Biology subjects

Talledge, N.

Publications and source records attributed to Talledge, N..

6 recordsLinked to original sources

bioRxiv2025

Allosteric Disordering of eIF2B Regulates the Integrated Stress Response

The ternary complex (TC), composed of translation initiation factor eIF2, GTP, and initiator methionyl tRNA, delivers the first amino acid to the ribosome to initiate protein synthesis. The activity of the decameric eukaryotic initiation factor 2B complex (eIF2B) initiates TC assembly by catalyzing GDP to GTP exchange on eIF2, thereby setting the TC levels in the cell. Stress-induced phosphorylation converts eIF2 from the substrate of the GDP/GTP exchange reaction into an inhibitor (eIF2-P) of eIF2B. This conversion reduces the cells TC levels and induces the widespread reprogramming of translation known as the Integrated Stress Response (ISR). Here, we chart an allosteric axis running through eIF2B, revealing the importance of a protrusive -helix in its {beta}-subunit, the latch-helix, that locks onto the -subunit to induce eIF2B activity. eIF2-P binding unhooks the latch-helix, opening eIF2B, which inhibits its GDP/GTP exchange activity. Distinct viral proteins have convergently evolved to bind to eIF2B and stabilize the latch-helix-bound active state. Using these insights, we generated ISR-ACTivating compounds, ISRACTs, that stabilize eIF2B in its inhibited, unlatched state. Our study thus highlights how state-transitions in eIF2B are regulated via long-range allostery.

biochemistry↗

bioRxiv2022

Human immunodeficiency virus type 2 capsid protein mutagenesis defines the determinants for Gag-Gag interactions

Human immunodeficiency virus (HIV) Gag drives virus particle assembly. The capsid (CA) domain is critical for Gag multimerization mediated by protein-protein interactions. The Gag protein interaction network defines critical aspects of the retroviral lifecycle at steps such as particle assembly and maturation. Previous studies have demonstrated that the immature particle morphology of HIV-2 is intriguingly distinct relative to that of HIV-1. Based upon this observation, we sought to determine the amino acid residues important for virus assembly that might help explain the differences between HIV-1 and HIV-2. To do this, we conducted site-directed mutagenesis of targeted locations in the HIV-2 CA domain of Gag and analyzed various aspects of virus particle assembly. A panel of 31 site-directed mutants of residues that reside at the HIV-2 CA inter-hexamer interface, intra-hexamer interface and CA inter-domain linker were created and analyzed for their effects on the efficiency of particle production, particle morphology, particle infectivity, Gag subcellular distribution and in vitro protein assembly. Seven conserved residues between HIV-1 and HIV-2 (L19, A41, I152, K153, K157, N194, D196) and two non-conserved residues (G38, N127) were found to significantly impact Gag multimerization and particle assembly. Taken together, these observations complement structural analyses of immature HIV-2 particle morphology and Gag lattice organization as well as provide important comparative insights into the key amino acid residues that can help explain the observed differences between HIV immature particle morphology and its association with virus replication and particle infectivity.

microbiology↗

bioRxiv2022

HIV-2 Immature Particle Morphology Provides Insights into Gag Lattice Stability and Virus Maturation

Retrovirus immature particle morphology consists of a membrane enclosed, pleomorphic, spherical and incomplete lattice of Gag hexamers. Previously, we demonstrated that human immunodeficiency virus type 2 (HIV-2) immature particles possess a distinct and extensive Gag lattice morphology. To better understand the nature of the continuously curved hexagonal Gag lattice, we have used single particle cryo-electron microscopy with a retrovirus to determine the HIV-2 Gag lattice structure for immature virions. The reconstruction map at 5.5 [A] resolution revealed a stable, wineglass-shaped Gag hexamer structure with structural features consistent with other lentiviral immature Gag structures. Cryo-electron tomography provided evidence for nearly complete ordered Gag lattice structures in HIV-2 immature particles. We also solved a 1.98 [A] resolution crystal structure of the carboxyl-terminal domain (CTD) of the HIV-2 capsid (CA) protein that identified a structured helix 12 supported via an interaction of helix 10 in the absence of the SP1 region of Gag. Residues at the helix 10-12 interface proved critical in maintaining HIV-2 particle release and infectivity. Taken together, our findings provide the first 3D organization of HIV-2 immature Gag lattice and important insights into both HIV Gag lattice stabilization and virus maturation.

microbiology↗

bioRxiv2019

Membrane constriction and thinning by sequential ESCRT-III polymerization

The Endosomal Sorting Complexes Required for Transport (ESCRTs) mediate diverse membrane remodeling events. These activities typically require ESCRT-III proteins to stabilize negatively-curved membranes, although recent work has indicated that certain ESCRT-IIIs also participate in positive-curvature membrane shaping reactions. ESCRT-IIIs polymerize into membrane-binding filaments, but the structural basis for negative versus positive membrane curvature shaping by these proteins remains poorly understood. To learn how ESCRT-IIIs shape membranes, we determined structures of human membrane-bound CHMP1B-only, membrane-bound CHMP1B+IST1, and IST1-only filaments by electron cryomicroscopy. Our structures show how CHMP1B first polymerizes into a single-stranded helical filament, shaping membranes into moderate-curvature tubules. Subsequently, IST1 assembles a second strand upon the CHMP1B filament, further constricting the membrane tube and reducing its diameter nearly to the fission point. Each step of constriction, moreover, thins the underlying bilayer and lowers the barrier to membrane fission. Together, our structures reveal how a two-component, sequential polymerization mechanism drives membrane tubulation, tube constriction, and bilayer thinning.

biophysics↗

bioRxiv2019

Anisotropic ESCRT-III architecture governs helical membrane tube formation

ESCRT-III proteins assemble into ubiquitous membrane-remodeling polymers during many cellular processes. Here we describe the structure of helical membrane tubes that are scaffolded by bundled ESCRT-III filaments. Cryo-ET reveals how the shape of the helical membrane tube arises from the assembly of distinct bundles of protein filaments that bind the membrane with different mean curvatures. Cryo-EM reveals how one of these ESCRT-III filaments engages the membrane tube through a novel interface. Mathematical modeling of the helical membrane tube suggests how its shape emerges from differences in membrane binding energy, positional rigidity, and membrane tension. Altogether, our findings support a model in which increasing the rigidity of ESCRT-III filaments through the assembly of multi-strands triggers buckling of the membrane.\n\nOne Sentence SummaryESCRT-III heteropolymers deform membranes into helical tubes.

biochemistry↗

bioRxiv2018

The ESCRT-III proteins IST1 and CHMP1B assemble around nucleic acids

ESCRT-III proteins can promote inside-out or outside-in membrane tubulation and fission. In addition, several observations suggest that ESCRT factors may also associate with nucleic acids during development, different stages of the cell cycle, and during retro-transposition of parasitic nucleic acids like LINE1 elements. Two ESCRT-III subunits, IST1 (aka CHMP8) and CHMP1B, can coassemble as an external protein coat around liposomes in vitro and around recycling endosomal tubules in living cells. Here we show that recombinant IST1 and CHMP1B can also copolymerize into double stranded filaments that surround nucleic acids. Electron cryo-microscopy reconstructions of nucleic acid-bound IST1-CHMP1B copolymers revealed that the polynucleotides track along a binding groove formed between filaments of the inner CHMP1B strand. The well-ordered structures also reveal that the C-terminal tails of CHMP1B subunits extrude through the outer IST1 layer to the tube exterior. As a result, the MIT domain binding motifs of both CHMP1B and IST1 are arrayed on the outer surface of the copolymer, where they could bind and recruit MIT domain-containing co-factors, such as the SPASTIN ATPase or the USP8 ubiquitin protease. Our structure raises the possibility that ESCRT-III proteins may form nucleic acid complexes in mammalian cells.

biochemistry↗