Biology subjects

Troman, C.

Publications and source records attributed to Troman, C..

4 recordsLinked to original sources

bioRxiv2025

EnviroAmpDesigner, a tool for designing high specificity multiplex PCR primer panels for detecting and subtyping a target organism in environmental surveillance samples

BackgroundAmplicon sequencing is a popular method for understanding the diversity of bacterial communities in environmental or similar samples as exemplified by 16S rRNA sequencing. This approach has been extended into multiplex amplicon sequencing in which multiple targets are amplified in the same PCR reaction such as virus sequencing using tiled amplicons. Multiple tools exist to design PCR primers, and some support design of multiplex panels. However, despite increasing interest in the use of environmental or wastewater sampling for detecting and typing specific antimicrobial resistant (AMR) bacteria such as typhoid or cholera agents, we were unable to find a tool for designing a multiplex PCR panel for environmental samples that not only focused on detection of a specific organism, but also on amplifying lineage-specific or AMR-associated alleles of the target organism while minimising amplification of off-target genomes present in the sample. We found that existing tools either depend on the target organism being very distinct from the rest of the organisms in the sample, or focus on detection rather than genotyping of the organism of interest. We have developed EnviroAmpDesigner (v0.1.3, DOI: 10.5281/zenodo.14967337) to fill this gap, which we used to design a multiplex amplicon panel for detection, genotyping and AMR profiling of the typhoidal pathogens Salmonella enterica serovars Typhi and Paratyphi A. EnviroAmpDesigner can design amplicons for both short and long-read sequencing. The software first identifies single nucleotide polymorsphisms (SNPs) that distinguish individual genotypes of the target pathogen (in our case, S. Typhi). It then identifies SNPs that distinguish the target organism from others. Finally, the software designs primers that simultaneously target genotyping SNPs and have at least one primer with a 3 end at each SNP that distinguishes the target organism. The purpose of the latter condition is to increase the specificity of the primers, to minimise amplification of homologous sequences in non-target organisms. While our use case focuses on S. Typhi and Paratyphi A, the tool is organism agnostic and should work for any haploid organism. The tool is freely available via Bioconda and GitHub (https://github.com/AntonS-bio/EnviroAmpDesigner). Impact statementWe have developed EnviroAmpDesigner (v 0.1.3) software to design a multiplexed panel of long-read amplicons for detection and lineage typing of bacteria in environmental samples. We apply this tool to Salmonella Typhi and Paratyphi A, the bacterial agents of typhoid fever, but the tool is organism agnostic. The tool is computationally efficient and can be used on mid-range laptop. It has potential to support more widespread deployment of sequencing-based surveillance for bacterial pathogens in environmental and wastewater samples. Data SummaryFor the purposes of designing primers for S. Typhi and Paratyphi A we used 13,134 samples from the Global Typhoid Genomics Consortium data (target organisms) (1) and 1,810 publicly available Enterobacterales genomes from NCBIs RefSeq database (representing off-target related organisms) (2). To validate the primers, we applied an amplicon sequencing protocol (3) to DNA extracted from two S. Typhi isolates (NCBI accessions SRR5949979 and SRR7165748) provided by Satheesh Nair (UKHSA) (4), and a pooled DNA sample of American Type Culture Collection (ATCC) isolates S. Paratyphi A (ATCC 9150D), S. Paratyphi B (ATCC-BAA-1250D), S. Paratyphi C (ATCC-BAA-1715D), Aeromonas hydrophila (ATCC-7965D), Klebsiella pneumoniae (ATCC-BAA-1706D), and Citrobacter freundii (ATCC-8090D) chosen for their close relationship to S. Typhi. The resulting amplicon sequence data was deposited in European Nucleotide Archive (project accession: PRJEB81565).

bioinformatics↗

bioRxiv2025

AmpliconTyper tool for analysing ONT multiplex PCR data from environmental and other mixed sources

Amplicon sequencing is a popular method for understanding the diversity of bacterial communities in mixed samples as exemplified by 16S rRNA metagenome sequencing. This approach has been extended into multiplex amplicon sequencing in which multiple targets are amplified in the same polymerase chain reaction (PCR). Multiple tools exist to process the sequencing data produced via the short-read Illumina platform, but there are fewer options for long-read Oxford Nanopore Technologies (ONT) sequencing, or for processing data from environmental surveillance or other sources with many different organisms. We have developed AmpliconTyper (v0.1.28, DOI: 10.5281/zenodo.14621928) for analysing multiplex amplicon sequencing data from environmental (e.g. wastewater) or similarly contaminated samples, generated using ONT devices. The software tool uses machine learning to classify sequencing reads into target and non-target organisms with very high specificity and sensitivity. The user can train models using public and/or user-generated data, which can subsequently be applied to analyse new data. The tool can also generate amplicon consensus sequences, as well as identify single nucleotide polymorphisms (SNPs) and report their genotype implications, such as association with lineages or antimicrobial resistance (AMR). The tool is freely available via Bioconda and GitHub (https://github.com/AntonS-bio/AmpliconTyper). AmpliconTyper allows robust identification of target organism reads in ONT sequenced environmental samples, and can identify user-specified lineage or AMR markers. Impact statementAmpliconTyper (v0.1.28) is a software package that enables users to analyse amplicon sequences generated by targeted amplification followed by ONT sequencing, for environmental or other similarly contaminated samples. The analysis includes mapping of reads to target amplicon sequences, classification of each sequenced read as either originating from a target or non-target organism, followed by identification of user-specified SNPs and generation of an interactive report summarising the findings. The strength of AmpliconTyper lies in its ability to train a machine learning model using public data to create sequencing read classification models tailored to a users application. AmpliconTyper is designed specifically to work with extremely noisy data that includes a large share of off-target amplification reads such as those encountered in environmental surveillance applications. Data SummaryFor the purpose of designing and testing AmpliconTyper we have used two datasets. The first consisted of 69 Salmonella enterica serovar. Typhi (S. Typhi) and 10,303 other Enterobacteriaceae WGS ONT nanopore sequencing libraries (Supp. Data 1) from NCBI Sequence Read Archive (SRA) (1). We used these data to evaluate the performance of different classifier models and to train a model for our use-case, i.e. amplicon-based detection of S. Typhi from environmental surveillance samples (2). In addition, to further evaluate the performance of AmpliconTyper in our use case, we have applied an amplicon sequencing protocol (2) to generate amplicon data for S. Typhi using two S. Typhi isolates (NCBI accessions SRR5949979 and SRR7165748) provided by Satheesh Nair (UKHSA) (3). We also used same protocol to the pooled sample of American Type Culture Collection (ATCC) consisting of S. Paratyphi A (ATCC 9150D), S. Paratyphi B (ATCC-BAA-1250D), S. Paratyphi C (ATCC-BAA-1715D), Aeromonas hydrophila (ATCC-7965D), Klebsiella pneumoniae (ATCC-BAA-1706D), and Citrobacter freundii (ATCC-8090D) chosen for their close relationship to S. Typhi. The test data for classification is available at https://github.com/AntonS-bio/AmpliconTyper/tree/main/test_data. Newly generated data was deposited in European Nucleotide Archive project PRJEB81565.

genomics↗

bioRxiv2023

Automated detection and classification of polioviruses from nanopore sequencing reads using piranha

Widespread surveillance, rapid detection and appropriate intervention will be critical for successful eradication of poliovirus. With deployable next-generation sequencing (NGS) approaches, such as Oxford Nanopore Technologies MinION, the time from sample to result can be significantly reduced compared to cell culture and Sanger sequencing. We developed piranha (poliovirus investigation resource automating nanopore haplotype analysis) to aid routine poliovirus testing of both stool and environmental samples and alleviate the bioinformatic bottleneck that often exists for labs adopting novel NGS approaches. Piranha can be used for efficient intratypic differentiation of poliovirus serotypes, for classification of Sabin-like polioviruses and for detection of wild-type and vaccine derived polioviruses. It produces interactive, distributable html reports, as well as summary csv files and consensus poliovirus FASTA sequences. The reports describe each nanopore sequencing run with interpretable plots enabling researchers to easily detect the presence of poliovirus in samples and quickly disseminate their results.

bioinformatics↗

bioRxiv2020

Rapid and sensitive direct detection and identification of poliovirus from stool and environmental surveillance samples using nanopore sequencing

Global poliovirus surveillance involves virus isolation from stool and environmental samples, intratypic differential (ITD) by PCR and sequencing of the VP1 region to distinguish vaccine (Sabin), vaccine-derived and wild-type polioviruses and ensure an appropriate response. This cell-culture algorithm takes 2-3 weeks on average between sample receipt and sequencing. Direct detection of viral RNA using PCR allows faster detection but has traditionally faced challenges related to poor sensitivity and difficulties in sequencing common samples containing poliovirus and enterovirus mixtures. We present a nested PCR and nanopore sequencing protocol that allows rapid (<3 days) and sensitive direct detection and sequencing of polioviruses in stool and environmental samples. We developed barcoded primers and a real-time analysis platform that generate accurate VP1 consensus sequences from multiplexed samples. The sensitivity and specificity compared with cell-culture were 90.9% (95% Confidence Interval: 75.7-98.1%) and 99.2% (95.5-100.0%) for wild-type 1 poliovirus, 92.5% (79.6-98.4%) and 98.7% (95.4-99.8%) for vaccine and vaccine-derived serotype 2 poliovirus, and 88.3% (81.2-93.5%) and 93.2% (88.6-96.3%) for Sabin 1 and 3 poliovirus alone or in mixtures when tested on 155 stool samples in Pakistan. Variant analysis of sequencing reads also allowed identification of polioviruses and enteroviruses in artificial mixtures and was able to distinguish complex mixtures of polioviruses in environmental samples. The median identity of consensus nanopore sequences with Sanger or Illumina sequences from the same samples was >99.9%. This novel method shows promise as a faster and safer alternative to cell-culture for the detection and real-time sequencing of polioviruses in stool and environmental samples.

microbiology↗