Biology subjects

Rutkowski, D. M.

Publications and source records attributed to Rutkowski, D. M..

8 recordsLinked to original sources

bioRxiv2026

Breaking the bottleneck: semi-automated quantification of actin filament dynamics

Actin reconstitution assays visualized by total internal reflection fluorescence (TIRF) microscopy have been crucial for defining mechanisms of filament assembly, disassembly, and higher-order organization. Yet quantitative analysis remains slow, labor-intensive, and subject to investigator bias. We developed SMAUG (Single filament Measurement and Analysis Using a GUI), a semi-automated image analysis interface that extends TSOAX filament segmentation and tracking with user-verified trace analysis of time-lapse TIRF images. SMAUG generates kymographs and quantifies filament nucleation, elongation, pausing, junctions, and filament-associated fluorescence while retaining measurements at the individual filament level. We tested the approach across actin reconstitution assays producing concentration-dependent polymerization, formin-stimulated elongation, capping-induced arrest, Arp2/3 branching, and fascin-mediated bundling. SMAUG reproduced manual measurement while reducing analysis time and revealed where dense networks and bundled filaments require user validation. Together, TSOAX and SMAUG provide a semi-automated approach for quantitative analysis of actin filament dynamics.

cell biology↗

bioRxiv2025

Immune Cell Migration Models Synergize Nuclear Piston, Uropod, and Microenvironment into Hydraulic Cell Engine

The nucleus and uropod are the largest and most mechanically distinct structures in migrating amoeboid lymphocytes, including NK, B, and T cells. The biophysical properties of these structures may shape the ability of immune cells to navigate dense tissue microenvironments during immune surveillance. Using bead-spring and agent-based cell models, we explore the biomechanical contributions of the nucleus, uropod, septin-templated cortical rings, actomyosin cytoskeleton, and extracellular matrix obstacles to lymphocyte migration. Our results support a migration model in which, following cell-matrix collisions, septins mediate the formation of cortical rings that hydraulically seal cytoplasmic compartments on each side of the passing nucleus, generating a pressure difference that propels the nucleus forward. This hydraulically driven nuclear piston actively enhances migration through confined spaces. Concurrently, the uropod emerging from the peristaltic collapse of rear compartments stabilizes directional persistence and prevents T cell repolarization. We show that such polarity stabilization boosts immune surveillance efficiency. Together, these models redefine the nucleus as an active component of the migratory engine and the uropod as a locomotion stabilizer. Furthermore, the models offer a predictive framework towards engineering of immune cell motility in complex tissue microenvironments with broad implications for cancer immunotherapy, aging, and regenerative medicine.

biophysics↗

bioRxiv2024

Ca2+-dependent vesicular and non-vesicular lipid transfer controls hypoosmotic plasma membrane expansion

Robust coordination of surface and volume changes is critical for cell integrity. Few studies have elucidated the plasma membrane (PM) remodeling events during cell surface and volume alteration, especially regarding PM sensing and its subsequent rearrangements. Here, using fission yeast protoplasts, we reveal a Ca2+-dependent mechanism for membrane addition that ensures PM integrity and allows its expansion during acute hypoosmotic cell swelling. We show that MscS-like mechanosensitive channels activated by PM tension control extracellular Ca2+ influx, which triggers direct lipid transfer at endoplasmic reticulum (ER)-PM contact sites by conserved extended-synaptotagmins and accelerates exocytosis, enabling PM expansion necessary for osmotic equilibrium. Defects in any of these key events result in rapid protoplast rupture upon severe hypotonic shock. Our numerical simulations of hypoosmotic expansion further propose a cellular strategy that combines instantaneous non-vesicular lipid transfer with bulk exocytic membrane delivery to maintain PM integrity for dramatic cell surface/volume adaptation.

cell biology↗

bioRxiv2024

Myosin-I Synergizes with Arp2/3 Complex to Enhance Pushing Forces of Branched Actin Networks

Myosin-Is colocalize with Arp2/3 complex-nucleated actin networks at sites of membrane protrusion and invagination, but the mechanisms by which myosin-I motor activity coordinates with branched actin assembly to generate force are unknown. We mimicked the interplay of these proteins using the "comet tail" bead motility assay, where branched actin networks are nucleated by Arp2/3 complex on the surface of beads coated with myosin-I and the WCA domain of N-WASP. We observed that myosin-I increased bead movement efficiency by thinning actin networks without affecting growth rates. Remarkably, myosin-I triggered symmetry breaking and comet-tail formation in dense networks resistant to spontaneous fracturing. Even with arrested actin assembly, myosin-I alone could break the network. Computational modeling recapitulated these observations suggesting myosin-I acts as a repulsive force shaping the networks architecture and boosting its force-generating capacity. We propose that myosin-I leverages its power stroke to amplify the forces generated by Arp2/3 complex-nucleated actin networks.

biophysics↗

bioRxiv2023

Cdc42 mobility and membrane flows regulate fission yeast cell shape and survival

Local Cdc42 GTPase activation promotes polarized exocytosis, resulting in membrane flows that deplete low-mobility membrane-associated proteins from the growth region. To investigate the self-organizing properties of the Cdc42 secretion-polarization system under membrane flow, we developed a reaction-diffusion particle model. The model includes positive feedback activation of Cdc42, hydrolysis by GTPase-activating proteins (GAPs), and flow-induced displacement by exo/endocytosis. Simulations show how polarization relies on flow-induced depletion of low mobility GAPs. To probe the role of Cdc42 mobility in the fission yeast Schizosaccharomyces pombe, we changed its membrane binding properties by replacing its prenylation site with 1, 2 or 3 repeats of the Rit1 C terminal membrane binding domain (ritC), yielding alleles with progressively lower unbinding and diffusion rates. Concordant modelling predictions and experimental observations show that lower Cdc42 mobility results in lower Cdc42 activation level and wider patches. Indeed, while Cdc42-1ritC cells are viable and polarized, Cdc42-2ritC polarize poorly and Cdc42-3ritC is inviable. The model further predicts that GAP depletion increases Cdc42 activity at the expense of loss of polarization. Experiments confirm this prediction, as deletion of Cdc42 GAPs restores viability to Cdc42-3ritC cells. Our combined experimental and modelling studies demonstrate how membrane flows are an integral part of Cdc42-driven pattern formation. Significance StatementThe delivery of new membrane from internal pools at zones of polarized secretion induces in-plane plasma membrane flows that displace slowly mobile membrane-associated proteins from the zone of secretion. However, zones of polarized secretion are themselves specified by the activity of membrane-associated polarity factors, such as the small GTPase Cdc42. Through combined modelling and experimental approaches, this work demonstrates that the fast mobility of the Cdc42 GTPase is critical to allow the establishment and maintenance of a polarity patch, which is reinforced by flow-mediated displacement of a negative regulator.

cell biology↗

bioRxiv2022

Compressive forces stabilise microtubules in living cells

Cell mechano-sensation and adaptation are supported by the actin network. The microtubule network is not considered to be directly sensitive to mechanical forces acting on a cell. However, recent studies on isolated microtubules in vitro have shown that bending forces have an impact on their structure, composition and lifespan, suggesting that, in a cellular context, microtubules may react to mechanical forces. We tested this hypothesis in living cells by subjecting them to cycles of compressive forces and found that microtubules became distorted, less dynamic and more stable. This mechano-stabilisation depends on CLASP2, which relocates from the end to the deformed shaft of microtubules. These results demonstrate that microtubules in living cells have mechano-responsive properties that allow them to resist and even counteract the forces to which they are subjected.

cell biology↗

bioRxiv2021

Discrete mechanical model of lamellipodial actin network implements molecular clutch mechanism and generates arcs and microspikes

Mechanical forces, actin filament turnover, and adhesion to the extracellular environment regulate lamellipodial protrusions. Computational and mathematical models at the continuum level have been used to investigate the molecular clutch mechanism, calculating the stress profile through the lamellipodium and around focal adhesions. However, the forces and deformations of individual actin filaments have not been considered while interactions between actin networks and actin bundles is not easily accounted with such methods. We develop a filament-level model of a lamellipodial actin network undergoing retrograde flow using 3D Brownian dynamics. Retrograde flow is promoted in simulations by pushing forces from the leading edge (due to actin polymerization), pulling forces (due to molecular motors), and opposed by viscous drag in cytoplasm and focal adhesions. Simulated networks have densities similar to measurements in prior electron micrographs. Connectivity between individual actin segments is maintained by permanent and dynamic crosslinkers. Remodeling of the network occurs via the addition of single actin filaments near the leading edge and via filament bond severing. We investigated how several parameters affect the stress distribution, network deformation and retrograde flow speed. The model captures the decrease in retrograde flow upon increase of focal adhesion strength. The stress profile changes from compression to extension across the leading edge, with regions of filament bending around focal adhesions. The model reproduces the observed reduction in retrograde flow speed upon exposure to cytochalasin D, which halts actin polymerization. Changes in crosslinker concentration and dynamics, as well as in the orientation pattern of newly added filaments demonstrate the models ability to generate bundles of filaments perpendicular (actin arcs) or parallel (microspikes) to the protruding direction.

biophysics↗

bioRxiv2020

Cell patterning by secretion-induced plasma membrane flows

Cells self-organize using reaction-diffusion and fluid-flow principles. Whether bulk membrane flows contribute to cell patterning has not been established. Here, using mathematical modelling, optogenetics and synthetic probes, we show that polarized exocytosis causes lateral membrane flows away from regions of membrane insertion. Plasma membrane-associated proteins with sufficiently low diffusion and/or detachment rates couple to the flows and deplete from areas of exocytosis. In rod-shaped fission yeast cells, zones of Cdc42 GTPase activity driving polarized exocytosis are limited by GTPase activating proteins (GAPs). We show that membrane flows pattern the GAP Rga4 distribution and coupling of a synthetic GAP to membrane flows is sufficient to establish the rod shape. Thus, membrane flows induced by Cdc42-dependent exocytosis form a negative feedback restricting the zone of Cdc42 activity. One Sentence SummaryExocytosis causes bulk membrane flows that drag associated proteins and form a negative feedback restricting the exocytic site.

cell biology↗