Biology subjects

Lemiere, J.

Publications and source records attributed to Lemiere, J..

9 recordsLinked to original sources

bioRxiv2026

Nuclear size and physical properties of the nucleoplasm are determined by colloid osmotic pressure at the nuclear envelope

The size of the nucleus scales with cell size, suggesting a universal scaling rule. Yet the biophysical determinants of nuclear size and the significance and consequences of altered nuclear-to-cell (N/C) ratios, which are observed across diverse pathological states and cell-fate transitions, remain poorly understood. Recent theoretical models propose that nuclear size arises from a balance of colloid osmotic pressures generated by macromolecules in the nucleoplasm and cytoplasm. Here we demonstrate that altering this osmotic balance through massive overexpression of an exogenous protein targeted to either the nucleoplasm or cytoplasm produces predictable changes in the N/C ratio in S. pombe. These quantitative perturbations show that nuclear size is set primarily by the number of proteins in the nucleus and cytoplasm, providing strong support for a pure osmotic pressure mechanism. Furthermore, cells with altered N/C ratios display tunable changes in nucleoplasmic crowding, nuclear condensate formation, nucleolar scaling and heterochromatin organization, establishing a causal link between nuclear size and gene regulatory processes. These findings reveal how cells exploit osmotic forces to set organelle dimensions, with broad implications for understanding how nuclear size shapes gene expression and cell identity in health and disease.

biophysics↗

bioRxiv2025

Analyses of bent spindles reveal the mechanics of anaphase B in fission yeast

The mitotic spindle in the fission yeast Schizosaccharomyces pombe is a single bundle of microtubules which elongates to segregate the chromosomes during anaphase B. The mechanical properties of the spindle and the forces driving its elongation remain poorly defined. Here, we analyzed how spindles react to mechanical and genetic perturbations to uncover their mechanical properties. Treatment of cells with osmotic oscillations and blue light led to a consistent phenotype of spindle buckling and breakage in mid-anaphase. The stalling of pole separation and reduced rates of spindle elongation indicated that spindles elongate and buckle under increased mechanical load. The structural integrity of the bent spindles was dependent on Ase1 (PRC1), while the spindle elongation rate was dependent on motor proteins Klp9 (kinesin-6) and Cut7 (kinesin-5). Modeling of bent spindle shapes revealed that most spindles behave mechanically as a beam with a two-fold increase in rigidity in the midzone. Upon reaching a threshold size, bent spindles broke at a specific fragile site near the edge of the spindle midzone. Our findings in this simple fission yeast spindle are relevant to the mechanics of more complex metazoan spindles. Significance statementO_LIThe anaphase B spindle in S. pombe consists of a microtubule bundle that elongates to move the chromosomes apart. The various forces and mechanical properties of the spindle remain poorly quantified. C_LIO_LIThe authors establish a method to induce spindle buckling in mid-anaphase. Time-lapse imaging shows that these spindles elongate at reduced rates, buckle as a non-homogeneous beam under mechanical load, and break at a fragile site adjacent to the midzone. C_LIO_LIThese results provide quantitative and molecular insights into spindle force regulation and structural integrity that are relevant to mitosis in other cell types. C_LI

cell biology↗

bioRxiv2024

Phosphorylation of HP1/Swi6 relieves competition with Suv39/Clr4 on nucleosomes and enables H3K9 trimethyl spreading.

Heterochromatin formation in Schizosaccharomyces pombe requires the spreading of histone 3 (H3) Lysine 9 (K9) methylation (me) from nucleation centers by the H3K9 methylase, Suv39/Clr4, and the reader protein, HP1/Swi6. To accomplish this, Suv39/Clr4 and HP1/Swi6 have to associate with nucleosomes both nonspecifically, binding DNA and octamer surfaces and specifically, via recognition of methylated H3K9 by their respective chromodomains. However, how both proteins avoid competition for the same nucleosomes in this process is unclear. Here, we show that phosphorylation tunes oligomerization and the nucleosome affinity of HP1/Swi6 such that it preferentially partitions onto Suv39/Clr4s trimethyl product rather than its unmethylated substrates. Preferential partitioning enables efficient conversion from di-to trimethylation on nucleosomes in vitro and H3K9me3 spreading in vivo. Together, our data suggests that phosphorylation of HP1/Swi6 creates a regime that increases oligomerization and relieves competition with the "read-write" mechanism of Suv39/Clr4, together promoting for productive heterochromatin spreading.

molecular biology↗

bioRxiv2024

Quantitative Comparison of Monomeric StayGold Variants Using Protein Nanocages in Living Cells

To standardize comparison of fluorescent proteins and independently determine which monomeric StayGold variant is best for live microscopy, we analyzed fluorescent protein tagged I3-01 peptides that self-assemble into stable sixty subunit dodecahedrons inside live cells. We find mStayGold is 3-fold brighter and 3-fold more photostable compared with EGFP and superior to other monomeric variants in mammalian cytoplasm. In addition, analysis of intracellular nanocage diffusion confirms the monomeric nature of mStayGold.

cell biology↗

bioRxiv2021

Control of nuclear size by osmotic forces in Schizosaccharomyces pombe

The size of the nucleus scales robustly with cell size so that the nuclear-to-cell volume ratio (N/C ratio) is maintained during cell growth in many cell types. The mechanism responsible for this scaling remains mysterious. Previous studies have established that the N/C ratio is not determined by DNA amount but is instead influenced by factors such as nuclear envelope mechanics and nuclear transport. Here, we developed a quantitative model for nuclear size control based upon colloid osmotic pressure and tested key predictions in the fission yeast Schizosaccharomyces pombe. This model posits that the N/C ratio is determined by the numbers of macromolecules in the nucleoplasm and cytoplasm. Osmotic shift experiments showed that the fission yeast nucleus behaves as an ideal osmometer whose volume is primarily dictated by osmotic forces. Inhibition of nuclear export caused accumulation of macromolecules and an increase in crowding in the nucleoplasm, leading to nuclear swelling. We further demonstrated that the N/C ratio is maintained by a homeostasis mechanism based upon synthesis of macromolecules during growth. These studies demonstrate the functions of colloid osmotic pressure in intracellular organization and size control.

biophysics↗

bioRxiv2021

nucGEMs probe the biophysical properties of the nucleoplasm

The cell interior is highly crowded and far from thermodynamic equilibrium. This environment can dramatically impact molecular motion and assembly, and therefore influence subcellular organization and biochemical reaction rates. These effects depend strongly on length-scale, with the least information available at the important mesoscale (10-100 nanometers), which corresponds to the size of crucial regulatory molecules such as RNA polymerase II. It has been challenging to study the mesoscale physical properties of the nucleoplasm because previous methods were labor-intensive and perturbative. Here, we report nuclear Genetically Encoded Multimeric nanoparticles (nucGEMs). Introduction of a single gene leads to continuous production and assembly of protein-based bright fluorescent nanoparticles of 40 nm diameter. We implemented nucGEMs in budding and fission yeast and in mammalian cell lines. We found differences in particle motility between the nucleus and the cytosol at the mesoscale, that mitotic chromosome condensation ejects nucGEMs from the nucleus, and that nucGEMs are excluded from heterochromatin and the nucleolus. nucGEMs enable hundreds of nuclear rheology experiments per hour, and allow evolutionary comparison of the physical properties of the cytosol and nucleoplasm.

biophysics↗

bioRxiv2020

Cytoplasm Biophysical Properties Madolute Microtubule Dynamics

The cytoplasm is a crowded, visco-elastic environment whose physical properties change according to physiological or developmental states. How the physical properties of the cytoplasm impact cellular functions in vivo remain poorly understood. Here, we probed the effects of cytoplasmic concentration on microtubules by applying osmotic shifts to fission yeast, moss, and mammalian cells. We show that both the rates of microtubule polymerization and depolymerization scale linearly and inversely with cytoplasmic concentration; an increase in cytoplasmic concentration decreases the rates of microtubule polymerization and depolymerization proportionally, while a decrease in cytoplasmic concentration leads to the opposite. Numerous lines of evidence indicate that these effects are due to changes in cytoplasmic viscosity rather than cellular stress responses or macromolecular crowding per se. We reconstituted these effects on microtubules in vitro by tuning viscosity. Our findings indicate that, even in normal conditions, the viscosity of cytoplasm modulates the reactions underlying microtubule dynamic behaviors.

cell biology↗

bioRxiv2019

Actin modulates shape and mechanics of tubular membranes

The actin cytoskeleton shapes cells and also organizes internal membranous compartments. In particular, it interacts with membranes in intracellular transport of material in mammalian cells, yeast or plant cells. Tubular membrane intermediates, pulled along microtubule tracks, are involved during these processes, and destabilize into vesicles. While the role of actin in this destabilization process is still debated, literature also provide examples of membranous structures stabilization by actin. To directly address this apparent contradiction, we mimic the geometry of tubular intermediates with preformed membrane tubes. The growth of an actin sleeve at the tube surface is monitored spatio-temporally. Depending on network cohesiveness, actin is able to stabilize, or maintain membrane tubes under pulling. Indeed, on a single tube, thicker portions correlate with the presence of actin. Such structures relax over several minutes, and may provide enough time and curvature geometries for other proteins to act on tube stability.

biophysics↗

bioRxiv2018

Adaptation of actin dynamics and membrane tension control for yeast endocytosis

During clathrin-mediated endocytosis in eukaryotes, actin assembly is required to overcome large membrane tension and turgor pressure. However, the molecular mechanisms by which the actin machinery adapts to varying membrane tension remain unknown. In addition, how cells reduce their membrane tension when they are challenged by hypotonic shocks remains unclear. We used quantitative microscopy to demonstrate that cells rapidly reduce their membrane tension using three parallel mechanisms. In addition to using their cell wall for mechanical protection, yeast cells disassemble eisosomes to buffer moderate changes in membrane tension on a minute time scale. Meanwhile, a temporary reduction of the rate of endocytosis for 2 to 6 minutes, and an increase in the rate of exocytosis for at least 5 minutes allow cells to add large pools of membrane to the plasma membrane. We built on these results to submit the cells to abrupt increases in membrane tension and determine that the endocytic actin machinery of fission yeast cells rapidly adapts to perform clathrin-mediated endocytosis. Our study sheds light on the tight connection between membrane tension regulation, endocytosis and exocytosis.

cell biology↗