bioRxiv Science⌕ Search

Biology subjects

Richter, R. P.

Publications and source records attributed to Richter, R. P..

11 recordsLinked to original sources

A long-chain heparan sulfate capture mechanism directs paracrine GDNF-GFRα1 signalling through RET

The receptor tyrosine kinase RET is activated by GDNF and GFR1 together as a bipartite ligand, driving receptor activation and signalling in developmental and neuroprotective contexts. Evidence from developmental and cell models has suggested that heparan sulfate (HS) functions as a fourth component in RET signalling by binding to GDNF, but the molecular details remain unclear. Here, we present the cryo-EM structure of the heterohexameric RET:GDNF:GFR1 complex with a fully resolved heparin ligand, revealing an unexpected extended HS binding site spanning all three proteins. The architecture of the complex and binding mode of the HS chain in this complex enables the formation of a higher order 4:4:4 assembly bound to a single 30-saccharide HS chain which bridges two intimately bound complexes. This multi-protein interface selectively binds the highly sulfated domains of HS over other GAG classes, and is essential for RET activation in trans with soluble GFR1, but not in cis when GFR1 is membrane-bound. Our data suggest that HS shapes the dynamics of RET signalling at every stage, from ligand diffusion to signalling complex formation. Thus, GDNF-GFRa1 paracrine signalling reveals a surprising dependence for long-chain GAG function in which the glycan engages in both receptor complex assembly and clustering.

biochemistry↗

Plasma regulates homeostatic pulmonary endothelial signaling to mitigate vascular leak following polytrauma and hemorrhagic shock

IntroductionIn hemorrhagic shock, plasma resuscitation preserves vascular integrity and protects against trauma-induced coagulopathy and organ injury. Despite demonstrated clinical benefit, the endothelial mechanisms underlying plasma resuscitation remain incompletely defined. This study investigated endothelial-specific responses to plasma resuscitation to identify targetable pathways that promote vascular repair after traumatic injury. MethodsA murine model of severe polytrauma-hemorrhagic shock (PT/HS) with demonstrable vascular endotheliopathy by 24 hours was used to compare pulmonary vascular endothelial cell (EC) responses to resuscitation with lactated Ringers (LR) relative to fresh frozen plasma (FFP). Whole blood was collected for inflammatory biomarker analysis, and pulmonary vascular leak was quantified by dextran extravasation. Pulmonary EC glycocalyx (eGC) structure was assessed by transmission electron microscopy and immunofluorescence. Spatial transcriptomic profiling of pulmonary ECs was performed using a GeoMx Digital Spatial Profiler. Key transcriptomic findings related to mitochondrial biogenesis were validated by immunostaining and by treating primary human lung EC with FFP or LR. ResultsAt 24 hours after injury, FFP reduced systemic inflammatory cytokines, pulmonary innate immune cell infiltration, and PT/HS-induced vascular leak compared to LR. Plasma levels of syndecan-1, syndecan-4, and hyaluronan were decreased, consistent with enhanced pulmonary eGC expression. Although few differences in eGC-related genes were detected, pathway analysis revealed enrichment of cellular bioenergetics and metabolic recovery pathways in ECs after FFP, whereas LR was associated with oxidative stress and inflammatory signaling. FFP enhanced mitochondrial content in pulmonary EC after PT/HS and in treated human EC compared to LR-treated controls. ConclusionsFFP resuscitation after PT/HS reduces systemic inflammation and preserves pulmonary vascular barrier function, potentially through promotion of mitochondrial signaling, metabolic recovery, and endothelial stress regulation.

cell biology↗

The structural organisation of pentraxin-3 and its interactions with heavy chains of inter-alpha-inhibitor regulate crosslinking of the hyaluronan matrix

Pentraxin-3 (PTX3) is an octameric protein, comprised of eight identical protomers, that has diverse functions in reproductive biology, innate immunity and cancer. PTX3 interacts with the large polysaccharide hyaluronan (HA) to which heavy chains (HCs) of the inter--inhibitor (II) family of proteoglycans are covalently attached, playing a key role in the (non-covalent) crosslinking of HC*HA complexes. These interactions stabilise the cumulus matrix, essential for ovulation and fertilisation in mammals, and are also implicated in the formation of pathogenic matrices in the context of viral lung infections. To better understand the physiological and pathological roles of PTX3 we have analysed how its quaternary structure underpins HA crosslinking via its interactions with HCs. A combination of X-ray crystallography, cryo-electron microscopy (cryo-EM) and AlphaFold predictive modelling revealed that the C-terminal pentraxin domains of the PTX3 octamer are arranged in a central cube, with two long extensions on either side, each formed from four protomers assembled into tetrameric coiled-coil regions, essentially as described by (Noone et al., 2022; doi:10.1073/pnas.2208144119). From crystallography and cryo-EM data, we identified a network of inter-protomer salt bridges that facilitate the assembly of the octamer. Small angle X-ray scattering (SAXS) validated our model for the octameric protein, including the analysis of two PTX3 constructs: a tetrameric Half-PTX3 and a construct missing the 24 N-terminal residues ({Delta}1-24-PTX3). SAXS determined a length of [~]520 [A] for PTX3 and, combined with 3D variability analysis of cryo-EM data, defined the flexibility of the N-terminal extensions. Biophysical analyses revealed that the prototypical heavy chain HC1 does not interact with PTX3 at pH 7.4, consistent with our previous studies showing that, at this pH, PTX3 only associates with HC*HA complexes if they are formed in its presence. However, PTX3 binds to HC1 at acidic pH, and can also be incorporated into pre-formed HC*HA complexes under these conditions. This provides a novel mechanism for the regulation of PTX3-mediated HA crosslinking (e.g., during inflammation), likely mediated by a pH-dependent conformational change in HC1. The PTX3 octamer was found to associate simultaneously with up to eight HC1 molecules and, thus, has the potential to form a major crosslinking node within HC*HA matrices, i.e., where the physical and biochemical properties of resulting matrices could be tuned by the HC/PTX3 composition.

biochemistry↗

Evolution of SARS-CoV-2 spike trimers towards optimized heparan sulfate cross-linking and inter-chain mobility

The heparan sulfate (HS)-rich extracellular matrix (ECM) serves as an initial interaction site for the homotrimeric spike (S)-protein of SARS-CoV-2 to facilitate subsequent docking to angiotensin-converting enzyme 2 (ACE2) receptors and cellular infection. Recent variants of concern (VOCs), notably Omicron, have evolved by swapping several amino acids to positively charged residues to enhance the S-protein trimers interaction with the negatively charged HS polysaccharide chains in the matrix. These increased interactions, however, may reduce Omicrons ability to move through the HS-rich ECM to effectively find ACE2 receptors and infect cells, and raise the question of how HS-associated virus movement can be mechanistically explained. In this work, we show that Omicron S-proteins have evolved to balance HS interaction stability and dynamics, resulting in enhanced mobility on an HS-functionalized artificial matrix. Both properties are achieved by the ability of Omicrons S-proteins to cross-link at least two HS chains, providing both high avidity to retain the protein inside the HS-rich matrix, and fast dynamics, thus enabling direct S-protein switching between HS chains as a prerequisite for mobility at the cell surface. Optimized HS interactions can be targeted pharmaceutically, because an HS mimetic significantly suppressed surface binding and cellular infection specifically of the Omicron VOC. These findings suggest a robust way to interfere with SARS-CoV-2 Omicron infection and, potentially, future variants.

molecular biology↗

Optical sectioning for reflection interference microscopy

Reflection Interference Contrast Microscopy (RICM, also known as interference reflection microscopy) and related techniques have become of wide interest to the biophysical, soft matter and biochemistry communities owing to their exquisite sensitivity for characterising thin films or individual nanoscopic objects adsorbed onto surfaces, or for monitoring cell-substrate interactions. Over the recent years, striking progresses have been made to improve the sensitivity and the quantitative analysis of RICM. Its use in more complex environments, with spurious reflections stemming from a variety of structures in the sample, remains however challenging. In this paper, we demonstrate two optical sectioning methods that effectively reduce such background and can be readily implemented in a conventional RICM setup: line confocal detection, and structured illumination microscopy. We characterise experimentally the benefits to image quality and demonstrate the use of the methods for quantitative imaging of complex biological and biomimetic samples: cellular membranes, thin organic films, surface biofunctionalization. We then discuss the benefits of each method and provide guidelines to arbitrate between sectioning and signal-to-noise ratio. Finally, we provide a detailed description of our experimental setup and a home-written image acquisition and processing software that should allow the interested reader to duplicate such a setup on a home-built or commercial microscope.

biophysics↗

Competitive specific anchorage of molecules onto surfaces: quantitative control of grafting densities and contamination by free anchors

The formation of surfaces decorated with biomacromolecules such as proteins, glycans or nucleic acids with well-controlled orientations and densities is of critical importance for the design of in vitro models, e.g., synthetic cell membranes, and interaction assays. To this effect, ligand molecules are often functionalized with an anchor that specifically binds to a surface with a high density of binding sites, providing control over the presentation of the molecules. Here, we present a method to robustly and quantitatively control the surface density of one or several types of anchor-bearing molecules by tuning the relative concentrations of target molecules and free anchors in the incubation solution. We provide a theoretical background that relates incubation concentrations to the final surface density of the molecules of interest, and present effective guidelines towards optimizing incubation conditions for the quantitative control of surface densities. Focussing on the biotin anchor, a commonly used anchor for interaction studies, as a salient example, we experimentally demonstrate surface density control over a wide range of densities and target molecule sizes. Conversely, we show how the method can be adapted to quality control the purity of end-grafted biopolymers such as biotinylated glycosaminoglycans by quantifying the amount of residual free biotin reactant in the sample solution.

biophysics↗

Chemokine CXCL4 interactions with extracellular matrix proteoglycans mediate wide-spread non-receptor mediated immune cell recruitment

Leukocyte recruitment from the vasculature into tissues is a crucial component of the immune system, but is also key to inflammatory disease. Chemokines are central to this process but have yet to be therapeutically targeted during inflammation, due to a lack of mechanistic understanding. Specifically, CXCL4 (PF4) has no established receptor that explains its function. Here we use biophysical, in vitro and in vivo techniques to determine the mechanism underlying CXCL4 mediated leukocyte recruitment. We demonstrate that CXCL4 binds to glycosaminoglycan (GAG) sugars within the endothelial extracellular matrix resulting in increased vascular permeability and non-specific recruitment of a range of leukocytes. Furthermore, GAG sulphation confers selectivity onto chemokine localisation. These findings represent a new understanding of chemokine biology, providing novel mechanisms for future therapeutic targeting. One sentence summaryCXCL4 binds to extracellular matrix proteoglycans resulting in increased vascular permeability and recruitment of a wide range of different leukocytes via a non-canonical mechanism.

immunology↗

A quantitative method for sizing hyaluronan and other glycosaminoglycans on surfaces

Hyaluronan (HA) is a major component of peri- and extra-cellular matrices and plays important roles in many biological processes such as cell adhesion, proliferation and migration. The abundance, size distribution and presentation of HA dictate its biological effects and are also useful indicators of pathologies and disease progression. Methods to assess the molecular mass of free-floating HA and other glycosaminoglycans (GAGs) are well established. In many biological and technological settings, however, GAGs are displayed on surfaces, and methods to obtain the size of surface-attached GAGs are lacking. Here, we present a method to size HA that is end-attached to surfaces. The method is based on the quartz crystal microbalance with dissipation monitoring (QCM-D) and exploits that the softness and thickness of films of grafted HA increase with HA size. These two quantities are sensitively reflected by the ratio of the dissipation shift ({Delta}D) and the negative frequency shift (-{Delta}f) measured by QCM-D upon the formation of HA films. Using a series of size-defined HA preparations, ranging in size from [~]2 kDa tetrasaccharides to [~]1 MDa polysaccharides, we establish a monotonic yet non-linear standard curve of the {Delta}D/-{Delta}f ratio as a function of HA size, which reflects the distinct conformations adopted by grafted HA chains depending on their size and surface coverage. We demonstrate that the standard curve can be used to determine the mean size of HA, as well as other GAGs, such as chondroitin sulfate and heparan sulfate, of preparations of previously unknown size in the range from 1 to 500 kDa, with a resolution of better than 10%. For polydisperse samples, our analysis shows that the process of surface-grafting preferentially selects smaller GAG chains, and thus reduces the average size of GAGs that are immobilised on surfaces comparative to the original solution sample. Our results establish a quantitative method to size HA and other GAGs grafted on surfaces, and also highlight the importance of sizing GAGs directly on surfaces. The method should be useful for the development and quality control of GAG-based surface coatings in a wide range of research areas, from molecular interaction analysis to biomaterials coatings.

biophysics↗

Membrane binding controls ordered self-assembly of animal septins

Septins are conserved cytoskeletal proteins that regulate cell cortex mechanics. The mechanisms of their interactions with the plasma membrane remain poorly understood. Here we show by cell-free reconstitution that membrane binding requires electrostatic interactions of septins with anionic lipids and promotes the ordered self-assembly of fly septins into filamentous meshworks. Transmission electron microscopy reveals that both fly and mammalian septins form arrays of single and paired filaments. Atomic force microscopy and quartz crystal microbalance demonstrate that the fly filaments form mechanically rigid, 12 to 18 nm thick, double layers of septins. By contrast, C-terminally truncated septin mutants form 4 nm thin monolayers, indicating that stacking requires the C-terminal coiled coils on DSep2 and Pnut subunits. Our work shows that membrane binding is required for fly septins to form ordered arrays of single and paired filaments and provides new insights into the mechanisms by which septins may regulate cell surface mechanics.

cell biology↗

Semaphorin 3A binding to chondroitin sulfate E enhances the biological activity of the protein, and cross-links and rigidifies glycosaminoglycan matrices

Semaphorin 3A (Sema3A) is a secreted protein that signals to cells through binding to neuropilin and plexin receptors and provides neurons with guidance cues key for axon pathfinding, and also controls cell migration in several other biological systems. Sema3A interacts with glycosaminoglycans (GAGs), an interaction that could localize the protein within tissues and involves the C-terminal domain of the protein. This domain comprises several furin cleavage sites that are processed during secretion and in previous works have hampered recombinant production of full-length wild type Sema3A, and the biochemical analysis of Sema3A interaction with GAGs. In this work, we have developed a strategy to purify the full-length protein in high yield and identified two sequences in the C-terminal domain, KRDRKQRRQR and KKGRNRR, which confer to the protein sub nM affinity for chondroitin sulfate and heparan sulfate polysaccharides. Using chemically defined oligosaccharides and solid phase binding assays, we report that Sema3A recognizes a (GlcA-GalNAc4S6S)2 motif but not a (GlcA2S-GalNAc6S)2 motif and is thus highly specific for type E chondroitin sulfate. Functionally, we found that Sema3A rigidified CS-E films that mimic the GAG presentation within extracellular matrices (ECMs), suggesting that Sema3A may have a previously unidentified function to cross-link and thus stabilize GAG-rich ECMs. Finally, we demonstrated that the full-length Sema3A is more potent at inhibiting neurite outgrowth than the truncated or mutant forms that were previously purified and that the GAG binding sites are required to achieve full activity. The results suggest that Sema3A can rigidify and cross-link GAG matrices, implicating Sema3A could function as an extracellular matrix organizer in addition to binding to and signaling through its cognate cell surface receptors.

biochemistry↗

Single-molecule kinetics of pore assembly by the membrane attack complex

The membrane attack complex (MAC) is a hetero-oligomeric protein assembly that kills pathogens by perforating their cell envelopes. The MAC is formed by sequential assembly of soluble complement proteins C5b, C6, C7, C8 and C9, but little is known about the rate-limiting steps in this process. Here, we use rapid atomic force microscopy (AFM) imaging to show that MAC proteins oligomerize within the membrane, unlike structurally homologous bacterial pore-forming toxins. C5b6 interacts with the lipid bilayer prior to recruiting C7 and C8. We discover that incorporation of the first C9 is the kinetic bottleneck of MAC formation, after which rapid C9 oligomerization completes the pore. This defines the kinetic basis for MAC assembly and provides insight into how human cells are protected from bystander damage by the cell surface receptor CD59, which is offered a maximum temporal window to halt the assembly at the point of C9 insertion.

biophysics↗