Biology subjects

Rnjak-Kovacina, J.

Publications and source records attributed to Rnjak-Kovacina, J..

4 recordsLinked to original sources

bioRxiv2026

Adhesive silk hydrogel patches for localized and sustained delivery of cell-derived nanovesicles

The transplantation of stem cell-derived extracellular vesicles (EVs) holds promise for tissue repair and regeneration, but scalable production and effective delivery to target tissue remain major challenges. Here, we present a biomaterial platform that combines high-yield, scalable nanovesicles (NVs) - EV mimetics derived from human induced pluripotent stem cells - with an adhesive silk hydrogel patch for localized and sustained delivery. We show that this platform enables efficient NV encapsulation via visible light crosslinking and supports controlled release over short (2 days), intermediate (7 days), and extended (up to 28 days) periods, while maintaining adhesion to heart tissue. Importantly, the sustained delivery of NVs for 3 days in vitro results in promoting anti-fibrotic cell remodeling and significant functional recovery of primary myofibroblast activation, modulating integrin signaling, actomyosin organization, and cell-matrix adhesion networks. Finally, we demonstrate biocompatibility, retention, and anti-fibrotic function of the patch in a murine ischemia-reperfusion injury model. Thus, we establish the proof-of-principle that di-tyrosine silk hydrogels can be used as a strategy to encapsulate and deliver NVs to the heart, thus offering an innovative delivery platform for NVs. Statement of significanceExtracellular vesicles (EVs) represent an emerging frontier in tissue engineering. Their cell-specific cargo contains biological information capable of repairing and regenerating injured tissues. However, their clinical translation is hindered by limited manufacturing scalability, undefined dosing and modes of administration, and low organ retention, particularly in the heart. This study addresses these challenges by combining stem cell-derived nanovesicles (NVs), which mimic biological EVs, with an adhesive hydrogel patch for localized and sustained delivery to the heart. We provide proof-of-principle that di-tyrosine photo-crosslinked silk hydrogels are a suitable delivery platform for cell-derived NVs, preserving NV bioactivity and their ability to remodel recipient cells following delivery both in vitro and in vivo. This study integrates three key advantages: (i) the use of scalable iPSC-derived nanovesicles as an EV-mimetic platform, addressing limitations in EV manufacturing; (ii) a mechanically robust and tunable silk fibroin hydrogel formed via visible light-induced di-tyrosine crosslinking without chemical modification; and (iii) an injection-free, adhesive patch-based delivery strategy enabling localized and sustained therapeutic administration to the heart. This innovative platform represents a significant advancement in the fields of nanomedicine and biomedical engineering. O_FIG O_LINKSMALLFIG WIDTH=200 HEIGHT=108 SRC="FIGDIR/small/722555v1_ufig1.gif" ALT="Figure 1"> View larger version (26K): org.highwire.dtl.DTLVardef@fed253org.highwire.dtl.DTLVardef@1a270b0org.highwire.dtl.DTLVardef@19437c1org.highwire.dtl.DTLVardef@1d863ca_HPS_FORMAT_FIGEXP M_FIG O_FLOATNOGraphical abstractC_FLOATNO C_FIG

bioengineering↗

bioRxiv2025

Evaluating Flow-Focused Microfluidic Device Fabrication Techniques for Silk Fibroin Microgel Production

Microgels, or micro-scale hydrogels, are versatile emerging biomaterials. They absorb large amounts of water and facilitate molecule transfer. Their tunable size and shape and the capacity to form 3D scaffolds with microscale porosity offer significant advantages over traditional bulk hydrogels. Various strategies exist for fabricating microgels with microfluidic techniques offering the most control of microgel properties. This study compares three microfluidic device fabrication techniques--maskless photolithography, laser engraving, and 3D printing--for making photo-crosslinked silk fibroin microgels. Silk microgels were fabricated via water-in-oil microfluidics and crosslinked through di-tyrosine bonds between native tyrosine residues in silk. Microfluidic devices with target channel depths of 50, 100, or 400 {micro}m were successfully fabricated, with each technique offering unique advantages and limitations. Maskless photolithography provided the highest channel patterning accuracy and smoothest profiles but was costly and required specialized facilities. Laser engraving was affordable but labor-intensive, with lower accuracy in the X-Y plane for deeper channels. 3D printing was user-friendly and affordable but resulted in low accuracy for 50 {micro}m channels and rougher channel profiles, leading to larger microgels and less efficient microgel formation than the other techniques. Spherical silk microgels with diameters between 50 {micro}m and > 400 {micro}m were produced by modulating channel depth and flow rates, while rod-shaped microgels were made by crosslinking in the outlet tubing. Silk molecular weight was adjusted to control surface porosity and compressive modulus, with lower molecular weight silk resulting in higher porosity and softer microgels (modulated between [~] 40 kPa and [~] 590 kPa) while maintaining consistent size. This study demonstrates the versatility and effectiveness of different microfluidic device fabrication techniques for producing photo-crosslinked silk microgels with tunable properties for biomedical applications.

bioengineering↗

bioRxiv2022

Gas modulating microcapsules for spatiotemporal control of hypoxia

Oxygen is a vital molecule involved in regulating development, homeostasis, and disease. The oxygen levels in tissue vary from 1 to 8% with deviations having major biological consequences. In this work, we developed an approach to encapsulate enzymes and nanozymes, at an unprecedented loading capacity, which precisely controls the oxygen content in cell culture. Here, a single microcapsule is able to locally perturb the oxygen balance, and varying the concentration and distribution of matrix embedded microcapsules provides spatiotemporal control. We demonstrate attenuation of hypoxia signaling in populations of stem cells, cancer cells, endothelial cells, and cancer spheroids. Capsule containing hydrogel films applied to chick chorioallantoic membranes encourage neovascularization, providing scope for topical treatments or hydrogel wound dressings. We further demonstrate versatility by loading capsules with ceria nanorods as "nanozymes" to modulate active oxygen species with potential as a cytoprotective treatment. The approach can be used in multiple formats, including deposition in hydrogels, as granular solids for 3D bioprinting, and as injectable biomaterials. Overall, this platforms simplicity and flexibility will prove useful for fundamental studies of oxygen-mediated processes in virtually any in vitro or in vivo format, with scope for inclusion in biomedical materials where controlling hypoxia may be clinically advantageous.

bioengineering↗

bioRxiv2021

Impact of sterilization on a conjugated polymer based bioelectronic patch

Translation into the clinic of organic bioelectronic devices having conjugated polymers as the active material will hinge on their long-term operation in vivo. This will require the device to be subject to clinically approved sterilization techniques without a deterioration in its physical and electronic properties. To date, there remains a gap in the literature addressing the impact of this critical pre-operative procedure on the properties of conjugated polymers. This study aims to address this gap by assessing the physical and electronic properties of a sterilized porous bioelectronic patch having polyaniline as the conjugated polymer. The patch was sterilized by autoclave, ethylene oxide and gamma ({gamma}-) irradiation at 15, 25, and 50 kGy doses. Autoclaving resulted in cracking and macroscopic degradation of the patch, while patches sterilized by {gamma}-irradiation at 50 kGy exhibited reduced mechanical and electronic properties, attributed to chain scission and non-uniform crosslinking caused by the high dose irradiation. Ethylene oxide and {gamma}-irradiation at 15 and 25 kGy sterilization appeared to be the most effective at maintaining the mechanical and electronic properties of the patch, as well as inducing a minimal immune response as revealed by a receding fibrotic capsule after 4 weeks implantation. Our findings pave the way towards closing the gap for the translation of organic bioelectronic devices from acute to long-term in vivo models.

bioengineering↗