Biology subjects

Puech, P.-H.

Publications and source records attributed to Puech, P.-H..

10 recordsLinked to original sources

bioRxiv2026

Multiscale oocyst wall mechanics govern coccidian resistance

Coccidian parasites spread through oocysts, environmental transmission stages that must survive harsh conditions yet rupture on cue inside the host to release infectious sporozoites. How the oocyst wall reconciles these opposing demands is unknown. Using single-oocyst microindentation, quantitative imaging and infection assays in Eimeria acervulina and Eimeria tenella, we show that the bilayered wall is functionally partitioned: the chemically fragile outer layer is mechanically dispensable, while the inner layer bears the mechanical load and remains impermeable to macromolecules and limiting osmotic exchange even after the outer layer is stripped. Oocysts behave as pressurised shells that fail preferentially at the anterior pole, a fixed mechanical weak point that channels sporocyst release regardless of where force is applied. Wall structure, autofluorescence, mechanics and infectivity prove dissociable: bleach removes the outer layer without weakening the wall or fully abolishing infectivity, whereas heat weakens the wall and abolishes infectivity while leaving the bilayered structure intact. These findings define a mechanical logic for coccidian oocyst resistance, disinfection and controlled excystation, and identify the inner wall as the critical target for inactivating environmentally transmitted parasites.

microbiology↗

bioRxiv2025

Stiffening cells with light

Fluorescence microscopy is widely used to observe structures and dynamic processes in living cells and organisms and is often used as if it were purely innocuous to the cells or structures of interest. However, it can lead to phototoxicity, which can affect the cellular behavior and lead to erroneous interpretations of the observations. The major cause of cell damage through phototoxicity is the production of reactive oxygen species (ROS), which can form crosslinks between intracellular molecules, including proteins and nucleic acids. By using profile microindentation and atomic force microscopy, we demonstrate that the excitation of various fluorescent probes leads to a large increase in the stiffness of several cell types within seconds of illumination. The stiffening exhibits a dose-dependent response, where longer exposure times to exciting light are correlated with larger stiffening. This photostiffening effect explains why T cells loaded with the Fluo-4 Calcium probe stop emitting a protrusion within seconds after the excitation light is turned on. We observed photostiffening in different cell types and fluorophores. We showed that repeated cell indentation alone led to cell stiffening as well as excitation with blue or UV light in the absence of a fluoroph ore. However, in the latter case, the stiffening was much smaller than that when the fluorophore was excited. We used both sharp and blunt indenters to show that stiffening occurred not only at the cell cortex level but also deeper in the cell interior and that photostiffening is independent of actin cytoskeleton organization. We correlated the increase in cell stiffness with the production of intracellular reactive oxygen species and reproduced cell stiffening by incubating cells with a ROS inducer, H2O2. The excitation of the photosensitizer Pheophorbide a, which induces a specific type of reactive oxygen species, namely singlet oxygen, also led to cell stiffening. This study reminds the experimentalists that it is crucial to perform controls when using fluorescence. It further allows us to propose exploiting photostiffening as a new method for rapidly quantifying phototoxicity. SignificanceThis study reveals a direct relationship between fluorescence excitation and cell mechanical properties. The generality of th is phenomenon across diverse fluorophores and cell types highlights the importance of controlling phototoxicity in fluorescence experiments, in particular in complex, quantitative cell biology and biophysical experiments, but also reveals an unexpected rol e of intracellular reactive oxygen species production and identifies cell stiffness as a proxy for assessing the efficacy of photodynamic therapy.

biophysics↗

bioRxiv2025

AFM-based nanoscale characterization of physical interaction within hematopoietic stem cells niche at single-cell level

Hematopoietic stem cells (HSCs) produce all blood cells throughout the lifespan of the organism. HSC requires a specialized bone marrow microenvironment, known as the niche, for proper differentiation and self-renewal. While several molecular and cellular elements of the niche are described, the precise understanding of the mechanobiology underlying HSC adhesion to the niche remains poorly understood. Here, we aim to characterize physical interactions and adhesion within the hematopoietic niche by combining cell sorting, surface functionalization, and atomic force microscopy. Using this approach, we quantified and compared the adhesion of bone marrow (BM) mesenchymal stromal cells (MSCs) to different extracellular proteins, as well as the adhesion of HSCs to MSCs. We observed that MSCs adhere with the greatest force to fibronectin in an Arg-Gly-As (RGD) motif mediated and actin cytoskeleton-dependent manner. Additionally, we showed that HSCs strongly adhere to MSC within 30 seconds and that the binding is RGD-independent. In conclusion, we demonstrated how to implement atomic force microscopy to measure the physiological interactions within the HSCs niche in a direct, specific, and quantitative way. This approach provides a more comprehensive and precise characterization of the biology of the HSC niche compared to previously used methods. Furthermore, it highlights the complexity of studying extremely small structures and rare cell populations in biophysical experiments.

cell biology↗

bioRxiv2024

Decoupling individual host response and immune cell engager cytotoxic potency

Immune cell engagers are molecular agents, usually antibody-based constructs, engineered to recruit immune cells against cancer cells and kill them. They represent a versatile and powerful tool for cancer immunotherapy. Despite the multiplication of new engagers tested and accepted in the clinics, how molecular and cellular parameters influence their action is poorly understood. In particular, disentangling the respective role of host immune cells and engager biophysical characteristics is needed to improve their design and efficiency. Focusing here on harnessing antibody dependent Natural Killer cell cytotoxicity, we measure the efficiency of 6 original bispecific antibodies (bsAb), associating an anti-HER2 nanobody and an anti-CD16 nanobody. In vitro cytotoxicity data using primary human NK cells on different target cell lines exposing different antigen densities were collected, exhibiting a wide range of bsAb dose response. In order to rationalize our observations, we introduce a simple multiscale model, postulating that the density of bsAb bridging the two cells is the main parameter triggering the cytotoxic response. We introduce two new microscopic parameters: the surface cooperativity describing bsAb affinity at the bridging step and the threshold of bridge density determining the donor-dependent response. Both parameters permit to rank Abs and donors and to predict bsAb potency as a function of antibodies bulk affinities and receptor surface densities on cells. Our approach thus provides a general way to decouple donor response from immune engagers characteristics, rationalizing the landscape of molecule design.

biophysics↗

bioRxiv2022

Probing mechanical interaction of immune receptors and cytoskeleton by membrane nanotube extraction

The role of force application in immune cell recognition is now well established, the force being transmitted between the actin cytoskeleton to the anchoring ligands through receptors such as integrins. In this chain, the mechanics of the cytoskeleton to receptor link, though clearly crucial, remains poorly understood. To probe this link, we combine mechanical extraction of membrane tubes from T cells using optical tweezers, and fitting of the resulting force curves with a viscoelastic model taking into account the cell and relevant molecules. We solicit this link using four different antibodies against various membrane bound receptors: antiCD3 to target the T Cell Receptor (TCR) complex, antiCD45 for the long sugar CD45, and two clones of antiCD11 targeting open or closed conformation of LFA1 integrins. Upon disruption of the cytoskeleton, the stiffness of the link changes for two of the receptors, exposing the existence of a receptor to cytoskeleton link - namely TCR-complex and open LFA1, and does not change for the other two where no such a link was expected. Our integrated approach allows us to probe, for the first time, the mechanics of the intracellular receptor-cytoskeleton link in immune cells.

biophysics↗

bioRxiv2022

Cellular forces during early spreading of T lymphocytes on ultra-soft substrates

Mechanical forces are increasingly recognized as critical regulators of T cell activation, yet their earliest dynamics remain poorly resolved. Here, we use traction force microscopy on ultra-soft, antigen-presenting-cell-like polyacrylamide substrates to quantify the first 15 minutes of force generation by Jurkat and primary human CD4 T cells under controlled activating conditions. By combining time-resolved stress mapping with spatial tensor analysis, we uncover previously unrecognized heterogeneity in early T cell mechanosensing. Rather than producing a single stereotyped mechanical response, T cells exhibit three distinct temporal force regimes: low-amplitude active fluctuations, intermittent force bursts, and sustained sigmoidal buildups of stress. These temporal programs tightly couple to spatial organization: fluctuating and intermittent behaviors associate with disordered stress distributions, whereas sustained sigmoidal responses predominantly accompany polarized, dipolar, and unexpectedly extensile stress patterns. Substrate stiffness strongly reshapes this distribution, with stiffer gels suppressing sustained high-energy responses and biasing cells toward fragmented mechanical engagement. Primary T cell subsets likewise display distinct force phenotypes: naive cells exhibit weak, fluctuating behaviors, whereas memory cells more readily enter sustained high-force states. Together, these findings support a two-stage model of early T cell mechanosensing in which filopodia-mediated probing generates low, intermittent forces that, upon sustained engagement, transition to a lamellipodia-driven spreading phase producing larger, persistent, and predominantly outward-directed stresses. This framework provides a mechanistic explanation for how substrate mechanics, receptor context, and immune cell state shape force generation during the earliest stages of activation. More broadly, our results identify force as a dynamic and structured component of antigen recognition rather than a passive consequence of T cell signaling. Graphical abstract O_FIG O_LINKSMALLFIG WIDTH=200 HEIGHT=130 SRC="FIGDIR/small/480084v4_ufig1.gif" ALT="Figure 1"> View larger version (34K): org.highwire.dtl.DTLVardef@29e24dorg.highwire.dtl.DTLVardef@1c8399forg.highwire.dtl.DTLVardef@3f29edorg.highwire.dtl.DTLVardef@d9a581_HPS_FORMAT_FIGEXP M_FIG C_FIG

biophysics↗

bioRxiv2020

Controlling T cells shape, mechanics and activation by micropatterning.

We designed a strategy, based on a careful examination of the activation capabilities of proteins and antibodies used as substrates for adhering T cells, coupled to protein microstamping. This allowed us to control at the same time the position, shape, mechanics and activation state of T cells. Once adhered on shaped patterns we examined the capacities of T cells to be activated with soluble aCD3, in comparison to T cells adhered to a continuously decorated substrate with the same density of ligands. We show that, in our hand, adhering onto an anti CD45 (aCD45) antibody decorated surface is not affecting T cell calcium fluxes, even adhered on variable size micro-patterns. We further demonstrate this by expressing MEGF10 as a non immune adhesion receptor in T cells to obtain the very same spreading area on PLL substrates and Young modulus than immobilized cells on aCD45, while retaining similar activation capabilities using soluble aCD3 or through model APC contacts. We propose that our system is a way to test activation or anergy of T cells with defined adhesion and mechanical characteristics, and may allow to dissect fine details of these mechanisms since it allows to observe homogenised populations in standardized T cell activation assays.

biophysics↗

bioRxiv2019

iASPP contributes to cortex rigidity, astral microtubule capture and mitotic spindle positioning

The microtubule plus-end binding protein EB1 is the core of a complex protein network which regulates microtubule dynamics during important biological processes such as cell motility and mitosis. We found that iASPP, an inhibitor of p53 and predicted regulatory subunit of the PP1 phosphatase, associates with EB1 at microtubule plus-ends via a SxIP motif. iASPP silencing or mutation of the SxIP motif led to defective microtubule capture at the leading edge of migrating cells, and at the cortex of mitotic cells leading to abnormal positioning of the mitotic spindle. These effects were recapitulated by the knockdown of Myosin-Ic (Myo1c), identified as a novel partner of iASPP. Moreover, iASPP or Myo1c knockdown cells failed to round up during mitosis because of defective cortical rigidity. We propose that iASPP, together with EB1 and Myo1c, contributes to mitotic cell cortex rigidity, allowing astral microtubule capture and appropriate positioning of the mitotic spindle.

cell biology↗

bioRxiv2019

Single-cell immuno-mechanics: rapid viscoelastic changes are a hallmark of early leukocyte activation.

To accomplish their critical task of removing infected cells and fighting pathogens, leukocytes activate by forming specialized interfaces with other cells. Using an innovative micropipette rheometer, we show in three different cell types that when stimulated by microbeads mimicking target cells, leukocytes become up to ten times stiffer and more viscous. These mechanical changes initiate within seconds after contact and evolve rapidly over minutes. Remarkably, leukocyte elastic and viscous properties evolve in parallel, preserving a well-defined ratio that constitutes a mechanical signature specific to each cell type. The current results indicate that simultaneously tracking both elastic and viscous properties during an active cell process provides a new way to investigate cell mechanical processes. Our findings also suggest that dynamic immuno-mechanical measurements provide an identifier of leukocyte type and an indicator of the cells state of activation.

biophysics↗

bioRxiv2017

Biphasic mechanosensitivity of TCR mediated adhesion of T lymphocytes

Force sensitivity of the T cell receptor (TCR) is now believed to be essential for immune recognition, but cellular mechanosensitivity of T cells is still poorly understood. Here we show that T cells adhering via the TCR-complex respond to environmental stiffness in an unusual biphasic fashion. As the stiffness increases, adhesion and spreading first increase, then decrease, attaining their maximal values on an optimally stiff surface, with stiffness comparable to certain antigen presenting cells. Remarkably, in presence of additional ligands for the integrin LFA-1, spreading increases monotonously with stiffness up to a saturation value. Using a mesoscopic semi-analytical model linking spreading to molecular characteristics of bonds, we identify force sensitivity of the off-rate and the effective bond stiffness as the crucial parameters that determine monotonic or biphasic mechanosensitive behavior.

biophysics↗