Biology subjects

Russom, A.

Publications and source records attributed to Russom, A..

3 recordsLinked to original sources

bioRxiv2025

Sheathless elasto-inertial focusing of sub-25 nm particles in straight microchannels

Nanoscale biological particles, such as lipoproteins (10-80 nm) or extracellular vesicles (30-200 nm), play pivotal roles in health and disease, including conditions like cardiovascular disorders and cancer. Their effective analysis is crucial for applications in diagnostics, quality control, and nanomedicine development. While elasto-inertial focusing offers a powerful method to manipulate particles without external fields, achieving consistent focusing of nanoparticles (<500 nm) has remained a challenge. In this study, we experimentally demonstrate elasto-inertial focusing of nanoparticles as small as 25 nm using straight high-aspect-ratio microchannels in a sheathless flow. Systematic investigations reveal the influence of channel width, particle size, viscoelastic concentration, and flow rate on focusing behavior. Additionally, through numerical simulations and experimental validation, we provide insights into particle migration dynamics and viscoelastic forces governing nanoparticle focusing. Finally, we successfully focus biological particles, including liposomes (90-140 nm), extracellular vesicles (100 nm), and lipoproteins (10-25 nm), under optimized conditions, showcasing potential applications in medical diagnostics and targeted drug delivery. These findings mark a significant advancement toward size-based high-resolution particle separation, with implications for biomedicine and environmental sciences.

bioengineering↗

bioRxiv2021

Optofluidic Fiber Component for Separation and counting of Micron-Sized Particles

An all-fiber separation component capable of sorting and counting micron-sized particles based on size is presented. A sequence of silica fiber capillaries with various diameters and longitudinal cavities were used to fabricate the component for separation and detection in an uninterrupted flow. Fluorescence microparticles of 1 m and 10 m sizes are mixed in a visco-elastic fluid and infused into the all-fiber separation component. Elasto-inertial forces focus the larger particle to the center of the silica capillary, while the smaller microparticles exit from a side capillary. Analysis of the separated particles at the output showed a separation efficiency of 100% for the 10 m and 97% for the 1 m particles. In addition, the counting of the larger particles is demonstrated in the same flow. The separated 10 m particles are further routed through another all-fiber component for counting. A counting speed of ~1400 particles/min and with the variation in amplitude of 10% is achived. A combination of separation and counting can be powerful tool may find several applications in biology and medicine, such as separation and analysis of exosomes, bacteria, and blood cell sub-populations.

bioengineering↗

bioRxiv2020

High resolution and high throughput bacteria separation from blood using elasto-inertial microfluidics

Improved sample preparation has the potential to address a huge unmet need for fast turnaround sepsis tests that enable early administration of appropriate antimicrobial therapy. In recent years, inertial and elasto-inertial microfluidics-based sample preparation has gained substantial interest for bioparticle separation applications. However, for applications in blood stream infections the throughput and bacteria separation efficiency has thus far been limited. In this work, for the first time we report elasto-inertial microfluidics-based bacteria isolation from blood at throughputs and efficiencies unparalleled with current microfluidics-based state of the art. In the method, bacteria-spiked blood sample is prepositioned close to the outer wall of a spiral microchannel using a viscoelastic sheath buffer. The blood cells will remain fully focused throughout the length of the channel while bacteria migrate to the inner wall for effective separation. Initially, particles of different sizes were used to investigate particle focusing and the separation performance of the spiral device. A separation efficiency of 96% for the 1 {micro}m particles was achieved, while 100% of 3 {micro}m particles were recovered at the desired outlet at a high throughput of 1 mL/min. Following, processing blood samples revealed a minimum of 1:2 dilution was necessary to keep the blood cells fully focus at the outer wall. In experiments involving bacteria spiked in diluted blood, viable E.coli were continuously separated at a total flow rate of 1 mL/min, with an efficiency between 82 to 90% depending on the blood dilution. Using a single spiral, it takes 40 minutes to process 1 mL of blood at a separation efficiency of 82% and 3 hours at 90% efficiency. To the best of our knowledge, this is the highest blood sample throughput per single microfluidic chip reported for the corresponding separation efficiency. As such, the label-free, passive and high throughput bacteria isolation method has a great potential for speeding up downstream phenotypic and molecular analysis of bacteria.

biophysics↗