Biology subjects

Nummenmaa, A.

Publications and source records attributed to Nummenmaa, A..

13 recordsLinked to original sources

bioRxiv2026

The effect of EEG lead configuration on early TMS-EEG artifacts

Transcranial magnetic stimulation (TMS) combined with electroencephalography (EEG) has strong potential for recording cortical reactivity and connectivity. However, this promise is hampered by TMS-induced EEG artifacts. Here, we examine the origins of these artifacts with phantom TMS-EEG recordings and simulations. We focus on two major types of artifacts: (1) the TMS pulse artifact during each [~]0.2 ms TMS pulse and (2) the decay artifact that may last tens of milliseconds. We examine how these artifacts change as a function of the relative position between TMS coil windings and EEG electrode leads. We also examine the hypothesis that certain EEG lead configurations may reduce or even cancel out these artifacts. In experimental results across 23 different TMS coil / EEG lead configurations, the amplitudes between the TMS pulse artifact and the decay artifact were highly correlated (Spearman {rho} = 0.86, p < 0.001), suggesting that the decay artifact is caused by the TMS pulse artifact. As predicted, in certain EEG lead configurations, both the TMS pulse and decay artifacts were minimized. The simulations confirmed that the TMS pulse artifacts depended on the electromagnetic induction from the TMS coil windings to the EEG leads. These results illuminate the generator mechanisms of--and possible means to reduce--both artifacts.

neuroscience↗

bioRxiv2024

Electromagnetic Modeling within a Microscopically Realistic Brain - Implications for Brain Stimulation

Modeling brain stimulation at the microscopic scale may reveal new paradigms for various stimulation modalities. We present the largest map to date of extracellular electric field distributions within a layer L2/L3 mouse primary visual cortex brain sample. This was enabled by the automated analysis of serial section electron microscopy images with improved handling of image defects, covering a volume of 250 x 140 x 90 m3. The map was obtained by applying a uniform brain stimulation electric field at three different polarizations and accurately computing microscopic field perturbations using the boundary element fast multipole method. We used the map to identify the effect of microscopic field perturbations on the activation thresholds of individual neurons. Previous relevant studies modeled a macroscopically homogeneous cortical volume. Our result shows that the microscopic field perturbations - an electric field spatial noise with a mean value of zero - only modestly influence the macroscopically predicted stimulation field strengths necessary for neuronal activation. The thresholds do not change by more than 10% on average. Under the stated limitations and assumptions of our method, this result justifies the conventional theory of "invisible" neurons embedded in a macroscopic brain model for transcranial magnetic and transcranial electrical stimulation. However, our result is solely sample-specific and largely neglects the effect of the microcapillary network. Furthermore, we only considered the uniform impressed field and a single- pulse stimulation time course. Significance statementThis study is arguably the first attempt to model brain stimulation at the microscopic scale, enabled by automated analysis of modern scanning electron microscopy images of the brain. It concentrates on modeling microscopic perturbations of the extracellular electric field caused by the physical cell structure and is applicable to any type of brain stimulation. Data availability statementPost-processed cell CAD models (383, stl format), microcapillary CAD models (34, stl format), post-processed neuron morphologies (267, swc format), extracellular electric field and potential distributions at different polarizations (267x3, MATLAB format), *.ses projects files for biophysical modeling with Neuron software (267x2, Neuron format), and computed neuron activating thresholds at different conditions (267x8, Excel tables, without the sample polarization correction from Section 2.8) are made available online through BossDB, a volumetric open-source database for 3D and 4D neuroscience data.

neuroscience↗

bioRxiv2024

Decoding auditory working memory content from EEG aftereffects of auditory-cortical TMS

Working memory (WM), short term maintenance of information for goal directed behavior, is essential to human cognition. Identifying the neural mechanisms supporting WM is a focal point of neuroscientific research. One prominent theory hypothesizes that WM content is carried in "activity-silent" brain states involving short-term synaptic changes. Information carried in such brain states could be decodable from content-specific changes in responses to unrelated "impulse stimuli". Here, we used single-pulse transcranial magnetic stimulation (spTMS) as the impulse stimulus and then decoded content maintained in WM from EEG using multivariate pattern analysis (MVPA) with robust non-parametric permutation testing. The decoding accuracy of WM content significantly enhanced after spTMS was delivered to the posterior superior temporal cortex during WM maintenance. Our results show that WM maintenance involves brain states, which are activity silent relative to other intrinsic processes visible in the EEG signal.

neuroscience↗

bioRxiv2023

Software Package for Transcranial Magnetic Stimulation Coil and Coil Array Analysis and Design

ObjectiveThis study aims to describe a MATLAB software package for transcranial magnetic stimulation (TMS) coil analysis and design. ApproachElectric and magnetic fields of the coils as well as their self- and mutual (for coil arrays) inductances are computed, with or without a magnetic core. Solid and stranded (Litz wire) conductors are also taken into consideration. The starting point is the centerline of a coil conductor(s), which is a 3D curve defined by the user. Then, a wire mesh and a computer aided design (CAD) mesh for the volume conductor of a given cross-section (circular, elliptical, or rectangular) are automatically generated. Self- and mutual inductances of the coil(s) are computed. Given the conductor current and its time derivative, electric and magnetic fields of the coil(s) are determined anywhere in space. Computations are performed with the fast multipole method (FMM), which is the most efficient way to evaluate the fields of many elementary current elements (current dipoles) comprising the current carrying conductor at a large number of observation points. This is the major underlying mathematical operation behind both inductance and field calculations. Main ResultsThe wire-based approach enables precise replication of even the most complex physical conductor geometries, while the FMM acceleration quickly evaluates large quantities of elementary current filaments. Agreement to within 0.74% was obtained between the inductances computed by the FMM method and ANSYS Maxwell 3D for the same coil model. Although not provided in this study, it is possible to evaluate non-linear magnetic cores in addition to the linear core exemplified. An experimental comparison was carried out against a physical MagVenture C-B60 coil; the measured and simulated inductances differed by only 1.25%, and nearly perfect correlation was found between the measured and computed E-field values at each observation point. SignificanceThe developed software package is applicable to any quasistatic inductor design, not necessarily to the TMS coils only.

neuroscience↗

bioRxiv2023

An Adaptive H-Refinement Method for the Boundary Element Fast Multipole Method for Quasi-static Electromagnetic Modeling

ObjectiveIn our recent work pertinent to modeling of brain stimulation and neurophysiological recordings, substantial modeling errors in the computed electric field and potential have sometimes been observed for standard multi-compartment head models. The goal of this study is to quantify those errors and, further, eliminate them through an adaptive mesh refinement (AMR) algorithm. The study concentrates on transcranial magnetic stimulation (TMS), transcranial electrical stimulation (TES), and electroencephalography (EEG) forward problems. ApproachWe propose, describe, and systematically investigate an AMR method using the Boundary Element Method with Fast Multipole Acceleration (BEM-FMM) as the base numerical solver. The goal is to efficiently allocate additional unknowns to critical areas of the model, where they will best improve solution accuracy. The implemented AMR methods accuracy improvement is measured on head models constructed from 16 Human Connectome Project subjects under problem classes of TES, TMS, and EEG. Errors are computed between three solutions: an initial non-adaptive solution, a solution found after applying AMR with a conservative refinement rate, and a "silver-standard" solution found by subsequent 4:1 global refinement of the adaptively-refined model. Main ResultsExcellent agreement is shown between the adaptively-refined and silver-standard solutions for standard head models. AMR is found to be vital for accurate modeling of TES and EEG forward problems for standard models: an increase of less than 25% (on average) in number of mesh elements for these problems, efficiently allocated by AMR, exposes electric field/potential errors exceeding 60% (on average) in the solution for the unrefined models. SignificanceThis error has especially important implications for TES dosing prediction - where the stimula t ion strength plays a central role - and for EEG lead fields. Though the specific form of the AMR method described here is implemented for the BEM-FMM, we expect that AMR is applicable and even required for accurate electromagnetic simulations by other numerical modeling packages as well.

neuroscience↗

bioRxiv2023

Role of Articulatory Motor Networks in Perceptual Categorization of Speech Signals: A 7 T fMRI Study

BACKGROUNDThe association between brain regions involved in speech production and those that play a role in speech perception is not yet fully understood. We compared speech production related brain activity with activations resulting from perceptual categorization of syllables using high field 7 Tesla functional magnetic resonance imaging (fMRI) at 1-mm isotropic voxel resolution, enabling high localization accuracy compared to previous studies. METHODSBlood oxygenation level dependent (BOLD) signals were obtained in 20 normal hearing subjects using a simultaneous multi-slice (SMS) 7T echo-planar imaging (EPI) acquisition with whole-head coverage and 1 mm isotropic resolution. In a speech production localizer task, subjects were asked to produce a silent lip-round vowel /u/ in response to the visual cue "U" or purse their lips when they saw the cue "P". In a phoneme discrimination task, subjects were presented with pairs of syllables, which were equiprobably identical or different along an 8-step continuum between the prototypic /ba/ and /da/ sounds. After the presentation of each stimulus pair, the subjects were asked to indicate whether the two syllables they heard were identical or different by pressing one of two buttons. In a phoneme classification task, the subjects heard only one syllable and asked to indicate whether it was /ba/ or /da/. RESULTSUnivariate fMRI analyses using a parametric modulation approach suggested that left motor, premotor, and frontal cortex BOLD activations correlate with phoneme category variability in the /ba/-/da/ discrimination task. In contrast, the variability related to acoustic features of the phonemes were the highest in the right primary auditory cortex. Our multivariate pattern analysis (MVPA) suggested that left precentral/inferior frontal cortex areas, which were associated with speech production according to the localizer task, play a role also in perceptual categorization of the syllables. CONCLUSIONSThe results support the hypothesis that articulatory motor networks in the left hemisphere that are activated during speech production could also have a role in perceptual categorization of syllables. Importantly, high voxel-resolution combined with advanced coil technology allowed us to pinpoint the exact brain regions involved in both perception and production tasks.

neuroscience↗

bioRxiv2022

Genetic or transcranial magnetic stimulation of B-RAF-MEK signaling promotes CST axon sprouting and functional regeneration

Facilitating axon regeneration in the injured central nervous system remains a challenging task. RAF-MEK signaling plays an important role in axon elongation during nervous system development. Here we show that activation of B-RAF in mature corticospinal neurons elicited the expression of a discrete set of transcription factors previously implicated in the regeneration of zebrafish optic nerve axons. Genetic activation of B-RAF-MEK signaling promoted robust regeneration and sprouting of corticospinal tract axons after injury. Newly sprouting axon collaterals formed synaptic connections with spinal interneurons, correlating with the recovery of skilled motor function. Seeking a non-invasive way to stimulate axon regeneration, we found that suprathreshold high-frequency repetitive transcranial magnetic stimulation activates the B-RAF canonical effectors MEK1/2 and requires MEK1/2 activity to promote corticospinal axon regeneration and sprouting after injury. These data demonstrate a central role of neuron-intrinsic RAF-MEK signaling in enhancing the growth capacity of mature corticospinal neurons and propose HF-rTMS as a potential therapy for spinal cord injury. One Sentence SummaryGenetic or HF-rTMS-mediated activation of B-RAF- MEK signaling promotes CST axon sprouting and functional regeneration after a spinal cord injury.

neuroscience↗

bioRxiv2020

A Software Toolkit for TMS Electric-Field Modeling with Boundary Element Fast Multipole Method: An Efficient MATLAB Implementation

BackgroundTranscranial magnetic stimulation (TMS) is currently the only non-invasive neurostimulation modality that enables painless and safe supra-threshold stimulation by employing electromagnetic induction to efficiently penetrate the skull. Accurate, fast, and high resolution modeling of the electric fields (E-fields) may significantly improve individualized targeting and dosing of TMS and therefore enhance the efficiency of existing clinical protocols as well as help establish new application domains. ObjectiveTo present and disseminate our TMS modeling software toolkit, including several new algorithmic developments, and to apply this software to realistic TMS modeling scenarios given a high-resolution model of the human head including cortical geometry and an accurate coil model. MethodThe recently developed charge-based boundary element fast multipole method (BEM-FMM) is employed as an alternative to the 1st order finite element method (FEM) most commonly used today. The BEM-FMM approach provides high accuracy and unconstrained field resolution close to and across cortical interfaces. Here, the previously proposed BEM-FMM algorithm has been improved in several novel ways. Results and ConclusionsThe improvements resulted in a threefold increase in computational speed while maintaining the same solution accuracy. The computational code based on the MATLAB(R) platform is made available to all interested researchers, along with a coil model repository and examples to create custom coils, head model repository, and supporting documentation. The presented software toolkit may be useful for post-hoc analyses of navigated TMS data using high-resolution subject-specific head models as well as accurate and fast modeling for the purposes of TMS coil/hardware development.

bioengineering↗

bioRxiv2020

A Note about the Individualized TMS Focality

A particular yet computationally successful solution of an inverse transcranial magnetic stimulation (TMS) problem is reported. The goal has been focusing the normal unsigned electric field at the inner cortical surface and its vicinity (the D wave activation site) given a unique high-resolution gyral pattern of a subject and a precise coil model. For 16 subjects and 32 arbitrary target points, the solution decreases the mean deviation of the maximum-field domain from the target by a factor of 2 on average. The reduction in the maximum-field area is expected to quadruple. The average final deviation is 6 mm. Rotation about the coil axis is the most significantly altered parameter, and the coil moves 10 mm on average during optimization. The maximum electric field magnitude decreases by 16% on average. Stability of the solution is enforced. The relative average de-focalization is below 1.2 when position/orientation accuracies are within 3 mm/6 degrees, respectively. The solution for the maximum normal field may also maximize the total field and its gradient for neighboring cortical layers III-V (I wave activation).

bioengineering↗

bioRxiv2019

Software Toolkit for Fast High-Resolution TMS Modeling

Computational modeling of Transcranial Magnetic Stimulation (TMS) is a tradeoff between computational speed vs. spatial precision. In this study, we introduce a software toolkit for high-resolution TMS modeling, which may offer the best of both. The toolkit employs the recently developed boundary element fast multipole method (BEM-FMM) with accurate solution computations close to tissue interfaces. It operates within the MATLAB platform and is designed for a broad, medically-oriented computational research community. To enable easy, subject-specific operation, the package is compatible with human head models generated with automated tools such as SimNIBS and FreeSurfer.\n\nBoth coil design in free space as well as efficacy and focality of TMS for a specific subject could be modeled by the package, including optional user-defined parametric loops. Detailed and widely used coil models, generated in both CAD and wire formats, may include several hundred thousand elementary current elements and observation spaces with approximately 1 M field points; the corresponding computational times are on the order of 1 sec. Detailed head models with approximately 1 M triangular facets and a mesh resolution of 0.6 points per mm2 are simulated in approximately 1.5 min which is arguably the fastest time to date. Further reduction of computational times is foreseen. The toolkit is augmented with a population of 16 ready-to-use head models for performing simulations for computational studies that do not involve MRI data collection. The toolkit is also augmented with a coil geometry generator capable of creating accurate coil models.

neuroscience↗

bioRxiv2019

Solving High-Resolution Forward Problems for Extra- and Intracranial Neurophysiological Recordings Using Boundary Element Fast Multipole Method

We present a general numerical approach for solving the forward problem in high-resolution. This approach can be employed in the analysis of noninvasive electroencephalography (EEG) and magnetoencephalography (MEG) as well as invasive electrocorticography (ECoG), stereoencephalography (sEEG), and local field potential (LFP) recordings. The underlying algorithm is our recently developed boundary element fast multipole method (BEM-FMM) that simulates anatomically realistic head models with unprecedented numerical accuracy and speed. This is achieved by utilizing the adjoint double layer formulation and zeroth-order basis functions in conjunction with the FMM acceleration. We present the mathematical formalism in detail and validate the method by applying it to the canonical multilayer sphere problem. The numerical error of BEM-FMM is 2-10 times lower while the computational speed is 1.5-20 times faster than those of the standard first-order FEM. We present four practical case studies: (i) evaluation of the effect of a detailed head model on the accuracy of EEG/MEG forward solution; (ii) demonstration of the ability to accurately calculate the electric potential and the magnetic field in the immediate vicinity of the sources and conductivity boundaries; (iii) computation of the field of a spatially extended cortical equivalent dipole layer; and (iv) taking into account the effect a fontanel for infant EEG source modeling and comparison of the results with a commercially available FEM. In all cases, BEM-FMM provided versatile, fast, and accurate high-resolution modeling of the electromagnetic field and has the potential of becoming a standard tool for modeling both extracranial and intracranial electrophysiological signals.

neuroscience↗

bioRxiv2019

Modeling Primary Fields of TMS Coils with the Fast Multipole Method

AbstractIn this study, an accurate TMS-coil modeling approach based on conductors cross-section representation with many distributed current filaments coupled with an efficient fast multipole method (FMM) accelerator is developed and tested. Uniform (Litz wire) or skin-effect based current distributions are included into consideration. Speed and accuracy estimates as well as two application examples are given, which indicate that this approach is potentially capable of rapid and accurate evaluation of various detailed TMS coil designs and arrays of such coils.\n\nThe MATLAB-based wire and CAD mesh generator for the coil geometry is interfaced with the FMM FORTAN program, which is also compiled within the MATLAB shell. No extra MATLAB toolboxes are necessary. The CAD model of the coil can be imported into any other computational software package in STL format. The algorithm is organized in the form of a MATLAB-based toolkit. First, a coil model is generated using a dedicated script. Then, we compute high-resolution 2D contour plots for any component of the electric and/or magnetic field in coronal, sagittal, and transverse planes via FMM. These two scripts may be further augmented with a parametric loop to enable rapid analysis.\n\nObjectiveWe show how the fast multipole method can be applied to compute primary electric and magnetic fields for detailed TMS coil models

neuroscience↗

bioRxiv2018

Collection of Sixteen High-Quality Human Head CAD Models Generated with SimNIBS 2.1 Using Connectome Subject Data within MATLAB(R) Platform

The goal of this study is to introduce a collection of sixteen high-resolution, 2-manifold CAD compatible head models within the MATLAB platform available to all interested parties for electromagnetic and acoustic simulations. Each model contains skin, skull, CSF, GM, cerebellum, WM, and ventricles head compartments and possesses an \"onion\" topology: the grey matter shell is a container for white matter, ventricles, and cerebellum objects, the CSF shell contains the grey matter shell, the skull shell contains the CSF shell, and finally the skin or scalp shell contains the skull shell. The models are fully compatible with ANSYS ED FEM software, CST Studio Suite, Sim4Life/SEMCAD software, and other electromagnetic software packages.\n\nThe collection is based on MRI data from the Human Connectome Project (HCP) segmented using the SimNIBS 2.1/2.1.1 processing pipeline. The average number of triangular surface facets in a model is 866,000, the average triangle quality is 0.25, the average edge length is 1.48 mm, and the average surface mesh density or resolution is 0.57 points per mm2. If necessary, a finer model mesh can be created for every head using available MATLAB tools.

bioengineering↗