Biology subjects

Newham, E.

Publications and source records attributed to Newham, E..

9 recordsLinked to original sources

bioRxiv2026

Loss of lmx1ba drives premature osteoarthritis through disruption of skeletal homeostasis

Osteoarthritis is increasingly recognised as a disease of failed integration across the whole joint unit; however, the mechanisms that co-ordinate tissue integrity from development through to adult homeostasis remain largely unresolved. The LIM-homeodomain transcription factor LMX1B is a key determinant of embryonic skeletal patterning, but how it functions to regulate skeletal integrity in the mature skeleton is unknown. Recently, LMX1B was identified as a key driver of osteoarthritis. Here we show that loss of lmx1ba in zebrafish causes premature and progressive severe osteoarthritic pathology in adult spines and jaws, despite largely normal early skeletal patterning, revealing a conserved and continuous requirement for lmx1ba in joint maintenance beyond development. At a cellular level, loss of lmx1ba decouples osteoblast and osteoclast-mediated remodelling leading to bone overgrowth, heterogeneity of bone properties causing increased incidence of spontaneous fractures, and progressive abnormalities in spine morphology. In parallel, we observe degeneration of the intervertebral disc and dysregulation of the proteome and glycosaminoglycans indicative of disrupted extracellular matrix and a breakdown of the coordinated regulation of hard and soft tissue interfaces, which at the organismal level leads to altered joint performance. Notably, degeneration is restricted to mobile joints, and is not observed in cranial sutures, demonstrating a selective requirement for lmx1ba in mechanically active tissues. These changes are consistent with a model of spatially disrupted matrix properties that, under cyclic loading, promote progressive tissue damage. Our findings support a model in which continued expression of LMX1B in adulthood is required to maintain joint structures throughout life.

physiology↗

bioRxiv2025

Multimodal X-ray imaging reveals hierarchical fibre mechanics

Fibrous materials--ranging from connective tissues to engineered composites--are vital to many biological and man-made systems, optimised to withstand complex in-operando or in-vivo loading. The spines intervertebral discs (IVD) load-bearing capacity depends on a hierarchical extracellular matrix, where plywood-like lamellae of collagen fibres in the annulus fibrosus contain nanometre-scale fibrils built from staggered triple-helical monomers. How intact IVDs couple fibril-scale mechanics to fibre-scale organisation under load remains unresolved. Here we introduce TomoSAXS, a full-field 3D small-angle X-ray scattering tomography that maps fibril-to-fibre mechanics across an intact tissue. We show that intrafibrillar molecular pre-strain (D-period stagger) is lamellar textured and tightly correlated with microscale fibre strain. Pre-strain is inversely related to fibril strain and its variability, consistent with load-sharing through molecular unwinding. Radial strain bridges and high-curvature zones at the annulus fibrosus-nucleus pulposus interfaces emerge as critical regulators of local mechanics. These findings reveal concerted fibril-fibre interactions that sustain mechanical equilibrium in the IVD, preserving elasticity and shape. More broadly, TomoSAXS establishes a platform to visualise nano- to micro-scale matrix mechanics across biological and synthetic fibrous materials, with applications in ageing and disease, therapeutic evaluation, and the design of bio-based and bioinspired materials.

bioengineering↗

bioRxiv2024

Synchrotron Tomography-Based Finite Element Analysis of Vertebral Endplate Loading Reveals Functional Roles for Architectural Features

Lower back pain is linked to vertebral biomechanics, with vertebral endplates (VEPs) playing a key role. Finite element modelling (FEM) is a powerful tool for studying VEP biomechanics but relies on accurate material property inputs, which remain difficult to obtain. Synchrotron computed tomography (sCT) allows for detailed visualisation of the microstructure of intact VEPs under near-physiological loads and, when coupled with digital volume correlation (DVC), can be used to quantify three-dimensional (3D) strain fields, providing experimental reference data for FEM validation. We developed an inversion pipeline to spatially couple DVC data with an image-based FE model, and thus to estimate the elastic properties of rat VEPs. On the first rat lumbar FEM, the pipeline estimated a VEP elastic modulus of 129 MPa and a Poissons ratio of 0.24. Welchs ANOVA revealed statistically significant differences between FEM and DVC strain distributions (p < 0.001) but with small effect sizes ({superscript 2} = 0.1%-0.6%), indicating high practical similarity. Its efficacy was further validated using Bland-Altman analysis, demonstrating over 95% spatial agreement between the FEM-predicted strains and the DVC measurements across multiple loading steps. The pipelines consistency was further evaluated across multiple rat lumbar FE models (n = 3), yielding an estimated VEP elastic modulus = 145 {+/-} 18 MPa and a Poissons ratio = 0.28 {+/-} 0.04. Statistically significant regional variations of strain distribution in VEPs were also identified (p < 0.05 to p < 0.001, {superscript 2} up to 41.8%). This study highlighted the efficacy of the developed pipeline in estimating the isotropic elastic modulus and Poissons ratio of VEP FEMs in a physiologically relevant, complex load transfer system. Our pipeline may be used in estimating properties of VEP in larger animals and humans.

bioengineering↗

bioRxiv2024

Multimodal imaging reveals multiscale mechanical interplay in vertebral endplate microarchitecture during intervertebral disc loading

The function of all musculoskeletal joints depends on hierarchical structures spanning the molecular to whole joint scales. Investigating biomechanics across length scales requires correlative multiscale experimental methods. This study applies multimodal in situ synchrotron imaging techniques to spinal joints - focussing on the vertebral endplates - to explore relationships between structure and mechanical strain across spatial scales. Strain mapping using digital volume correlation combined with microarchitectural analysis reveals that high tensile and shear strains play a role in the cartilage to bone transition. Correlative imaging and diffraction show that bone contains narrower mineral nano-crystallites under greater compressive prestrain compared to calcified cartilage. We hypothesise that this multiscale structural adaptation supports the mechanical function of the intervertebral disc. Future applications of the techniques presented here have potential to help unravel biomechanical underpinnings of pathologies affecting mineralised tissue structure. The multiscale structure-function relationships uncovered here may inspire the design of biomaterials and orthopaedic implants.

bioengineering↗

bioRxiv2021

Fibrillar-Level Strain Gradients Across the Calcified Bone-Cartilage Interface

The bone-cartilage unit (BCU) is a universal feature in diarthrodial joints, which is mechanically-graded and subjected to shear and compressive strains. Changes in the BCU have been linked to osteoarthritis progression. Here we report existence of a physiological internal strain gradient (pre-strain) across the BCU at the ultrastructural scale of the extracellular matrix constituents, specifically the collagen fibril. We use X-ray scattering that probes changes in the axial periodicity of fibril-level D-stagger of tropocollagen molecules in the matrix fibrils, as a measure of microscopic pre-strain. We find that mineralized collagen nanofibrils in the calcified plate are in tensile pre-strain relative to the underlying trabecular bone. This behaviour contrasts with the previously accepted notion that fibrillar pre-strain (or D-stagger) in collagenous tissues always reduces with mineralization, via reduced hydration and associated swelling pressure. Within the calcified part of the BCU, a finer-scale gradient in pre-strain (0.6% increase over [~]50m) is observed. The increased fibrillar pre-strain is linked to prior research reporting large tissue-level residual strains under compression. The findings may have biomechanical adaptative significance: higher in-built molecular level resilience/damage resistance to physiological compression, and disruption of the molecular-level pre-strains during remodelling of the BCI may be potential factors in osteoarthritis-based degeneration.

bioengineering↗

bioRxiv2021

A robust, semi-automated approach for counting cementum increments imaged with X-ray computed tomography

Cementum, the tissue attaching mammal tooth roots to the periodontal ligament, grows appositionally throughout life, displaying a series of circum-annual incremental features. These have been studied for decades as a direct record of chronological lifespan. The majority of previous studies on cementum have used traditional thin-section histological methods to image and analyse increments. However, several caveats have been raised in terms of studying cementum increments in thin-sections. Firstly, the limited number of thin-sections and the two-dimensional perspective they impart provide an incomplete interpretation of cementum structure, and studies often struggle or fail to overcome complications in increment patterns that complicate or inhibit increment counting. Increments have been repeatedly shown to both split and coalesce, creating accessory increments that can bias increment counts. Secondly, identification and counting of cementum increments using human vision is subjective, and it has led to inaccurate readings in several experiments studying individuals of known age. Here, we have attempted to optimise a recently introduced imaging modality for cementum imaging; X-ray propagation-based phase-contrast imaging (PPCI). X-ray PPCI was performed for a sample of rhesus macaque (Macaca mulatta) lower first molars (n=10) from a laboratory population of known age. A new method for semi-automatic incrementcounting was then integrated into a purpose-built software package for studying cementum increments. Comparison with data from conventional cementochronology, based on histological examination of tissue sections, confirmed that X-ray PPCI reliably records cementum increments. Validation of the increment counting algorithm suggests that it is robust and provides accurate estimates of increment counts. In summary, we show that our new increment counting method has the potential to overcome caveats of conventional cementochronology approaches, when used to analyse 3D images provided by X-ray PPCI.

ecology↗

bioRxiv2020

The transcriptome of regenerating zebrafish scales identifies genes involved in human bone disease

Zebrafish scales are mineralised plates that can regenerate involving de novo bone formation. This presents an opportunity to uncover genes and pathways relevant to human musculoskeletal disease relevant to impaired bone formation. To investigate this hypothesis, we defined transcriptomic profiles of ontogenetic and regenerating scales, and identified 604 differentially expressed genes (DEGs) that were enriched for extracellular matrix, ossification, and cell adhesion pathways. Next, we showed that human orthologues of DEGs were 2.8 times more likely to cause human monogenic skeletal diseases (P<8x10-11), and they showed enrichment for human orthologues associated with polygenetic disease traits including stature, bone density and osteoarthritis (P<0.005). Finally, zebrafish mutants of two human orthologues that were robustly associated with height and osteoarthritis (COL11A2) or bone density only (SPP1) developed skeletal abnormalities consistent with our genetic association studies. Col11a2Y228X/Y228X mutants showed endoskeletal features consistent with abnormal growth and osteoarthritis, whereas spp1P160X/P160X mutants had elevated bone density (P<0.05). In summary, we show that transcriptomic studies of regenerating zebrafish scales have potential to identify new genes and pathways relevant to human skeletal disease.

genetics↗

bioRxiv2020

Wnt16 Elicits a Protective Effect Against Fractures and Supports Bone Repair in Zebrafish

Bone homeostasis is a dynamic, multicellular process which is required throughout life to maintain bone integrity, prevent fracture and respond to skeletal damage. WNT16 has been linked to bone fragility and osteoporosis in humans, as well as functional haematopoiesis of leukocytes in vivo, but the mechanisms by which it promotes bone health and repair are not fully understood. We used CRISPR-Cas9 to generate mutant zebrafish lacking Wnt16 (wnt16-/-) to study its effect on bone dynamically. wnt16 mutants displayed variable tissue mineral density and were susceptible to spontaneous fractures and the accumulation of bone calluses at an early age. Fractures were induced in the lepidotrichia of the caudal fins of wnt16-/- and wild type (WT) zebrafish; this model was used to probe the mechanisms by which Wnt16 regulates skeletal and immune cell-dynamics in vivo. wnt16 mutants repaired fractures more slowly compared to WT zebrafish. Osteoblast cell number was reduced at the fracture site 4 days post-injury in wnt16 mutants, coinciding with prolonged activation of the canonical Wnt signalling pathway. Surprisingly, we found no evidence that the recruitment of innate immune cells to fractures was altered in wnt16 mutants. This study highlights zebrafish as an emerging model for functionally validating osteoporosis-associated genes and investigating fracture repair dynamically in vivo. Using this model, we demonstrate that Wnt16 protects against fracture and is likely to support bone repair by attenuating the activation of the canonical Wnt signalling pathway to facilitate osteoblast recruitment and bone matrix deposition.

cell biology↗

bioRxiv2019

Reptile-like physiology in Early Jurassic stem-mammals

There is uncertainty regarding the timing and fossil species in which mammalian endothermy arose, with few studies of stem-mammals on key aspects of endothermy such as basal or maximum metabolic rates, or placing them in the context of living vertebrate metabolic ranges. Synchrotron X-ray imaging of incremental tooth cementum shows two Early Jurassic stem-mammals, Morganucodon and Kuehneotherium, had lifespans (a basal metabolic rate proxy) considerably longer than comparably sized living mammals, but similar to reptiles, and that Morganucodon had femoral blood flow rates (a maximum metabolic rate proxy) intermediate between living mammals and reptiles. This shows maximum metabolic rates increased evolutionarily before basal rates, and that contrary to previous suggestions of a Triassic origin, Early Jurassic stem-mammals lacked the endothermic metabolism of living mammals.One Sentence Summary Surprisingly long lifespans and low femoral blood flow suggest reptile-like physiology in key Early Jurassic stem-mammals.View Full Text

paleontology↗