Biology subjects

Peyton, S.

Publications and source records attributed to Peyton, S..

14 recordsLinked to original sources

bioRxiv2022

Live Cell Lineage Tracing of Dormant Cancer Cells

Breast cancer is a leading cause of global cancer-related deaths, and metastasis is the overwhelming culprit of poor patient prognosis. The most nefarious aspect of metastasis is dormancy, a prolonged period between primary tumor resection and relapse. Current therapies are insufficient at killing dormant cells; thus, they can remain quiescent in the body for decades until eventually undergoing a phenotypic switch, resulting in metastases that are more adaptable and more drug resistant. Unfortunately, dormancy has few in vitro models, largely because lab-derived cell lines are highly proliferative. Existing models address tumor dormancy, not cellular dormancy, because tracking individual cells is technically challenging. To combat this problem, we adapted a live cell lineage approach to find and track individual dormant cells, distinguishing them from proliferative and dying cells over multiple days. We applied this approach across a range of different in vitro microenvironments. Our approach revealed that the proportion of cells that exhibited long-term quiescence was regulated by both cell intrinsic and extrinsic factors, with the most dormant cells found in 3D collagen gels. We hope this approach will prove useful to biologists and bioengineers in the dormancy community to identify, quantify, and study dormant tumor cells. O_FIG O_LINKSMALLFIG WIDTH=200 HEIGHT=173 SRC="FIGDIR/small/511405v1_ufig1.gif" ALT="Figure 1"> View larger version (52K): org.highwire.dtl.DTLVardef@5d0af9org.highwire.dtl.DTLVardef@7b7830org.highwire.dtl.DTLVardef@f9fc4org.highwire.dtl.DTLVardef@1c20a39_HPS_FORMAT_FIGEXP M_FIG C_FIG

bioengineering↗

bioRxiv2022

Cavitation Induced Fracture of Intact Brain Tissue

Nonpenetrating traumatic brain injuries (TBI) are linked to cavitation. The structural organization of the brain makes it particularly susceptible to tears and fractures from these cavitation events, but limitations in existing characterization methods make it difficult to understand the relationship between fracture and cavitation in this tissue. More broadly, fracture energy is an important, yet often overlooked, mechanical property of all soft tissues. We combined needle-induced cavitation (NIC) with hydraulic fracture models to induce and quantify fracture in intact brains at precise locations. We report here the first measurements of the fracture energy of intact brain tissue that range from 1.5 to 8.9 J/m2, depending on the location in the brain and the model applied. We observed that fracture consistently occurs along interfaces between regions of brain tissue. These fractures along interfaces allow cavitation-related damage to propagate several millimeters away from the initial injury site. Quantifying the forces necessary to fracture brain and other soft tissues is critical for understanding how impact and blast waves damage tissue in vivo and has implications for the design of protective gear and tissue engineering. SignificanceMild injuries associated with concussion and blast waves cause tearing of brain tissue, which leads to traumatic brain injury (TBI). TBI is a leading cause of death and disability among children and young adults in the U.S., with 1.5 million Americans reporting a TBI each year. We introduce a novel approach to visualize these tears in intact brain tissue, and report the energies associated with brain fracture. Quantifying the fracture energy of brain, as we have done here, is critical to understand the forces from injury that lead to TBI.

bioengineering↗

bioRxiv2019

Control of Astrocyte Quiescence and Activation in a Synthetic Brain Hydrogel

Bioengineers designed numerous instructive brain extracellular matrix (ECM) environments that have tailored and tunable protein composition and biomechanics in vitro to study astrocyte reactivity during trauma and inflammation. However, a major limitation of both protein-based and model microenvironments is that astrocytes within fail to retain their characteristic stellate morphology and quiescent state without becoming activated under \"normal\" culture conditions. Here we introduce a synthetic hydrogel, that for the first time demonstrates maintenance of astrocyte quiescence, and control over activation on demand. With this synthetic brain hydrogel, we show the brain-specific integrin-binding and matrix metalloprotease (MMP)-degradable domains of proteins control astrocyte star-shaped morphologies, and we can achieve an ECM condition that maintains astrocyte quiescence with minimal activation. In addition, we can induce activation in a dose-dependent manner via both defined cytokine cocktails and low molecular weight hyaluronic acid. We envision this synthetic brain hydrogel as a new tool to study the physiological role of astrocytes in health and disease.

bioengineering↗

bioRxiv2019

Tumor cell-organized fibronectin is required to maintain a dormant breast cancer population

Tumors can undergo long periods of dormancy, with cancer cells entering a largely quiescent, non-proliferative state before reactivation and outgrowth. For a patient, these post-remission tumors are often drug resistant and highly aggressive, resulting in poor prognosis. To understand the role of the extracellular matrix (ECM) in regulating tumor dormancy, we created an in vitro cell culture system that combines carefully controlled ECM substrates with nutrient deprivation to observe entrance into and exit from dormancy with live imaging. We saw that cell populations capable of surviving entrance into long-term dormancy were heterogeneous, containing quiescent, cell cycle arrested, and actively proliferating cells. Cell populations that endured extended periods of serum-deprivation-induced dormancy formed an organized, fibrillar fibronectin matrix via v{beta}3 and 5{beta}1 integrin adhesion, ROCK-generated tension, and TGF{beta}2 stimulation. We surmised that the fibronectin matrix was primarily a mediator of cell survival, not proliferation, during the serum-deprivation stress, bacause cancer cell outgrowth after dormancy required MMP-2-mediated fibronectin degradation. Given the difficulty of animal models in observing entrance and exit from dormancy in real-time, we propose this approach as a new, in vitro method to study factors important in regulating dormancy, and we used it here to elucidate a role for fibronectin deposition and MMP activation.

cancer biology↗

bioRxiv2019

2D or 3D? How in vitro cell motility is conserved across dimensions, and predicts in vivo invasion

Cell motility is a critical aspect of wound healing, the immune response, and is deregulated in cancer. Current limitations in imaging tools make it difficult to study cell migration in vivo. To overcome this, and to identify drivers from the microenvironment that regulate cell migration, bioengineers have developed 2D and 3D tissue model systems in which to study cell motility in vitro, with the aim of mimicking the environments in which cells move in vivo. However, there has been no systematic study to explicitly relate and compare cell motility measurements between these geometries/systems. Here, we provide such analysis on our own data, as well as across data in existing literature to understand whether, and which, in vitro models are predictive of in vivo cell motility. To our surprise, many metrics of cell movement on 2D surfaces significantly and positively correlate with cell migration in 3D environments, and cell invasion in 3D is negatively correlated with glioblastoma invasion in vivo. Finally, to best compare across complex model systems, in vivo data, and data from different labs, we suggest that groups report an effect size, a statistical tool that is most translatable across experiments and labs, when conducting experiments that affect cellular motility.

bioengineering↗

bioRxiv2019

An omentum-inspired 3D PEG hydrogel for identifying ECM drivers of drug resistant ovarian cancer

Ovarian cancer (OvCa) is a challenging disease to treat due to poor screening techniques and late diagnosis. There is an urgent need for additional therapy options, as patients recur in 70% of cases. The limited availability of clinical treatment options could be a result of poor predictions in early stage drug screens on standard tissue culture polystyrene (TCPS). TCPS does not capture the mechanical and biochemical cues that cells experience in vivo, which can impact how cells will respond to a drug. Therefore, an in vitro model that captures some of the microenvironment features that the cells experience in vivo could provide better insights into drug response. In this study, we formed 3D multicellular tumor spheroids (MCTS) in microwells, and encapsulated them in 3D omentum-inspired hydrogels. SKOV-3 MCTS were resistant to Paclitaxel in our 3D hydrogels compared to a monolayer on TCPS. Toward clinical application, we tested cells from patients (ovarian carcinoma ascites spheroids (OCAS)), and drug responses predicted by using the 3D omentum-inspired hydrogels correlated with the reported pathology reports of those same patients. Additionally, we observed the presence of collagen production around the encapsulated SKOV-3 MCTS, but not on TCPS. Our results demonstrated that our 3D omentum-inspired hydrogel is an improved in vitro drug testing platform to study OvCa drug response for patient-derived cells, and helped us identify collagen 3 as a potential driver of Paclitaxel resistance.

bioengineering↗

bioRxiv2018

Applicability of Drug Response Metrics for Cancer Studies using Biomaterials

Bioengineers have built increasingly sophisticated models of the tumor microenvironment in which to study cell-cell interactions, mechanisms of cancer growth and metastasis, and to test new potential therapies. These models allow researchers to culture cells in conditions that include features of the in vivo tumor microenvironment (TME) implicated in regulating cancer progression, such as ECM stiffness, integrin binding to the ECM, immune and stromal cells, growth factor and cytokine depots, and a 3D geometry more representative of the TME than tissue culture polystyrene (TCPS). These biomaterials could be particularly useful for drug screening applications to make better predictions of efficacy, offering better translation to preclinical in vivo models and clinical trials. However, it can be challenging to compare drug response reports across different platforms and conditions in the current literature. This is, in part, as a result of inconsistent reporting and use of drug response metrics, and vast differences in cell growth rates across a large variety of biomaterial design. This perspective paper attempts to clarify the definitions of drug response measurements used in the field, and presents examples in which these measurements can and cannot be applied. We suggest as best practice to include appropriate controls, always measure the growth rate of cells in the absence of drug, and follow our provided \"decision tree\" matrix when reporting drug response metrics.

bioengineering↗

bioRxiv2018

A synthetic, three-dimensional bone marrow hydrogel

Three-dimensional (3D) synthetic hydrogels have recently emerged as desirable in vitro cell culture platforms capable of representing the extracellular geometry, elasticity, and water content of tissue in a tunable fashion. However, they are critically limited in their biological functionality. Hydrogels are typically decorated with a scant 1-3 peptide moieties to direct cell behavior, which vastly underrepresents the proteins found in the extracellular matrix (ECM) of real tissues. Further, peptides chosen are ubiquitous in ECM, and are not derived from specific proteins. We developed an approach to incorporate the protein complexity of specific tissues into the design of biomaterials, and created a hydrogel with the elasticity of marrow, and 20 marrow-specific cell-instructive peptides. Compared to generic PEG hydrogels, our marrow-inspired hydrogel improves stem cell differentiation and proliferation. We propose this tissue-centric approach as the next generation of 3D hydrogel design for applications in tissue engineering.

bioengineering↗

bioRxiv2018

Cross-Platform Mechanical Characterization of Lung Tissue

Published data on the mechanical strength and elasticity of lung tissue is widely variable, primarily due to differences in how testing was conducted across individual studies. This makes it extremely difficult to find a benchmark modulus of lung tissue when designing synthetic extracellular matrices (ECMs). To address this issue, we tested tissues from various areas of the lung using multiple characterization techniques, including micro-indentation, small amplitude oscillatory shear (SAOS), uniaxial tension, and cavitation rheology. We report the sample preparation required and data obtainable across these unique but complimentary methods to quantify the modulus of lung tissue. We highlight cavitation rheology as a new method, which can measure the modulus of intact tissue with precise spatial control, and reports a modulus on the length scale of typical tissue heterogeneities. Shear rheology, uniaxial, and indentation testing require heavy sample manipulation and destruction; however, cavitation rheology can be performed in situ across nearly all areas of the lung with minimal preparation. The Youngs modulus of bulk lung tissue using microindentation (1.9{+/-}0.5 kPa), SAOS (3.2{+/-}0.6 kPa), uniaxial testing (3.4{+/-}0.4 kPa), and cavitation rheology (6.1{+/-}1.6 kPa) were within the same order of magnitude, with higher values consistently reported from cavitation, likely due to our ability to keep the tissue intact. Although cavitation rheology does not capture the non-linear strains revealed by uniaxial testing and SAOS, it provides an opportunity to measure mechanical characteristics of lung tissue on a microscale level on intact tissues. Overall, our study demonstrates that each technique has independent benefits, and each technique revealed unique mechanical features of lung tissue that can contribute to a deeper understanding of lung tissue mechanics.

bioengineering↗

bioRxiv2017

Anomalous Diffusion as a Descriptive Model of Cell Migration

Appropriately chosen descriptive models of cell migration in biomaterials will allow researchers to characterize and ultimately predict the movement of cells in engineered systems for a variety of applications in tissue engineering. The persistent random walk (PRW) model accurately describes cell migration on two-dimensional (2D) substrates. However, this model inherently cannot describe subdiffusive cell movement, i.e. migration paths in which the root mean square displacement increases more slowly than the square root of the time interval. Subdiffusivity is a common characteristic of cells moving in confined environments, such as three-dimensional (3D) porous scaffolds, hydrogel networks, and in vivo tissues. We demonstrate that a generalized anomalous diffusion (AD) model, which uses a simple power law to relate the mean square displacement (MSD) to time, more accurately captures individual cell migration paths across a range of engineered 2D and 3D environments than does the more commonly used PRW model. We used the AD model parameters to distinguish cell movement profiles on substrates with different chemokinetic factors, geometries (2D vs 3D), substrate adhesivities, and compliances. Although the two models performed with equal precision for superdiffusive cells, we suggest a simple AD model, in lieu of PRW, to describe cell trajectories in populations with a significant subdiffusive fraction, such as cells in confined, 3D environments.

bioengineering↗

bioRxiv2017

Complementary, High-throughput Methods for Creating Multi-dimensional, PEG-based Biomaterials

Tunable biomaterials that mimic selected features of the extracellular matrix (ECM), such as its stiffness, protein composition, and dimensionality, are increasingly popular for studying how cells sense and respond to ECM cues. In the field, there exists a significant trade-off for how complex and how well these biomaterials represent the in vivo microenvironment, versus how easy they are to make and how adaptable they are to automated fabrication techniques. To address this need to integrate more complex biomaterials design with high-throughput screening approaches, we present several methods to fabricate synthetic biomaterials in 96-well plates and demonstrate that they can be adapted to semi-automated liquid handling robotics. These platforms include 1) glass bottom plates with covalently attached ECM proteins, and 2) hydrogels with tunable stiffness and protein composition with either cells seeded on the surface, or 3) laden within the three-dimensional hydrogel matrix. This study includes proof-of-concept results demonstrating control over breast cancer cell line phenotypes via these ECM cues in a semi-automated fashion. We foresee the use of these methods as a mechanism to bridge the gap between high-throughput cell-matrix screening and engineered ECM-mimicking biomaterials.

bioengineering↗

bioRxiv2017

Control of Thiol-Maleimide Reaction Kinetics in PEG Hydrogel Networks

Michael-type addition reactions are widely used to polymerize biocompatible hydrogels. The thiol-maleimide modality achieves the highest macromer coupling efficiency of the reported Michael-type pairs, but the resulting hydrogel networks are heterogeneous, because polymerization is faster than the individual components can be manually mixed. The reactivity of the thiol dictates the overall reaction speed, which can be slowed in organic solvents and acidic buffers. Since these modifications also reduce the biocompatibility of resulting hydrogels, we investigated a series of biocompatible buffers and crosslinkers to decelerate gelation while maintaining high cell viability. We found that lowering the polymer weight percentage (wt%), buffer concentration, and pH slowed gelation kinetics, but crosslinking with an electronegative peptide was optimal for both kinetics and cell viability. Slowing the speed of polymerization resulted in more uniform hydrogels, both in terms of visual inspection and the diffusion of small molecules through the network. However, reactions that were too slow resulted in non-uniform particle dispersion due to settling, thus there is a trade-off in hydrogel network uniformity versus cell distribution in the hydrogels when using these networks in cell applications.

bioengineering↗

bioRxiv2017

Zwitterionic hydrogels modulate the foreign body response in a modulus-dependent manner

Reducing the foreign body response (FBR) to implanted biomaterials will enhance their in vivo performance in tissue engineering. Poly(ethylene glycol) (PEG) hydrogels are increasingly popular for this application due to their low cost and ease of use. PEG hydrogels can elicit chronic inflammation upon implantation, but recent evidence has suggested that extremely hydrophilic, zwitterionic hydrogels can reduce the FBR to particles and gels. To expand on this approach, we synthesized hydrogels of co-monomers PEG and the zwitterion phosphorylcholine (PC) to quantify the combinatorial effects of modulus and hydrophilicity on the FBR. Surprisingly, hydrogels with the highest amount of zwitterionic co-monomer elicited the highest FBR we observed. Lowering the hydrogel modulus (165 kPa to 3 kPa), or PC content (20 wt% to 0 wt%), mitigated this effect. A high density of macrophages was found at the surface of implants associated with a high FBR, and mass spectrometry analysis of the proteins adsorbed to these gels implicated extracellular matrix, immune response, and cell adhesion protein categories as drivers of macrophage recruitment to these hydrogels. Overall, we show that modulus regulates macrophage adhesion to zwitterionic-PEG hydrogels, and demonstrate that chemical modifications to hydrogels should be studied in parallel with their physical properties to optimize implant design.\n\nHighlightsO_LIModulus and zwitterion content independently modulate the foreign body response to soft hydrogels\nC_LIO_LISoft PEG hydrogels synthesized with the zwitterionic PC co-monomer are pro-inflammatory as modulus is increased\nC_LIO_LIThe chemical and physical properties of hydrogels influence the foreign body response via macrophage recruitment and protein adsorption\nC_LI

bioengineering↗

bioRxiv2017

A Biomaterial Screening Approach to Reveal Microenvironmental Mechanisms of Drug Resistance

TOC FigureDrug response screening, gene expression, and kinome signaling were combined across biomaterial platforms to combat adaptive resistance to sorafenib.\n\n\n\nO_FIG O_LINKSMALLFIG WIDTH=200 HEIGHT=158 SRC=\"FIGDIR/small/168039_ufig1.gif\" ALT=\"Figure 1\">\nView larger version (60K):\norg.highwire.dtl.DTLVardef@a7af0eorg.highwire.dtl.DTLVardef@d5f2bborg.highwire.dtl.DTLVardef@330bd6org.highwire.dtl.DTLVardef@14e1f1d_HPS_FORMAT_FIGEXP M_FIG C_FIG Insight BoxWe combined biomaterial platforms, drug screening, and systems biology to identify mechanisms of extracellular matrix-mediated adaptive resistance to RTK-targeted cancer therapies. Drug response was significantly varied across biomaterials with altered stiffness, dimensionality, and cell-cell contacts, and kinome reprogramming was responsible for these differences in drug sensitivity. Screening across many platforms and applying a systems biology analysis were necessary to identify MEK phosphorylation as the key factor associated with variation in drug response. This method uncovered the combination therapy of sorafenib with a MEK inhibitor, which decreased viability on and within biomaterials in vitro, but was not captured by screening on tissue culture plastic alone. This combination therapy also reduced tumor burden in vivo, and revealed a promising approach for combating adaptive drug resistance.\n\nAbstractTraditional drug screening methods lack features of the tumor microenvironment that contribute to resistance. Most studies examine cell response in a single biomaterial platform in depth, leaving a gap in understanding how extracellular signals such as stiffness, dimensionality, and cell-cell contacts act independently or are integrated within a cell to affect either drug sensitivity or resistance. This is critically important, as adaptive resistance is mediated, at least in part, by the extracellular matrix (ECM) of the tumor microenvironment. We developed an approach to screen drug responses in cells cultured on 2D and in 3D biomaterial environments to explore how key features of ECM mediate drug response. This approach uncovered that cells on 2D hydrogels and spheroids encapsulated in 3D hydrogels were less responsive to receptor tyrosine kinase (RTK)-targeting drugs sorafenib and lapatinib, but not cytotoxic drugs, compared to single cells in hydrogels and cells on plastic. We found that transcriptomic differences between these in vitro models and tumor xenografts did not reveal mechanisms of ECM-mediated resistance to sorafenib. However, a systems biology analysis of phospho-kinome data uncovered that variation in MEK phosphorylation was associated with RTK-targeted drug resistance. Using sorafenib as a model drug, we found that co-administration with a MEK inhibitor decreased ECM-mediated resistance in vitro and reduced in vivo tumor burden compared to sorafenib alone. In sum, we provide a novel strategy for identifying and overcoming ECM-mediated resistance mechanisms by performing drug screening, phospho-kinome analysis, and systems biology across multiple biomaterial environments.

bioengineering↗