original sources

Apical3DTip: Elliptic Cross-section-based Reconstruction for the Embryo Initial Cell of Arabidopsis

BackgroundCell geometry plays a central role in determining division orientation and body axis formation during early embryogenesis in Arabidopsis thaliana. However, quantitative analysis of dynamic three-dimensional (3D) morphology remains challenging because live-imaging studies often rely on two-dimensional (2D) projections, while existing 3D reconstruction approaches, including mesh-based methods, often lose the original orientation information relative to the ovule and require labor-intensive mesh correction. In addition, embryo positional fluctuation caused by floating in liquid medium and continuous growth makes it difficult to analyze temporal morphological changes within a common coordinate system. ResultsWe developed a robust framework for quantitative 3D and four-dimensional (4D; 3D + time) analysis of embryo initial cell (apical cell) morphology. The method first establishes a standardized 3D coordinate system by normalizing cell orientation based on the bottom plane and the optical axis of the observation. Cell morphology is then reconstructed through ellipse-based approximation of serial cross-sections extracted from stacked imaging data, enabling accurate geometric characterization without the need for complex surface mesh reconstruction. To evaluate shape anisotropy, we quantified the apical cell shape in 3D. The framework further supports the characterization of volumetric features of subsequent division, providing a basis for quantifying 3D embryogenesis. ConclusionOur framework provides a simple and noise-reduced approach for quantitative analysis of living cell morphology in 3D. We named the integrated method of combining coordinate normalization with elliptical cross-section-based reconstruction Apical3DTip. This method enables consistent comparison of cell shapes without extensive manual corrections. The method overcomes key limitations of 2D projection-based and mesh-dependent analyses and offers a practical platform for quantifying cell shape and daughter cell shapes in 3D. More broadly, it provides a quantitative foundation for exploring the relationship between cell geometry, morphodynamics, and developmental patterning in living plant embryos.

plant biology↗

Deformation Gradient Tensor Model of Roll-Spiral Transformation for Protein Assembly Refractile Body

Spiral geometries commonly occur in natural and engineered systems and are fundamentally described by curvature and torsion. In deformation-dominated systems, these variables evolve dynamically, requiring a continuum mechanical framework to link geometry and deformation. This study focused on refractile bodies (R-bodies), protein supramolecular assemblies that undergo reversible roll-spiral transformations in response to stimuli such as pH changes. Although multiple R-body types with distinct morphologies and unrolling behaviours were experimentally identified, their deformation mechanisms lack quantitative theoretical descriptions. We proposed a deformation-gradient-tensor-based continuum model incorporating geometrical mapping from the rolled to spiral state within a unified framework. The model successfully reconstructed macroscopic deformation behaviours of types 51, 7, and Pa R-bodies by capturing differences in unrolling behaviours, tapered geometry, and spatio-temporal evolution. The analysis revealed that deformation proceeds through a coupled process in which the curvature decreases via straightening, while the torsion increases by twisting. Importantly, the framework connected the macroscopic morphology with microscopic lattice deformation, enabling quantitative inference of lattice intervals and angles. The proposed comprehensive geometric model of the R-body roll-spiral transformation offers a general mathematical foundation for understanding deformation-driven spiral transformations in soft matter systems.

biophysics↗

Ca2+ oscillations promote microtubule-band turnover and support tip growth in Arabidopsis zygotes

The zygote is the origin of development, and in most angiosperms, it divides asymmetrically to establish the apical-basal axis. In Arabidopsis thaliana, the zygote undergoes tip growth-like polar elongation, using a subapical transverse microtubule band (MT band). Because canonical tip-growing cells rely on longitudinal actin filaments (F-actin), it remains unclear whether and how the zygote employs conserved tip-growth mechanisms. Here, using quantitative live-cell imaging, pharmacological perturbations, and mechanical simulations, we found that oscillatory Ca{superscript 2} waves, a hallmark of tip growth, are coupled to zygote elongation through a bidirectional feedback loop, as in other tip-growing cells. However, Ca{superscript 2} waves were dispensable for overall F-actin alignment but promoted MT band turnover. Our study provides a model showing that the zygote uses a conserved tip-growth module, in which Ca{superscript 2} oscillations and cell elongation reinforce each other, but redirects the target cytoskeleton to the MT band, enabling zygote-specific tip growth for axis formation.

plant biology↗

Two-step polar plastid migration via F-actin and microtubules ensures unequal inheritance during asymmetric division of Arabidopsis zygote

The zygote is the origin of development, and in most angiosperms, it divides asymmetrically to establish the apical-basal axis. In Arabidopsis thaliana, various organelles in the zygote undergo polar migration along actin filaments (F-actin), resulting in unequal inheritance, but the behavior of plastids, essential precursors of chloroplasts, has remained unclear. Here, using quantitative live-cell imaging, we reveal that plastids undergo two-step polar migration: they first move apically together with the nucleus along F-actin, and when nuclear migration slows, they switch to microtubule (MT)-dependent migration to move further apically. This results in unequal plastid inheritance by the apical cell. Although these plastids are amyloplasts containing starch granules, starch is dispensable for migration, unlike the gravity response. Instead, a fertilization-activated MAP kinase pathway is required for polar plastid migration. Our results demonstrate that the zygote possesses a spatiotemporal regulatory mechanism that ensures unequal plastid inheritance at the onset of plant ontogeny.

plant biology↗

Pleasure in groove is associated with neuromelanin levels in the substantia nigra of younger healthy individuals: A neuromelanin-sensitive MRI study

The pleasurable urge to move in response to music is called groove. Prior research has suggested a potential link between groove and dopamine function. However, no studies to date have directly investigated the relationship between the two. Here, we aimed to assess individual dopamine function in the substantia nigra of healthy individuals using neuromelanin-sensitive magnetic resonance imaging (NM-MRI), a non-invasive method associated with dopamine function, and to investigate the relationship between the individual dopamine proxy index and sensitivity to the groove experience. In this study, 15 younger (< 48 years) and 16 older ([greater double equals]48 years) healthy individuals participated. Participants listened to ten musical excerpts and rated the groove experience based on "pleasure" and "wanting to move." To assess whether the groove experience is related to NM levels, type of musical excerpts, and sex, we analyzed with linear mixed-effects regression models. The results showed that higher NM levels (p = 0.032) and male sex (p = 0.034) were associated with higher pleasure ratings in the younger group. For the "urge to move" ratings, type of musical excerpts was associated with ratings in both groups (ps < 0.001), where high-groove music (Janata et al., 2012) receiving higher ratings. Taken together, these results suggest that the "pleasure" aspect of the groove experience in younger individuals was related to dopamine levels in the substantia nigra, but may not be associated with the "urge to move." Thus, pleasure and the urge to move are likely to involve distinct dopaminergic pathways and mechanisms, warranting further investigation.

neuroscience↗

Agent-Based Simulation of Cortical Microtubule Band Movement in the Arabidopsis Zygote

Arabidopsis thaliana zygotes form a circumferential cortical microtubule (CMT) band that moves upward along the longitudinal axis of the cylindrical cell; however, how and why this CMT band moves remain unknown. Based on several recently proposed descriptive feedback mechanisms of CMT reorientation, we hypothesized that a directional cue (DC) changes CMT orientation. We constructed an agent-based simulation model with a DC to observe what happens during CMT formation using different parameters. We determined that the output CMT band can become larger than the input DC zone and identified two types of self-organization processes depending on the parameters used. Furthermore, using well-defined parameters that form a static CMT band, we artificially changed the position of the input DC zone, revealing that CMT band movement requires a DC to move at an appropriate speed.

plant biology↗

Temporal changes in surface tension guide the accurate asymmetric division of Arabidopsis zygotes

In most plants, the zygote divides asymmetrically to define the body axis. In Arabidopsis thaliana, the zygote undergoes polar elongation maintaining a transverse band of cortical microtubules (MTs), and divides asymmetrically forming another MT band, preprophase band (PPB). How the MT band is maintained at the actively growing cell tip and whether it contributes to PPB formation remain elusive. By combining live-cell imaging and mechanical simulation, we show that zygote elongation induces a temporal change (large material derivative) in surface tension at the growing tip to maintain the MT band, which in turn supports polar elongation. The MT band then guides PPB to determine the cell division site. Therefore, autonomous mechanical feedback between cell elongation and MT organization ensures the zygote division asymmetry.

plant biology↗

A viscoelastic-plastic deformation model of hemisphere-like tip growth in Arabidopsis zygotes

Plant zygote cells exhibit tip growth, producing a hemisphere-like tip. To understand how this hemisphere-like tip shape is formed, we revisited a viscoelastic-plastic deformation model that enabled us to simultaneously evaluate the shape, stress, and strain of Arabidopsis (Arabidopsis thaliana) zygote cells undergoing tip growth. Altering the spatial distribution of cell wall extensibility revealed that cosine-type distribution and growth in a normal direction to the surface creates a stable hemisphere-like tip shape. Assuming these as constraints for cell elongation, we determined the best-fitting parameters for turgor pressure and wall extensibility to computationally reconstruct an elongating zygote that retained its hemisphere-like shape using only cell contour data, leading to formulation of non-dimensional growth parameters. Our computational results demonstrate the different morphologies in elongating zygotes through effective non-dimensional parameters.

plant biology↗

Pulvinar Slits: Cellulose-deficient and De-esterified Homogalacturonan-rich Structures in a Legume Motor Cell

The cortical motor cells (CMCs) in a legume pulvinus execute the reversible deformation in leaf movement that is driven by changes in turgor pressure. In contrast to the underlying osmotic regulation proper, the cell wall structure of CMCs that contributes to the movement has yet to be characterized in detail. Here, we report that the cell wall of CMCs has circumferential slits with low levels of cellulose deposition. This structure is unique and distinct from that of any other primary cell walls reported so far; thus, we named them "pulvinar slits." Notably, we predominantly detected de-methyl-esterified homogalacturonan inside pulvinar slits, with a low deposition of highly methyl-esterified homogalacturonan, as with cellulose. In addition, Fourier-transform infrared spectroscopy analysis indicated that the cell wall composition of pulvini is different from that of other axial organs, such as petioles or stems. Moreover, monosaccharide analysis showed that pulvini are pectin-rich organs like developing stems and that the amount of galacturonic acid in pulvini is greater than in developing stems. Computer modeling suggested that pulvinar slits facilitate anisotropic extension in the direction perpendicular to the slits in the presence of turgor pressure. When tissue slices of CMCs were transferred to different extracellular osmotic conditions, pulvinar slits altered their opening width, indicating their deformability. In this study, we thus characterized a distinctive cell wall structure of CMCs, adding new knowledge to repetitive and reversible organ deformation as well as the structural diversity and function of the plant cell wall.

plant biology↗

Timing of organ initiation is crucial for robust organ size

AbstractOrgans precisely regulate their size and shape to ensure proper function1-6. The contribution of organ initiation timing to final organ size and shape is often masked by compensatory adjustments to growth later in development7-9. Here we show that DEVELOPMENT RELATED MYB-LIKE1 (DRMY1) is required for both proper organ initiation timing and growth leading to robust sepal size in Arabidopsis. Within each drmy1 flower, the initiation of some sepals is variably delayed. Late-initiating sepals in drmy1 mutants remain smaller throughout development resulting in variability in sepal size. DRMY1 focuses the spatiotemporal signaling patterns of the plant hormones auxin and cytokinin, which jointly control the timing of sepal initiation. Contrary to expectation, our findings demonstrate that timing of organ initiation contributes to robust organ size throughout development.

plant biology↗

Cells From The Same Lineage Switch From Reduction To Enhancement Of Size Variability In Arabidopsis Sepals

Organs form with remarkably consistent sizes and shapes during development, whereas a high variability in size and growth is observed at cell level. Given this contrast, it is unclear how such consistency at organ scale can emerge from cellular behavior. We examine the growth of cell lineages, or groups of cells that are the progeny of a single mother cell. At early stages of the lineage, we find that initially smaller lineages grow faster than the larger ones reducing variability in lineage size, a phenomenon we refer to as size uniformization. In contrast at later stages of the lineage, size variability is enhanced when initially larger cell lineages grow faster than the smaller ones. Our results imply that the cell lineage changes its growth pattern at a tipping point. Finally, we found that the growth heterogeneity of individual cells within a lineage is correlated with fast growth of the lineage. Consequently, fast growing lineages show greater cell growth heterogeneity, leading to uniformization in lineage size. Thus, cellular variability in growth contributes toward decreasing variability of cell lineages throughout the sepal.

developmental biology↗