Biology subjects

Simpson, M. J.

Publications and source records attributed to Simpson, M. J..

12 recordsLinked to original sources

bioRxiv2018

A free boundary model of epithelial dynamics

In this work we analyse a one-dimensional, cell-based model of an epithelial sheet. In this model, cells interact with their nearest neighbouring cells and move deterministically. Cells also proliferate stochastically, with the rate of proliferation specified as a function of the cell length. This mechanical model of cell dynamics gives rise to a free boundary problem. We construct a corresponding continuum-limit description where the variables in the continuum limit description are expanded in powers of the small parameter 1/N, where N is the number of cells in the population. By carefully constructing the continuum limit description we obtain a free boundary partial differential equation description governing the density of the cells within the evolving domain, as well as a free boundary condition that governs the evolution of the domain. We show that care must be taken to arrive at a free boundary condition that conserves mass. By comparing averaged realisations of the cell-based model with the numerical solution of the free boundary partial differential equation, we show that the new mass-conserving boundary condition enables the coarsegrained partial differential equation model to provide very accurate predictions of the behaviour of the cell-based model, including both evolution of the cell density, and the position of the free boundary, across a range of interaction potentials and proliferation functions in the cell based model.

systems biology↗

bioRxiv2018

Parameterising continuum models of heat transfer in heterogeneous living skin using experimental data

In this work we consider a recent experimental data set describing heat conduction in living porcine tissues. Understanding this novel data set is important because porcine skin is similar to human skin. Improving our understanding of heat conduction in living skin is relevant to understanding burn injuries, which are common, painful and can require prolonged and expensive treatment. A key feature of skin is that it is layered, with different thermal properties in different layers. Since the experimental data set involves heat conduction in thin living tissues of anesthetised animals, an important experimental constraint is that the temperature within the living tissue is measured at one spatial location within the layered structure. Our aim is to determine whether this data is sufficient to reliably infer the heat conduction parameters in layered skin, and we use a simplified two-layer mathematical model of heat conduction to mimic the generation of experimental data. Using synthetic data generated at one location in the two-layer mathematical model, we explore whether it is possible to infer values of the thermal diffusivity in both layers. After this initial exploration, we then examine how our ability to infer the thermal diffusivities changes when we vary the location at which the experimental data is recorded, as well as considering the situation where we are able to monitor the temperature at two locations within the layered structure. Overall, we find that our ability to parameterise a model of heterogeneous heat conduction with limited experimental data is very sensitive to the location where data is collected. Our modelling results provide guidance about optimal experimental design that could be used to guide future experimental studies.\n\nNomenclatureA brief description of all variables used in the document are given in Table 1.\n\nO_TBL View this table:\norg.highwire.dtl.DTLVardef@121864aorg.highwire.dtl.DTLVardef@1f789c8org.highwire.dtl.DTLVardef@76c62corg.highwire.dtl.DTLVardef@1cca220org.highwire.dtl.DTLVardef@1a82158_HPS_FORMAT_FIGEXP M_TBL O_FLOATNOTable 1:C_FLOATNO O_TABLECAPTIONVariable nomenclature and description.\n\nC_TABLECAPTION C_TBL

biophysics↗

bioRxiv2018

Stochastic models of cell invasion with fluorescent cell cycle indicators

Fluorescent cell cycle labelling in cell biology experiments provides real time information about the location of individual cells, as well as the phase of the cell cycle of individual cells. We develop a stochastic, lattice-based random walk model of a two-dimensional scratch assay where the total population is composed of three distinct subpopulations which we visualise as red, yellow and green subpopulations. Our model mimics FUCCI technology in which cells in the G1 phase of the cell cycle fluoresce red, cells in the early S phase fluoresce yellow, and cells in the S/G2/M phase fluoresce green. The model is an exclusion process so that any potential motility or proliferation event that would place an agent on an occupied lattice site is aborted. Using experimental images and previous experimental measurements, we explain how to apply the stochastic model to simulate a scratch assay initialised with a low to moderate density monolayer of human melanoma cell line. We obtain additional mathematical insight by deriving an approximate partial differential equation (PDE) description of the stochastic model, leading to a novel system of three coupled nonlinear reaction diffusion equations. Comparing averaged simulation data with the solution of the continuum limit model confirms that the PDE description is accurate for biologically-relevant parameter combinations.

biophysics↗

bioRxiv2018

Spatial moment description of birth-death-movementprocesses incorporating the effects of crowding andobstacles

Birth-death-movement processes, modulated by interactions between individuals, are fundamental to many cell biology processes. A key feature of the movement of cells within in vivo environments are the interactions between motile cells and stationary obstacles. Here we propose a multi-species model of individual-level motility, proliferation and death. This model is a spatial birth-death-movement stochastic process, a class of individual-based model (IBM) that is amenable to mathematical analysis. We present the IBM in a general multi-species framework, and then focus on the case of a population of motile, proliferative agents in an environment populated by stationary, non-proliferative obstacles. To analyse the IBM, we derive a system of spatial moment equations governing the evolution of the density of agents and the density of pairs of agents. This approach avoids making the usual mean-field assumption so that our models can be used to study the formation of spatial structure, such as clustering and aggregation, and to understand how spatial structure influences population-level outcomes. Overall the spatial moment model provides a reasonably accurate prediction of the system dynamics, including important effects such as how varying the properties of the obstacles leads to different spatial patterns in the population of agents.

biophysics↗

bioRxiv2017

Inferring parameters for a lattice-free model of cell migration and proliferation using experimental data

Collective cell spreading takes place in spatially continuous environments, yet it is often modelled using discrete lattice-based approaches. Here, we use data from a series of cell proliferation assays, with a prostate cancer cell line, to calibrate a spatially continuous individual based model (IBM) of collective cell migration and proliferation. The IBM explicitly accounts for crowding effects by modifying the rate of movement, direction of movement, and the rate of proliferation by accounting for pair-wise interactions. Taking a Bayesian approach we estimate the free parameters in the IBM using rejection sampling on three separate, independent experimental data sets. Since the posterior distributions for each experiment are similar, we perform simulations with parameters sampled from a new posterior distribution generated by combining the three data sets. To explore the predictive power of the calibrated IBM, we forecast the evolution of a fourth experimental data set. Overall, we show how to calibrate a lattice-free IBM to experimental data, and our work highlights the importance of interactions between individuals. Despite great care taken to distribute cells as uniformly as possible experimentally, we find evidence of significant spatial clustering over short distances, suggesting that standard mean-field models could be inappropriate.

cell biology↗

bioRxiv2017

The impact of experimental design choices on parameter inference for models of growing cell colonies

To better understand development, repair and disease progression it is useful to quantify the behaviour of proliferative and motile cell populations as they grow and expand to fill their local environment. Inferring parameters associated with mechanistic models of cell colony growth using quantitative data collected from carefully designed experiments provides a natural means to elucidate the relative contributions of various processes to the growth of the colony. In this work we explore how experimental design impacts our ability to infer parameters for simple models of the growth of proliferative and motile cell populations. We adopt a Bayesian approach, which allows us to characterise the uncertainty associated with estimates of the model parameters. Our results suggest that experimental designs that incorporate initial spatial heterogeneities in cell positions facilitate parameter inference without the requirement of cell tracking, whilst designs that involve uniform initial placement of cells require cell tracking for accurate parameter inference. As cell tracking is an experimental bottleneck in many studies of this type, our recommendations for experimental design provide for significant potential time and cost savings in the analysis of cell colony growth.

cell biology↗

bioRxiv2017

A computational modelling framework to quantify the effects of passaging cell lines

In vitro cell culture is routinely used to grow and supply a sufficiently large number of cells for various types of cell biology experiments. Previous experimental studies report that cell characteristics evolve as the passage number increases, and various cell lines can behave differently at high passage numbers. To provide insight into the putative mechanisms that might give rise to these differences, we perform in silico experiments using a random walk model to mimic the in vitro cell culture process. Our results show that it is possible for the average proliferation rate to either increase or decrease as the passaging process takes place, and this is due to a competition between the initial heterogeneity and the degree to which passaging damages the cells. We also simulate a suite of scratch assays with cells from near-homogeneous and heterogeneous cell lines, at both high and low passage numbers. Although it is common in the literature to report experimental results without disclosing the passage number, our results show that we obtain significantly different closure rates when performing in silico scratch assays using cells with different passage numbers. Therefore, we suggest that the passage number should always be reported to ensure that the experiment is as reproducible as possible. Furthermore, our modelling also suggests some avenues for further experimental examination that could be used to validate or refine our simulation results.

biophysics↗

bioRxiv2017

A Bayesian computational approach to explore the optimal duration of a cell proliferation assay

Cell proliferation assays are routinely used to explore how a low density monolayer of cells grows with time. For a typical cell line with a doubling time of 12 hours (or longer), a standard cell proliferation assay conducted over 24 hours provides excellent information about the low-density exponential growth rate, but limited information about crowding effects that occur at higher densities. To explore how we can best detect and quantify crowding effects, we present a suite of in silico proliferation assays where cells proliferate according to a generalised logistic growth model. Using approximate Bayesian computation we show that data from a standard cell proliferation assay cannot reliably distinguish between classical logistic growth and more general non-logistic growth models. We then explore, and quantify, the trade-off between increasing the duration of the experiment and the associated decrease in uncertainty in the crowding mechanism.

biophysics↗

bioRxiv2017

Quantifying the efficacy of first aid treatments for burn injuries using mathematical modelling and in vivo porcine experiments

First aid treatment of burn injuries reduces scarring and improves healing. Here, we quantify the efficacy of various first aid treatments by using a mathematical model to describe a suite of experimental data from a series of in vivo porcine experiments. We study a series of consistent burn injuries that are subject to first aid treatments that vary in both the temperature and duration of the first aid treatment. Calibrating the mathematical model to the experimental data provides estimates of the in vivo thermal diffusivity, the rate at which thermal energy is lost to the blood (perfusion), and the heat transfer coefficient controlling the loss of thermal energy at the interface of the fat and muscle layers. A limitation of working with in vivo animal experiments is the difficulty of resolving spatial variations in temperature across the tissues. Here, we use the solution of the calibrated mathematical model to predict and visualise the temperature distribution across the thickness of the tissue during the creation of the burn injury and the application of various first aid treatments. Using this information we propose, and report values for, a novel measure of the potential for tissue damage. This measure quantifies two important aspects that are thought to be related to thermal injury: (i) the volume of tissue that rises above the threshold temperature associated with the accumulation of tissue damage; and, (ii) the duration of time that the tissue remains above this threshold temperature. We conclude by discussing the clinical relevance of our findings.

biophysics↗

bioRxiv2017

Quantifying Rates Of Cell Migration And Cell Proliferation In Co-Culture Barrier Assays Reveals How Skin And Melanoma Cells Interact During Melanoma Spreading And Invasion

Malignant spreading involves the migration of cancer cells amongst other native cell types. For example, in vivo melanoma invasion involves individual melanoma cells migrating through native skin, which is composed of several distinct subpopulations of cells. Here, we aim to quantify how interactions between melanoma and fibroblast cells affect the collective spreading of a heterogeneous population of these cells in vitro. We perform a suite of circular barrier assays that includes: (i) monoculture assays with fibroblast cells; (ii) monoculture assays with SK-MEL-28 melanoma cells; and (iii) a series of co-culture assays initiated with three different ratios of SK-MEL-28 melanoma cells and fibroblast cells. Using immunostaining, detailed cell density histograms are constructed to illustrate how the two subpopulations of cells are spatially arranged within the spreading heterogeneous population. Calibrating the solution of a continuum partial differential equation to the experimental results from the monoculture assays allows us to estimate the cell diffusivity and the cell proliferation rate for the melanoma and the fibroblast cells, separately. Using the parameter estimates from the monoculture assays, we then make a prediction of the spatial spreading in the co-culture assays. Results show that the parameter estimates obtained from the monoculture assays lead to a reasonably accurate prediction of the spatial arrangement of the two subpopulations in the co-culture assays. Overall, the spatial pattern of spreading of the melanoma cells and the fibroblast cells is very similar in monoculture and co-culture conditions. Therefore, we find no clear evidence of any interactions other than cell-to-cell contact and crowding effects.

cancer biology↗

bioRxiv2017

Continuum approximations for lattice-free multi-species models of collective cell migration

Abstract\n\nCell migration within tissues involves the interaction of many cells from distinct subpopulations. In this work, we present a discrete model of collective cell migration where the motion of individual cells is driven by random forces, short range repulsion forces to mimic crowding, and longer range attraction forces to mimic adhesion. This discrete model can be used to simulate a population of cells that is composed of K [≥] 1 distinct subpopulations. To analyse the discrete model we formulate a hierarchy of moment equations that describe the spatial evolution of the density of agents, pairs of agents, triplets of agents, and so forth. To solve the hierarchy of moment equations we introduce two forms of closure: (i) the mean field approximation, which effectively assumes that the distributions of individual agents are independent; and (ii) a moment dynamics description that is based on the Kirkwood superposition approximation. The moment dynamics description provides an approximate way of incorporating spatial patterns, such as agent clustering, into the continuum description. Comparing the performance of the two continuum descriptions confirms that both perform well when adhesive forces are sufficiently weak. In contrast, the moment dynamics description outperforms the mean field model when adhesive forces are sufficiently large. This is a first attempt to provide an accurate continuum description of a lattice-free, multi-species model of collective cell migration.

biophysics↗

bioRxiv2017

A new and accurate continuum description of moving fronts

Processes that involve moving fronts of populations are prevalent in ecology and cell biology. A common approach to describe these processes is a lattice-based random walk model, which can include mechanisms such as crowding, birth, death, movement and agent-agent adhesion. However, these models are generally analytically intractable and it is computationally expensive to perform sufficiently many realisations of the model to obtain an estimate of average behaviour that is not dominated by random fluctuations. To avoid these issues, both mean-field and corrected mean-field continuum descriptions of random walk models have been proposed. However, both continuum descriptions are inaccurate outside of limited parameter regimes, and corrected mean-field descriptions cannot be employed to describe moving fronts. Here we present an alternative description in terms of the dynamics of groups of contiguous occupied lattice sites and contiguous vacant lattice sites. Our description provides an accurate prediction of the average random walk behaviour in all parameter regimes. Critically, our description accurately predicts the persistence or extinction of the population in situations where previous continuum descriptions predict the opposite outcome. Furthermore, unlike traditional mean-field models, our approach provides information about the spatial clustering within the population and, subsequently, the moving front.

biophysics↗