Biology subjects

Limbert, G.

Publications and source records attributed to Limbert, G..

4 recordsLinked to original sources

bioRxiv2023

Rapid flapping and fiber-reinforced membrane wings are key to high-performance bat flight

Bats fly using significantly different wing motions than other fliers, stemming from the complex interplay of their membrane wings motion and structural properties. Biological studies show that many bats fly at Strouhal numbers, the ratio of flapping to flight speed, 50-150% above the range typically associated with optimal locomotion. We use high-resolution fluid-structure interaction simulations of a bat wing to independently study the role of kinematics and material/structural properties on aerodynamic performance and show that peak propulsive and lift efficiencies for a bat-like wing motion require flapping 66% faster than for a symmetric motion, agreeing with the increased flapping frequency observed in zoological studies. In addition, we find that reduced membrane stiffness is associated with improved propulsive efficiency until the membrane flutters, but that incorporating microstructural anisotropy arising from biological fiber reinforcement enables a tenfold reduction of the flutter energy whilst maintaining high aerodynamic efficiency. Our results indicate that animals with specialized flapping motions may have correspondingly specialized flapping speeds, in contrast to arguments for a universally efficient Strouhal range. Additionally, our study demonstrates the significant role that the microstructural constitutive properties of the membrane wing of a bat can have on its propulsive performance.

biophysics↗

bioRxiv2020

Micromechanical homogenisation of a hydrogel-filled electrospun scaffold for tissue-engineered epicardial patching of the infarcted heart

This study aimed at developing a formulation to link microscopic structure and macroscopic mechanics of a fibrous scaffold filled with a hydrogel for use as a tissue-engineered patch for local epicardial support of the infarcted heart. Mori-Tanaka mean field homogenisation, closed-cell foam mechanics and finite element (FE) methods were used to represent the macroscopic elastic modulus of the filled fibrous scaffold. The homogenised constitutive description of the scaffold was implemented for an epicardial patch in a FE model of a human cardiac left ventricle (LV) to assess effects of patching on myocardial mechanics and ventricular function in presences of an infarct. The macroscopic elastic modulus of the scaffold was predicted to be 0.287 MPa with the FE method and 0.290 MPa with the closed-cell model for the realistic fibre structure of the scaffold, and 0.108 and 0.540 MPa with mean field homogenization for randomly oriented and completely aligned fibres. Epicardial patching was predicted to reduce maximum myocardial stress in the infarcted LV from 19 kPa (no patch) to 9.5 kPa (patch), and to increase the ventricular ejection fraction from 40% (no patch) to 43% (patch). The predictions of the macroscopic elastic modulus of the realistic scaffold with the FE and the closed-cell model agreed well, and were bound by the mean field homogenisation prediction for random and fully aligned fibre orientation of the scaffold. This study demonstrates the feasibility of homogenization techniques to represent complex multiscale structural features in an simplified but meaningful manner.

bioengineering↗

bioRxiv2019

Electrospun polyester-urethane scaffold preserves mechanical properties and exhibits strain stiffening during in situ tissue ingrowth and degradation

Consistent mechanical performance from implantation through healing and scaffold degradation is highly desired for tissue-regenerative scaffolds, e.g. when used for vascular grafts. The aim of this study was the paired in vivo mechanical assessment of biostable and fast degrading electrospun polyester-urethane scaffolds to isolate the effects of material degradation and tissue formation after implantation. Biostable and degradable polyester-urethane scaffolds with substantial fibre alignment were manufactured by electrospinning. Scaffold samples were implanted paired in subcutaneous position in rats for 7, 14 and 28 days. Morphology, mechanical properties and tissue ingrowth of the scaffolds were assessed before implantation and after retrieval. Tissue ingrowth after 28 days was 83 {+/-} 10% in the biostable scaffold and 77 {+/-} 4% in the degradable scaffold. For the biostable scaffold, the elastic modulus at 12% strain increased significantly between 7 and 14 days and decreased significantly thereafter in fibre but not in cross-fibre direction. The degradable scaffold exhibited a significant increase in the elastic modulus at 12% strain from 7 to 14 days after which it did not decrease but remained at the same magnitude, both in fibre and in cross-fibre direction. Considering that the degradable scaffold loses its material strength predominantly during the first 14 days of hydrolytic degradation (as observed in our previous in vitro study), the consistency of the elastic modulus of the degradable scaffold after 14 days is an indication that the regenerated tissue construct retains it mechanical properties.

bioengineering↗

bioRxiv2019

Tissue ingrowth markedly reduces mechanical anisotropy and stiffness in fibre direction of highly aligned electrospun polyurethane scaffolds

PurposeThe lack of long-term patency of synthetic vascular grafts currently available on the market has directed research towards improving the performance of small diameter grafts. Improved radial compliance matching and tissue ingrowth into the graft scaffold are amongst the main goals for an ideal vascular graft. MethodsBiostable polyurethane scaffolds were manufactured by electrospinning and implanted in subcutaneous and circulatory positions in the rat for 7, 14 and 28 days. Scaffold morphology, tissue ingrowth, and mechanical properties of the scaffolds were assessed before implantation and after retrieval. ResultsTissue ingrowth after 24 days was 96.5 {+/-} 2.3% in the subcutaneous implants and 77.8 {+/-} 5.4% in the circulatory implants. Over the 24 days implantation, the elastic modulus at 12% strain decreased by 59% in direction of the fibre alignment whereas it increased by 1379% transverse to the fibre alignment of the highly aligned scaffold of the subcutaneous implants. The lesser aligned scaffold of the circulatory graft implants exhibited an increase of the elastic modulus at 12% strain by 77% in circumferential direction. ConclusionBased on the observations, it is proposed that the mechanism underlying the softening of the highly aligned scaffold in the predominant fibre direction is associated with scaffold compaction and local displacement of fibres by the newly formed tissue. The stiffening of the scaffold, observed transverse to highly aligned fibres and for more a random fibre distribution, represents the actual mechanical contribution of the tissue that developed in the scaffold.

bioengineering↗