Biology subjects

Norn, C.

Publications and source records attributed to Norn, C..

10 recordsLinked to original sources

bioRxiv2024

Computational design of serine hydrolases

Enzymes that proceed through multistep reaction mechanisms often utilize complex, polar active sites positioned with sub-angstrom precision to mediate distinct chemical steps, which makes their de novo construction extremely challenging. We sought to overcome this challenge using the classic catalytic triad and oxyanion hole of serine hydrolases as a model system. We used RFdiffusion1 to generate proteins housing catalytic sites of increasing complexity and varying geometry, and a newly developed ensemble generation method called ChemNet to assess active site geometry and preorganization at each step of the reaction. Experimental characterization revealed novel serine hydrolases that catalyze ester hydrolysis with catalytic efficiencies (kcat/Km) up to 3.8 x 103 M-1 s-1, closely match the design models (C RMSDs < 1 [A]), and have folds distinct from natural serine hydrolases. In silico selection of designs based on active site preorganization across the reaction coordinate considerably increased success rates, enabling identification of new catalysts in screens of as few as 20 designs. Our de novo buildup approach provides insight into the geometric determinants of catalysis that complements what can be obtained from structural and mutational studies of native enzymes (in which catalytic group geometry and active site makeup cannot be so systematically varied), and provides a roadmap for the design of industrially relevant serine hydrolases and, more generally, for designing complex enzymes that catalyze multi-step transformations.

biochemistry↗

bioRxiv2024

Improved prediction of site-rates from structure with averaging across homologs

Variation in mutation rates at sites in proteins can largely be understood by the constraint that proteins must fold into stable structures. Models that calculate site-specific rates based on protein structure and a thermodynamic stability model have shown a significant but modest ability to predict empirical site-specific rates calculated from sequence. Models that use detailed atomistic models of protein energetics do not outperform simpler approaches using packing density. We demonstrate that a fundamental reason for this is that empirical site-specific rates are the result of the average effect of many different microenvironments in a phylogeny. By analyzing the results of evolutionary dynamics simulations, we show how averaging site-specific rates across many extant protein structures can lead to correct recovery of site-rate prediction. This result is also demonstrated in natural protein sequences and experimental structures. Using predicted structures, we demonstrate that atomistic models can improve upon contact density metrics in predicting site-specific rates from a structure. The results give fundamental insights into the factors governing the distribution of site-specific rates in protein families.

evolutionary biology↗

bioRxiv2023

De novo design of diverse small molecule binders and sensors using Shape Complementary Pseudocycles

A general method for designing proteins to bind and sense any small molecule of interest would be widely useful. Due to the small number of atoms to interact with, binding to small molecules with high affinity requires highly shape complementary pockets, and transducing binding events into signals is challenging. Here we describe an integrated deep learning and energy based approach for designing high shape complementarity binders to small molecules that are poised for downstream sensing applications. We employ deep learning generated psuedocycles with repeating structural units surrounding central pockets; depending on the geometry of the structural unit and repeat number, these pockets span wide ranges of sizes and shapes. For a small molecule target of interest, we extensively sample high shape complementarity pseudocycles to generate large numbers of customized potential binding pockets; the ligand binding poses and the interacting interfaces are then optimized for high affinity binding. We computationally design binders to four diverse molecules, including for the first time polar flexible molecules such as methotrexate and thyroxine, which are expressed at high levels and have nanomolar affinities straight out of the computer. Co-crystal structures are nearly identical to the design models. Taking advantage of the modular repeating structure of pseudocycles and central location of the binding pockets, we constructed low noise nanopore sensors and chemically induced dimerization systems by splitting the binders into domains which assemble into the original pseudocycle pocket upon target molecule addition. One Sentence SummaryWe use a pseuodocycle-based shape complementarity optimizing approach to design nanomolar binders to diverse ligands, including the flexible and polar methotrexate and thyroxine, that can be directly converted into ligand-gated nanopores and chemically induced dimerization systems.

biochemistry↗

bioRxiv2023

Small-molecule binding and sensing with a designed protein family

Despite transformative advances in protein design with deep learning, the design of small-molecule-binding proteins and sensors for arbitrary ligands remains a grand challenge. Here we combine deep learning and physics-based methods to generate a family of proteins with diverse and designable pocket geometries, which we employ to computationally design binders for six chemically and structurally distinct small-molecule targets. Biophysical characterization of the designed binders revealed nanomolar to low micromolar binding affinities and atomic-level design accuracy. The bound ligands are exposed at one edge of the binding pocket, enabling the de novo design of chemically induced dimerization (CID) systems; we take advantage of this to create a biosensor with nanomolar sensitivity for cortisol. Our approach provides a general method to design proteins that bind and sense small molecules for a wide range of analytical, environmental, and biomedical applications.

biochemistry↗

bioRxiv2023

Computational design of sequence-specific DNA-binding proteins

Sequence-specific DNA-binding proteins (DBPs) play critical roles in biology and biotechnology, and there has been considerable interest in the engineering of DBPs with new or altered specificities for genome editing and other applications. While there has been some success in reprogramming naturally occurring DBPs using selection methods, the computational design of new DBPs that recognize arbitrary target sites remains an outstanding challenge. We describe a computational method for the design of small DBPs that recognize specific target sequences through interactions with bases in the major groove, and employ this method in conjunction with experimental screening to generate binders for 5 distinct DNA targets. These binders exhibit specificity closely matching the computational models for the target DNA sequences at as many as 6 base positions and affinities as low as 30-100 nM. The crystal structure of a designed DBP-target site complex is in close agreement with the design model, highlighting the accuracy of the design method. The designed DBPs function in both Escherichia coli and mammalian cells to repress and activate transcription of neighboring genes. Our method is a substantial step towards a general route to small and hence readily deliverable sequence-specific DBPs for gene regulation and editing.

synthetic biology↗

bioRxiv2022

Top-down design of protein nanomaterials with reinforcement learning

The multisubunit protein assemblies that play critical roles in biology are the result of evolutionary selection for function of the entire assembly, and hence the subunits in structures such as icosahedral viral capsids often fit together with remarkable shape complementarity1,2. In contrast, the large multisubunit assemblies that have been created by de novo protein design, notably the icosahedral nanocages used in a new generation of potent vaccines3-7, have been built by first designing symmetric oligomers with cyclic symmetry and then assembling these into nanocages while keeping the internal structure fixed8-14, which results in more porous structures with less extensive shape matching between the components. Such hierarchical "bottom-up" design approaches have the advantage that one interface can be designed and validated in the context of the cyclic oligomer building block15,16, but the disadvantage that the structural and functional features of the assemblies are limited by the properties of the predesigned building blocks. To overcome this limitation, we set out to develop a "top-down" reinforcement learning based approach to protein nanomaterial design in which both the structures of the subunits and the interactions between them are built up coordinately in the context of the entire assembly. We developed a Monte Carlo tree search (MCTS) method17,18 which assembles protein monomer structures in the context of an overall architecture guided by a loss function which enables specification of any desired overall structural properties such as shape and porosity. We demonstrate the power of the approach by designing hyperstable icosahedral assemblies more compact than any previously observed protein icosahedral structure (designed or naturally occurring), that have very low porosity and are robust to fusion and display of proteins as complex as influenza hemagglutinin. CryoEM structures of two designs are very close to the computational design models. Our top-down reinforcement learning approach should enable the design of a wide variety of complex protein nanomaterials by direct optimization of overall system properties.

synthetic biology↗

bioRxiv2022

Atomistic simulation of protein evolution reveals sequence covariation and timedependent fluctuations of site-specific substitution rates

Thermodynamic stability is a crucial fitness constraint in protein evolution and is a central factor in shaping the sequence landscapes of proteins. The correlation between stability and molecular fitness depends on the mechanism that relates the biophysical property with biological function. In the simplest case, stability and fitness are related by the amount of folded protein. However, when proteins are toxic in the unfolded state, the fitness function shifts, resulting in higher stability under mutation-selection balance. Likewise, a higher population size results in a similar change in protein stability, as it magnifies the effect of the selection pressure in evolutionary dynamics. This study investigates how such factors affect the evolution of protein stability, site-specific mutation rates, and residue-residue covariation. To simulate evolutionary trajectories with realistic modeling of protein energetics, we develop an all-atom simulator of protein evolution, RosettaEvolve. By evolving proteins under different fitness functions, we can study how the fitness function affects the distribution of proposed and accepted mutations, site-specific rates, and the prevalence of correlated amino acid substitutions. We demonstrate that fitness pressure affects the proposal distribution of mutational effects, that changes in stability can largely explain variations in site-specific substitution rates in evolutionary trajectories, and that increased fitness pressure results in a stronger covariation signal. Our results give mechanistic insight into the evolutionary consequences of variation in protein stability and provide a basis to rationalize the strong covariation signal observed in natural sequence alignments.

bioinformatics↗

bioRxiv2020

A thermodynamic model of protein structure evolution explains empirical amino acid rate matrices

Proteins evolve under a myriad of biophysical selection pressures that collectively control the patterns of amino acid substitutions. Averaged over time and across proteins, these evolutionary pressures are sufficiently consistent to produce global substitution patterns that can be used to successfully find homologues, infer phylogenies, and reconstruct ancestral sequences. Although the factors which govern the variation of protein substitution rates has received much attention, the influence of thermodynamic stability constraints remains unresolved. Here we develop a simple model to calculate amino acid rate matrices from evolutionary dynamics controlled by a fitness function that reports on the thermodynamic effects of amino acid mutations in protein structures. This hybrid biophysical and evolutionary model accounts for nucleotide transition/transversion rate bias, multi-nucleotide codon changes, the number of codons per amino acid, and thermodynamic protein stability. We find that our theoretical model accurately recapitulates the complex pattern of empirical rates observed in common global amino acid substitution matrices used in phylogenetics. These results suggest that selection for thermodynamically stable proteins, coupled with nucleotide mutation bias filtered by the structure of the genetic code, is the primary global driver behind the amino acid substitution patterns observed in proteins throughout the tree of life.

evolutionary biology↗

bioRxiv2020

Protein sequence design by explicit energy landscape optimization

The protein design problem is to identify an amino acid sequence which folds to a desired structure. Given Anfinsens thermodynamic hypothesis of folding, this can be recast as finding an amino acid sequence for which the lowest energy conformation is that structure. As this calculation involves not only all possible amino acid sequences but also all possible structures, most current approaches focus instead on the more tractable problem of finding the lowest energy amino acid sequence for the desired structure, often checking by protein structure prediction in a second step that the desired structure is indeed the lowest energy conformation for the designed sequence, and discarding the in many cases large fraction of designed sequences for which this is not the case. Here we show that by backpropagating gradients through the trRosetta structure prediction network from the desired structure to the input amino acid sequence, we can directly optimize over all possible amino acid sequences and all possible structures, and in one calculation explicitly design amino acid sequences predicted to fold into the desired structure and not any other. We find that trRosetta calculations, which consider the full conformational landscape, can be more effective than Rosetta single point energy estimations in predicting folding and stability of de novo designed proteins. We compare sequence design by landscape optimization to the standard fixed backbone sequence design methodology in Rosetta, and show that the results of the former, but not the latter, are sensitive to the presence of competing low-lying states. We show further that more funneled energy landscapes can be designed by combining the strengths of the two approaches: the low resolution trRosetta model serves to disfavor alternative states, and the high resolution Rosetta model, to create a deep energy minimum at the design target structure. SignificanceComputational protein design has primarily focused on finding sequences which have very low energy in the target designed structure. However, what is most relevant during folding is not the absolute energy of the folded state, but the energy difference between the folded state and the lowest lying alternative states. We describe a deep learning approach which captures the entire folding landscape, and show that it can enhance current protein design methods.

biophysics↗

bioRxiv2020

A generative algorithm for de novo design of proteins with diverse pocket structures

To create new enzymes and biosensors from scratch, precise control over the structure of small molecule binding sites is of paramount importance, but systematically designing arbitrary protein pocket shapes and sizes remains an outstanding challenge. Using the NTF2-like structural superfamily as a model system, we developed a generative algorithm for creating a virtually unlimited number of de novo proteins supporting diverse pocket structures. The generative algorithm was tested and refined through feedback from two rounds of large scale experimental testing, involving in total, the assembly of synthetic genes encoding 7896 generated designs and assessment of their stability on the yeast cell surface, detailed biophysical characterization of 64 designs, and crystal structures of 5 designs. The refined algorithm generates proteins that remain folded at high temperatures and exhibit more pocket diversity than naturally occurring NTF2-like proteins. We expect this approach to transform the design of small molecule sensors and enzymes by enabling the creation of binding and active site geometries much more optimal for specific design challenges than is accessible by repurposing the limited number of naturally occurring NTF2-like proteins.

biochemistry↗