Biology subjects

Raitor, M.

Publications and source records attributed to Raitor, M..

3 recordsLinked to original sources

bioRxiv2023

Frontal hip exoskeleton assistance does not appear promising for reducing the metabolic cost of walking: A preliminary experimental study

BackgroundDuring walking, humans exert a substantial hip abduction moment to maintain balance and prevent pelvic drop. This significant torque requirement suggests that assisting the frontal hip muscles could be a promising strategy to reduce the energy expenditure associated with walking. A previous musculoskeletal simulation study also predicted that providing hip abduction assistance through an exoskeleton could potentially result in a large reduction in whole-body metabolic rate. However, to date, no study has experimentally assessed the metabolic cost of walking with frontal hip assistance. MethodsIn this case study involving a single subject (N = 1), a tethered hip exoskeleton emulator was used to assess the feasibility of reducing metabolic expenditure through frontal-plane hip assistance. Human-in-the-loop optimization was conducted separately under torque and position control to determine energetically optimal assistance parameters for each control scheme. ResultsThe optimized profiles in both control schemes did not reduce metabolic rate compared to walking with assistance turned off. The optimal peak torque magnitude was found to be close to zero, suggesting that any hip abduction torque would increase metabolic rate. Both bio-inspired and simulation-inspired profiles substantially increased metabolic cost. ConclusionFrontal hip assistance does not appear to be promising in reducing the metabolic rate of walking. This could be attributed to the need for maintaining balance, as humans may refrain from relaxing certain muscles as a precaution against unexpected disturbances during walking. An investigation of different control architectures is needed to determine if frontal-plane hip assistance can yield successful results.

bioengineering↗

bioRxiv2023

AddBiomechanics: Automating model scaling, inverse kinematics, and inverse dynamics from human motion data through sequential optimization

Creating large-scale public datasets of human motion biomechanics could unlock data-driven breakthroughs in our understanding of human motion, neuromuscular diseases, and assistive devices. However, the manual effort currently required to process motion capture data and quantify the kinematics and dynamics of movement is costly and limits the collection and sharing of large-scale biomechanical datasets. We present a method, called AddBiomechanics, to automate and standardize the quantification of human movement dynamics from motion capture data. We use linear methods followed by a non-convex bilevel optimization to scale the body segments of a musculoskeletal model, register the locations of optical markers placed on an experimental subject to the markers on a musculoskeletal model, and compute body segment kinematics given trajectories of experimental markers during a motion. We then apply a linear method followed by another non-convex optimization to find body segment masses and fine tune kinematics to minimize residual forces given corresponding trajectories of ground reaction forces. The optimization approach requires approximately 3-5 minutes to determine a subjects skeleton dimensions and motion kinematics, and less than 30 minutes of computation to also determine dynamically consistent skeleton inertia properties and fine-tuned kinematics and kinetics, compared with about one day of manual work for a human expert. We used AddBiomechanics to automatically reconstruct joint angle and torque trajectories from previously published multi-activity datasets, achieving close correspondence to expert-calculated values, marker root-mean-square errors less than 2 cm, and residual force magnitudes smaller than 2% of peak external force. Finally, we confirmed that AddBiomechanics accurately reproduced joint kinematics and kinetics from synthetic walking data with low marker error and residual loads. We have published the algorithm as an open source cloud service at AddBiomechanics.org, which is available at no cost and asks that users agree to share processed and de-identified data with the community. As of this writing, hundreds of researchers have used the prototype tool to process and share about ten thousand motion files from about one thousand experimental subjects. Reducing the barriers to processing and sharing high-quality human motion biomechanics data will enable more people to use state-of-the-art biomechanical analysis, do so at lower cost, and share larger and more accurate datasets.

bioengineering↗

bioRxiv2022

Rapid bilevel optimization to concurrently solve musculoskeletal scaling, marker registration, and inverse kinematic problems for human motion reconstruction

Creating large-scale public datasets of human motion biomechanics could unlock data-driven breakthroughs in our understanding of human motion, neuromuscular diseases, and assistive devices. However, the manual effort currently required to process motion capture data is costly and limits the collection and sharing of large-scale biomechanical datasets. We present a method to automate and standardize motion capture data processing: bilevel optimization that is able to scale the body segments of a musculoskeletal model, register the locations of optical markers placed on an experimental subject to the markers on a musculoskeletal model, and compute body segment kinematics given trajectories of experimental markers during a motion. The optimization requires less than five minutes of computation to process a subjects motion capture data, compared with about one day of manual work for a human expert. On a sample of 34 trials of experimental data, the root-mean-square marker reconstruction error (RMSE) was 1.38 cm, approximately 40% lower than the 2.58 cm achieved manually by 3 experts. Optimization solutions reconstructed known joint angle trajectories from four diverse motion trials of synthetic data to an average of 0.79 degrees RMSE. We have published an open source cloud service at AddBiomechanics.org to process experimental motion capture data, which is available at no cost and asks that users agree to share processed and de-identified data with the community. Reducing the barriers to processing and sharing high-quality human motion biomechanics data will enable more people to engage in state-of-the-art biomechanical analysis in their work, do so at lower cost, and share larger and more accurate datasets. Author summaryCreating large-scale public datasets of human motion could unlock data-driven breakthroughs in our understanding of neuromuscular diseases, assistive devices, and human motion more broadly. The manual effort currently required to process these motion datasets is costly and limits the collection and sharing of large-scale datasets. Our cloud-based software tool, called AddBiomechanics, uses state-of-the-art optimization techniques to automatically scale the body segments of a musculoskeletal model to match the subject of interest, and then compute body segment kinematics during a motion. The optimization requires less than five minutes of computation to process a subjects motion capture data, compared with about one day of manual work for a human expert. The accuracy of the approach in quantifying the body segment kinematics is as good or better than the results achieved manually by experts. Reducing the barriers to processing and sharing high-quality human motion biomechanics data will enable more people to engage in state-of-the-art biomechanical analysis, do so at lower cost, and share larger and more accurate datasets.

physiology↗