Biology subjects

Qin, X.-H.

Publications and source records attributed to Qin, X.-H..

9 recordsLinked to original sources

bioRxiv2026

A Modular Synthetic Hydrogel with Cell-scale Micropores Modulates Osteocyte-like Morphogenesis and Osteogenic Differentiation In Vitro

One crucial step during early osteogenesis is the embedding of osteoblasts within a collagen-rich extracellular matrix (osteoid), where they subsequently differentiate into a functional network of osteocytes. However, reconstructing 3D osteocyte networks in vitro remains a major challenge. We recently developed a synthetic microporous hydrogel to support the in vitro culture of 3D bone cell networks. Although matrix biodegradability facilitates cell-material interactions, the influence of micropores on bone tissue morphogenesis and differentiation remains poorly understood. Here, we investigate the effect of cell-scale micropores on bone cell morphogenesis and osteogenic differentiation in vitro. By exploiting polymerization-induced phase separation (PIPS) between 4-arm polyethylene glycol vinyl sulfones and dextran in the presence of hyaluronan, we generated matrix metalloproteinase-sensitive hydrogels with cell-scale micropores. Increasing the dextran concentration enlarged the average pore size from 4 m to 8 m, accompanied by a slight decrease in mechanical stiffness. Following encapsulation within these hydrogels, primary human osteoblasts remained highly viable. Hydrogels with larger pores supported extensive 3D cell network formation, whereas hydrogels with smaller pores exhibited enhanced osteogenic differentiation following 21 days of osteogenic culture. Together, these findings highlight that bone cells are sensitive to microporous physical cues and even minor changes over pore sizes can make an impact on osteocyte-like morphogenesis and differentiation in vitro.

bioengineering↗

bioRxiv2025

Volumetric Bioprinting of Bone-like Mineralizing Hydrogel Constructs in the Presence of High Cell Densities and Mineral Precursors

A major challenge in bone tissue engineering is the embedding of osteocyte-like cells at high density within a mineralized matrix at the micro-scale and a trabecular-like architecture at the macro-scale. Volumetric bioprinting (VBP) enables rapid creation of complex cell-laden constructs through tomographic light projections. However, integrating both high cell densities and inorganic mineral precursors into VBP processes poses challenges due to light scattering, which can compromise print fidelity. In this study, we aim to combine bioinspired polymer-induced liquid-phase precursor (PILP) mineralization with VBP to fabricate cell-laden gelatin methacryloyl hydrogel constructs with amorphous mineral precursors. By stabilizing amorphous mineral precursors with poly-aspartic acid, light scattering is sufficiently reduced to enable printing. Tuning the refractive index of this mineralizing bioresin allows fast VBP of mineralized bone-like constructs with cell densities of up to 3 million cells ml-1. The constructs display high cell viability (>90%) and enhanced mineralization when cultured in osteogenic conditions with {beta}-glycerophosphate. Encapsulated human mesenchymal stromal cells exhibit an early osteocytic phenotype after 28 days of differentiation. Collectively, this PILP-assisted VBP platform holds promise for the development of advanced in vitro bone models with more physiologically relevant architecture and cellular composition.

bioengineering↗

bioRxiv2023

Dual carbon sequestration with photosynthetic living materials

Natural ecosystems offer efficient pathways for carbon sequestration, serving as a resilient approach to remove CO2 from the atmosphere with minimal environmental impact. However, the control of living systems outside of their native environments is often challenging. Here, we engineered a photosynthetic living material for dual CO2 sequestration by immobilizing photosynthetic microorganisms within a printable polymeric network. The carbon concentrating mechanism of the cyanobacteria enabled accumulation of CO2 within the cell, resulting in biomass production. Additionally, the metabolic production of OH- ions in the surrounding medium created an environment for the formation of insoluble carbonates via microbially-induced calcium carbonate precipitation (MICP). Digital design and fabrication of the living material ensured sufficient access to light and nutrient transport of the encapsulated cyanobacteria, which were essential for long-term viability (more than one year) as well as efficient photosynthesis and carbon sequestration. The photosynthetic living materials sequestered approximately 2.5 mg of CO2 per gram of hydrogel material over 30 days via dual carbon sequestration, with 2.2 {+/-} 0.9 mg stored as insoluble carbonates. Over an extended incubation period of 400 days, the living materials sequestered 26 {+/-} 7 mg of CO2 per gram of hydrogel material in the form of stable minerals. These findings highlight the potential of photosynthetic living materials for scalable carbon sequestration, carbon-neutral infrastructure, and green building materials. The simplicity of maintenance, coupled with its scalability nature, suggests broad applications of photosynthetic living materials as a complementary strategy to mitigate CO2 emissions.

bioengineering↗

bioRxiv2023

Synthetic Biodegradable Void-forming Hydrogels for In Vitro 3D Culture of Functional Human Bone Cell Networks

Generating 3D bone cell networks in vitro that accurately mimic the dynamic process of osteoblast embedding during early bone formation poses a significant challenge. Herein, we report a synthetic biodegradable macroporous hydrogel for efficient formation of 3D networks from human primary cells, analysis of cell-secreted extracellular matrix (ECM) and microfluidic integration. Using polymerization-induced phase separation, matrix metalloproteinase-sensitive polyethylene glycol hydrogels are formed with interconnected porosity in the presence of living cells. The pore size (5-20 m) and permeability can be fine-tuned by adjusting the concentration and molecular weight of dextran. After encapsulation in these hydrogels, human mesenchymal stem cells and osteoblasts form a 3D cell network within 24 hours. The synthetic nature of this hydrogel enables histological analysis of cell-secreted collagen, a task previously challenging using collagen-derived hydrogels. Moreover, this hydrogel is integrated with a commercial chip, showcasing the potential for microfluidic perfusion cultures. Time-lapsed imaging of fluid flow and fast formation of 3D cell networks is demonstrated on chip. Altogether, this work introduces a versatile synthetic macroporous hydrogel, which can be integrated with microfluidic chip to enable 3D culture of human bone cell networks and analysis of cell-secreted ECM. This hydrogel may facilitate future mechanistic studies on bone development.

bioengineering↗

bioRxiv2022

A Synthetic Stress-relaxing Photoresin for Ultrafast Volumetric Bioprinting

Tomographic volumetric bioprinting (VBP) enables fast photofabrication of cell-laden hydrogel constructs in one step, addressing the limitations of conventional layer-by-layer additive manufacturing. However, existing biomaterials that fulfill the physicochemical requirements of VBP are limited to gelatin-based photoresins of high polymer concentrations. The printed microenvironments are predominantly static and stiff, lacking sufficient capacity to support 3D cell growth. We here report a dynamic resin based on thiol-ene photo-clickable polyvinyl alcohol (PVA) and thermo-sensitive sacrificial gelatin for fast VBP of functional ultrasoft cell-laden hydrogel constructs within 7-15 seconds. Using gelatin allows VBP of permissive hydrogels with low PVA contents of 1.5%, providing a stress-relaxing environment for fast cell spreading, 3D osteogenic differentiation of embedded human mesenchymal stem cells and matrix mineralization. Additionally, site-specific immobilization of molecules-of-interest inside a PVA hydrogel is achieved by 4D tomographic thiol-ene photopatterning. This technique may enable spatiotemporal control of cell-material interactions and guided in vitro tissue formation using programmed cell-friendly light. Altogether, this study introduces a synthetic dynamic photoresin enabling fast VBP of functional ultrasoft hydrogel constructs with well-defined physicochemical properties and high efficiency.

bioengineering↗

bioRxiv2022

A Phase-separating Thiol-ene Photoresin for Volumetric Bioprinting of Macroporous Hydrogels

Macroporous scaffolds facilitate solute transport and cell-cell communication, but materials allowing for in situ pore formation and 3D printing in aqueous solutions are scarce. Here, we introduce an efficient thiol-ene photoclick resin for light-assisted fabrication of cell-compatible macroporous hydrogels via photopolymerization-induced phase separation (PIPS). This resin consists of norbornene-functionalized polyvinyl alcohol, di-thiol crosslinker and dextran sulfate, which can rapidly form a hydrogel with interconnected pores by PIPS. The pore size is tunable in the range of 2-40 m as a function of light intensity, polymer composition and molecular charge. Unlike conventional methods to porous materials, PIPS uniquely allows in situ pore formation in the presence of living cells, thereby enabling 3D cell culture and bioprinting applications. We demonstrate fast 3D photoencapsulation of living cells, enhanced cell spreading in macroporous hydrogels, and tomographic volumetric bioprinting of cm-scale hydrogel constructs with hierarchical pores within 20 seconds. Collectively, this resin is cell-compatible, low-cost, easy-to-make and highly efficient for PIPS, offering promises for fast photofabrication of living tissues with complex porous structures.

bioengineering↗

bioRxiv2021

Volumetric Tomographic 3D Bioprinting of Heterocellular Bone-like Tissues in Seconds

Tomographic volumetric bioprinting (VBP) has recently emerged as a powerful tool for rapid solidification of cell-laden hydrogel constructs within seconds. However, its practical applications in tissue engineering requires a detailed understanding of how different printing parameters (concentration of resins, laser dose) affect cell activity and tissue formation. Herein, we explore a new application of VBP in bone tissue engineering by merging a soft gelatin methacryloyl (GelMA) bioresin (<5 kPa) with 3D endothelial co-culture to generate heterocellular bone-like constructs with enhanced functionality. To this, a series of bioresins with varying concentrations of GelMA and lithium Phenyl(2,4,6-trimethylbenzoyl)phosphinate (LAP) photoinitiator were formulated and characterized in terms of photo-reactivity, printability and cell-compatibility. A bioresin with 5% GelMA and 0.05% LAP was identified as the optimal formulation for VBP of complex perfusable constructs within 30 s at high cell viability (>90%). The fidelity was validated by micro-computed tomography and confocal microscopy. Compared to 10% GelMA, this bioresin provided a softer and more permissive environment for osteogenic differentiation of human mesenchymal stem cells (hMSCs). The expression of osteoblastic markers (collagen-I, ALP, osteocalcin) and osteocytic markers (podoplanin, Dmp1) was monitored for 42 days. After 21 days, early osteocytic markers were significantly increased in 3D co-cultures with human umbilical vein endothelial cells (HUVECs). Additionally, we demonstrate VBP of a perfusable, pre-vascularized model where HUVECs self-organized into an endothelium-lined channel. Altogether, this work leverages the benefits of VBP and 3D co-culture, offering a promising platform for fast scaled biofabrication of 3D bone-like tissues with unprecedented functionality. Graphical abstract O_FIG O_LINKSMALLFIG WIDTH=200 HEIGHT=109 SRC="FIGDIR/small/468504v4_ufig1.gif" ALT="Figure 1"> View larger version (34K): org.highwire.dtl.DTLVardef@1294740org.highwire.dtl.DTLVardef@104d811org.highwire.dtl.DTLVardef@105677dorg.highwire.dtl.DTLVardef@1cd60e4_HPS_FORMAT_FIGEXP M_FIG C_FIG Statement of significanceThis study explores new strategies for ultrafast bio-manufacturing of bone tissue models by leveraging the advantages of tomographic volumetric bioprinting (VBP) and endothelial co-culture. After screening the properties of a series of photocurable gelatin methacryloyl (GelMA) bioresins, a formulation with 5% GelMA was identified with optimal printability and permissiveness for osteogenic differentiation of human mesenchymal stem cells (hMSC). We then established 3D endothelial co-cultures to test if the heterocellular interactions may enhance the osteogenic differentiation in the printed environments. This hypothesis was evidenced by increased gene expression of early osteocytic markers in 3D co-cultures after 21 days. Finally, VBP of a perfusable cell-laden tissue construct is demonstrated for future applications in vascularized tissue engineering.

bioengineering↗

bioRxiv2020

Functionalized bead assay to measure 3-dimensional traction forces during T-cell activation

When T-cells probe their environment for antigens, the bond between the T-cell receptor (TCR) and the peptide-loaded major histocompatibility complex (MHC) is put under tension, thereby influencing the antigen discrimination process. Yet, the quantification of such forces in the context of T-cell signaling is technically challenging. Common approaches such as traction force microscopy (TFM) employ a global readout of the force fields, e.g. by measuring the displacements of hydrogel-embedded marker beads. Recent data, however, indicated that T-cells exert tensile forces locally via TCR-enriched microvilli while scanning the surface of antigen-presenting cells. Here, we developed a traction force microscopy platform, which allows for quantifying the pulls exerted via T-cell microvilli, in both tangential and normal directions, during T-cell activation. For this, we immobilized specific T-cell activating antibodies directly on the marker beads used to read out the hydrogel deformation. Microvilli targeted the functionalized beads, as confirmed by superresolution microscopy of the local actin organization. Moreover, we found that cellular components, such as actin, TCR and CD45 reorganize upon interaction with the beads, such that actin forms a vortex-like ring structure around the beads and TCR is enriched at the bead surface, whereas, CD45 is excluded from bead-microvilli contacts. Significance statementDuring the antigen recognition process, T-cells explore and probe their environment via microvilli, which exert local pushes and pulls at the surface of the antigen presenting cell. It is currently believed that these forces influence or even enable the antigen recognition process. Here, we describe the development of a platform, which allows us to quantify the magnitude and direction of traction forces exerted locally by T cell microvilli. Simultaneous Ca2+ imaging was used to link the measured forces to the overall T cell activation status. Superresolution microscopy resolved the contact sites of bead-microvilli contact at the nanoscale: cells contacted beads via actin vortex-like structures, which excluded the phosphatase CD45 from the contacts.

biophysics↗

bioRxiv2020

3D Bioprinting of Graphene Oxide-Incorporated Cell-laden Bone Mimicking Scaffolds for Promoting Scaffold Fidelity, Osteogenic Differentiation and Mineralization

Bioprinting is a promising technique for facilitating the fabrication of engineered bone tissues for patient-specific defect repair and for developing in vitro tissue/organ models for ex vivo tests. However, polymer-based ink materials often result in insufficient mechanical strength, low scaffold fidelity and loss of osteogenesis induction because of the intrinsic swelling/shrinking and bioinert properties of most polymeric hydrogels. In this work, we developed a novel human mesenchymal stem cell (hMSC)-laden graphene oxide (GO)/alginate/gelatin composite bioink to form 3D bone mimicking scaffolds. Our results showed that the GO composite bioinks with higher GO concentrations improved the bioprintability, scaffold fidelity, compressive modulus and cell viability. The higher GO concentration increased the cell body size and DNA content. The 1GO group had the highest osteogenic differentiation of hMSC with the upregulation of osteogenic-related gene expression at day 42. To mimic critical-sized calvarial bone defects in mice, 3D cell-laden GO defect scaffolds with complex geometries were successfully bioprinted. 1GO maintained the best scaffold fidelity and had the highest mineral volume after culturing in the bioreactor for 42 days. Finally, the 1GO bioink has been demonstrated great potential for 3D bioprinting in applications of bone model and bone tissue engineering.

bioengineering↗