Biology subjects

Orhant-Prioux, M.

Publications and source records attributed to Orhant-Prioux, M..

7 recordsLinked to original sources

bioRxiv2025

Fabrication of microcompartments with controlled size and shape for encapsulating active matter

In all living systems, the cytoplasm is separated from the external environment by membranes. This confinement imposes spatial constraints on the self-organization of internal components, filaments and organelles. While reconstituted systems are instrumental for understanding fundamental biological principles, traditional experiments often utilize volumes vastly larger than actual cells. In recent studies, water-in-oil droplets or giant unilamellar vesicles have been widely used to impose confinement. However, these compartments present imaging challenges and make precise protein content control difficult. To address these limitations, we have developed versatile microwells that are straightforward to implement, compatible with different types of imaging, suitable for long-term experiments, and capable of generating large amounts of data. These microwells are compatible with several surface treatments and a wide range of experimental techniques (such as micropatterning) making them a powerful tool for answering key questions in cell biology. We present here a detailed protocol of the fabrication of the microwells as well as characterization of the method to ensure quality throughout the manufacturing process. These microwells support various cytoskeleton-based processes including actin polymerization, dynamic steady-state actin networks, and composite actin-microtubule networks. More broadly, they can be used to encapsulate and study over time any kind of active matter.

biochemistry↗

bioRxiv2025

Filament transport supports contractile steady states of actin networks.

In all eukaryotic cells, the actin cytoskeleton is maintained in a dynamic steady-state. Actin filaments are continuously displaced from cell periphery, where they assemble, towards the cells center, where they disassemble. Despite this constant flow and turnover, cellular networks maintain their overall architecture constant. How such a flow of material can support dynamic yet steady cellular architectures remains an open question. To investigate the role of myosin-based forces in contractile steady-states of actin networks, we used a reconstituted in vitro system based on a minimal set of purified proteins, namely actin, myosin and actin regulators. We found that, contrary to previous bulk experiments, when confined in microwells, the actin network could self-organize into ordered arrangements of contractile bundles, flowing continuously without collapsing. This was supported by three-dimensional fluxes of actin filaments, spatially separated yet balancing each other. Unexpectedly, maintaining these fluxes did not depend on filament nucleation or elongation, but solely on filament transport. Ablation of the contractile bundles abolished the flux balance and led to network collapse. These findings demonstrate that the dynamic steady state of actin networks can be sustained by filament displacement and recirculation, independently of filament assembly and disassembly. Significance StatementCellular structures continuously self-renew, with new material constantly being added and removed while maintaining overall structural stability. This is particularly true for the actin cytoskeleton, whose components are continuously assembled, displaced, and reassembled. Understanding this process is fundamental to uncovering how cells regulate their architecture and adapt to stimuli. Here, we reconstitute an in vitro actomyosin network capable of contracting steadily over time without collapsing, relying solely on myosin-based transport. These findings demonstrate that a minimal system consisting of actin and molecular motors can effectively recapitulate the ability of actin networks to self-organize into stable yet dynamic architectures.

biophysics↗

bioRxiv2023

Microtubules under mechanical pressure can breach dense actin networks

The crosstalk between actin network and microtubules is key to the establishment of cell polarity. It ensures that the asymmetry of actin architec ture along cell periphery directs the organization of microtubules in cell interior. In particular, the way the two networks are physically inter-twined regulates the spatial organization and the distribution of forces in the microtubule network. While their biochemical crosstalk is getting uncovered, their mechanical crosstalk is still poorly understood. Here we designed an in vitro reconstitution assay to study the physical interaction between dynamic microtubules with various structures made of actin fil aments. We found that microtubules can align and move by their polymerization force along linear bundles of actin filaments. But they cannot enter dense and branched actin meshworks, such as those found in the lamellipodium along cell periphery. However, when microtubules are immobilized, by their crosslinking with actin structures or others means, the force of polymerization builds up pressure in the microtubules that is sufficient to allow them to breach and penetrate these dense actin meshworks. This mechanism may explain the final progression of microtubules up to cell periphery through the denser parts of the actin network.

biophysics↗

bioRxiv2022

Friction patterns guide actin network contraction

The shape of cells is the outcome of the balance of inner forces produced by the actomyosin network and the resistive forces produced by cell adhesion to their environment. The specific contributions of contractile, anchoring and friction forces to network deformation rate and orientation are difficult to disentangle in living cells where they influence each other. Here, we reconstituted contractile acto-myosin networks in vitro to study specifically the role of the friction forces between the network and its anchoring substrate. To modulate the magnitude and spatial distribution of friction forces, we micropatterned actin nucleation promoting factors on glass or on a lipid bilayer. We adapted their concentrations on each surface to induce the assembly of actin networks of similar densities, and compare the deformation of the network toward the centroid of the pattern shape upon myosin-induced contraction. We found that actin network deformation was faster and more coordinated on lipid bilayers than on glass, showing the resistance of friction to network contraction. To further study the role of the spatial distribution of these friction forces, we designed heterogeneous micropatterns made of glass and lipids. The deformation upon contraction was no longer symmetric but biased toward the region of higher friction. Furthermore, we showed that the pattern of friction could robustly drive network contraction and dominate the contribution of asymmetric distributions of myosins. Therefore, we demonstrate that during contraction both the active and resistive forces are essential to direct the actin network deformation. Significance statementCell shape changes are controlled by complex sets of mechanical forces of various origins. Numerous studies have been dedicated to the role of active forces, originating from molecular motors and filament polymerization, but much less is known about the guiding role of resistive forces. Here we show that a non-uniform distribution of friction forces between a contracting acto-myosin network and its underlying substrate can direct its deformation as it contracts. Our results suggest that the contribution of resistive forces, such as anchoring forces but also less specific viscous forces along cell surface, can be as significant as those of active forces in driving network deformation and should be considered in mechanical models describing the regulation of cell shape and movements.

biophysics↗

bioRxiv2022

Recycling limits the lifetime of actin turnover

Intracellular organization is largely mediated by the actin turnover. Cellular actin networks consume matter and energy to sustain their dynamics, while maintaining their appearance. This behavior, called dynamic steady state, enables cells to sense and adapt to their environment. However, how structural stability can be maintained during the constant turnover of a limited actin monomer pool is poorly understood. To answer this question, we developed an experimental system using actin bead motility in a compartment with a limited amount of monomer. We used the speed and the size of the actin comet tails to evaluate the systems monomer consumption and its lifetime. We established the relative contribution of actin assembly, disassembly and recycling for a bead movement over tens of hours. Recycling mediated by cyclase-associated proteins is the key step in allowing the reuse of monomers for multiple assembly cycles. Energy supply and protein aging are also factors that limit the lifetime of actin turnover. This work reveals the balancing mechanism for long-term network assembly with a limited amount of building blocks.

cell biology↗

bioRxiv2022

The architecture of the actin network can balance the pushing forces produced by growing microtubules.

The position of centrosome, the main microtubule-organizing center (MTOC), is instrumental in the definition of cell polarity. It is defined by the balance of tension and pressure forces in the network of microtubules (MTs). As MTs polymerize against the cell periphery, pressure increases and produces pushing forces on the MTOC. How the mechanical interplay between MTs and the actin network is involved in the regulation of these forces remains poorly understood, in particular because its investigation is technically limited by the structural and biochemical complexity of the cell cytoplasm. Here, in a cell-free assay, we used purified proteins to reconstitute the interaction of an aster of dynamic MTs with actin networks of various compositions and architectures in cell-sized microwells. In the absence of actin filaments, the positioning of the MTOC was highly sensitive to variations in MT length. The presence of a bulk actin filament network limited MTs deformation and displacement, and MTOCs were hold in place. In contrast, the assembly of a dense and branched actin network along the edges of the wells centered the MTOCs by preventing MT slippage and thus maintaining an isotropic balance of pushing forces. In agreement with this, an asymmetric peripheral actin network caused the MTOC to decenter by creating an asymmetry in the pushing forces. Numerical simulations demonstrated that steric hindrance by actin networks, at the tip or along the entire length of MTs, can modulate MTOC positioning, as observed in the experiments. Overall, our results show that actin networks can limit the sensitivity of MTOC positioning to MT length and enforce robust MTOC centering or decentering depending on its architecture.

cell biology↗

bioRxiv2019

Complex eukaryotic-like actin regulation systems from Asgard archaea

Asgard archaea genomes contain potential eukaryotic-like genes that provide intriguing insight for the evolution of eukaryotes. The actin polymerization/depolymerization cycle is critical for providing force and structure for a variety of processes in eukaryotes, including membrane remodelling. Here, we identify actin filament severing, capping, annealing and bundling, and monomer sequestration activities by gelsolin proteins from Thorarchaeota (Thor), which complete a eukaryote-like actin depolymerization cycle. Thor gelsolins are comprised of one or two copies of the prototypical gelsolin domain and appear to be a record of an initial pre-eukaryotic gene duplication event, since eukaryotic gelsolins are generally comprised of three to six domains. X-ray crystal structure determination of these proteins in complex with mammalian actin revealed similar interactions to the first domain of human gelsolin. Asgard two-domain, but not one-domain, gelsolins contain calcium-binding sites, which is manifested in calcium-controlled activities. Expression of two-domain gelsolins in mammalian cells led to enhanced actin filament disassembly on ionomycin-triggered calcium release. This functional demonstration, at the cellular level, provides evidence for calcium-regulated actin cytoskeleton in Asgard archaea, and indicates that the calcium-regulated actin cytoskeleton predates eukaryotes. In eukaryotes, dynamic bundled filaments are responsible for shaping filopodia and microvilli. By correlation, the formation of the protrusions observed from Lokiarchaeota cell bodies may involve gelsolin-regulated actin structures.

evolutionary biology↗