bioRxiv Science⌕ Search

Biology subjects

Karlsson, B.

Publications and source records attributed to Karlsson, B..

9 recordsLinked to original sources

Teasing apart the joint effect of demography and natural selection in the birth of a contact zone

Vast population movements induced by recurrent climatic cycles have shaped the genetic structure of plant species. This is especially true in Scandinavia that was repeatedly glaciated. During glacial periods trees were confined to refugia, south and east of the ice sheet, from which they recolonized Scandinavia as the ice melted away. This multi-pronged recolonization led to large contact zones in most species. We leverage large genomic data from 5000 trees to reconstruct the demographic history of Norway spruce (Picea abies) and test for the presence of natural selection during the recolonization process and the establishment of the contact zone. Sweden is today made up of two large genetic clusters, a southern one originating from the Baltics and a Northern one originating from Northern Russia. The contact zone delineating these two clusters closely matches the limit between two major climatic regions. This suggests that natural selection contributed to the establishment and the maintenance of the contact zone. To test this hypothesis we first used Approximate Bayesian Computation; an Isolation-with migration model with genome-wide linked selection fits the data better than a purely neutral one. Secondly, we identified loci characterized by both extreme allele frequency differences between geographic regions and association to the variables defining the climatic zones. These loci, many of which are related to phenology, form clusters present on all linkage groups. Altogether, the current genetic structure reflects the joint effect of climatic cycles, recolonization and selection on the establishment of strong local adaptation and contact zones. Significance StatementUnderstanding how past climatic events, human actions and evolutionary forces contributed to the present distribution of genetic diversity is crucial to predict their reaction to the current climate crisis. Vast distribution shifts induced by past environmental changes, local ecological processes, natural selection and human transfers contributed to the current distribution of Norway spruce across Northern Europe. Genome-wide polymorphisms from thousands of individuals show that Scandinavia was recolonized after the Last Glacial from both south and north. This two-pronged recolonization established a contact zone between two genetic clusters that matches the limit between two major climate zones. The contact zone is shaped and maintained by natural selection on a large number of loci that form blocks of co-adapted loci spread genome-wide.

evolutionary biology↗

Effect of number of annual rings and tree ages on genomic predictive ability for solid wood properties of Norway spruce

Genomic selection (GS) or genomic prediction is considered as a promising approach to accelerate tree breeding and increase genetic gain by shortening breeding cycle, but the efforts to develop routines for operational breeding are so far limited. We investigated the predictive ability (PA) of GS based on 484 progeny trees from 62 half-sib families in Norway spruce (Picea abies (L.) Karst.) for wood density, modulus of elasticity (MOE) and microfibril angle (MFA) measured with SilviScan, as well as for measurements on standing trees by Pilodyn and Hitman instruments. GS predictive abilities were comparable with those based on pedigree-based prediction. The highest PAs were reached with at least 80-90% of the dataset used as training set. Use of different statistical methods had no significant impact on the estimated PAs. We also compared the abilities to predict density, MFA and MOE of 19 year old trees with models trained on data from coring at different ages and to different depths into the stem. 78-95% of the maximal PAs obtained from coring to the pith at high age were reached by using data possible to obtain by drilling 3-5 rings towards the pith at tree age 10-12, thereby shortening the cycle and reducing the impact on the tree.

plant biology↗

Genetic control of tracheid properties in Norway spruce wood

[tpltrtarr] Through the use of genome-wide association (GWAS) mapping it is possible to establish the genetic basis of phenotypic trait variation. Our GWAS study presents the first such an effort in Norway spruce (Picea abies (L). Karst.) for the traits related to wood tracheid characteristics.\n[tpltrtarr]The study employed an exome capture genotyping approach that generated 178 101 high quality Single Nucleotide Polymorphisms (SNPs) from 40 018 probes within a population of 517 Norway spruce mother trees. We applied a LASSO based association mapping method using a functional multi-locus mapping approach that utilizes latent traits, with a stability selection probability method as the hypothesis testing approach to determine significant Quantitative Trait Loci (QTLs). Expression of the identified candidate genes was examined using publicly available spruce databases.\n[tpltrtarr]The analysis have provided 31 loci and 26 mostly novel candidate genes, majority of which showing specific expression in wood-forming tissues or high ubiquitous expression, potentially controlling tracheids dimensions, their cell wall thickness and microfibril angle. Among most promising candidates, the analysis identified Picea abies BIG GRAIN 2 (PabBG2) with predicted function in auxin transport and sensitivity, and MA_373300g0010 - similar to wall-associated receptor kinases (WAKs), both associated to cell wall thickness.\n[tpltrtarr]The results demonstrate feasibility of GWAS to identify novel candidate genes controlling industrially-relevant tracheid traits in Norway spruce. The presence of many traits with several significant QTLs supports the notion that the majority of these traits are polygenic in nature.

genetics↗

Assessing the potential for assisted gene flow using past introduction of Norway spruce in Southern Sweden: Local adaptation and genetic basis of quantitative traits in trees.

Norway spruce (Picea abies) is a dominant conifer species of major economic importance in Northern Europe. Extensive breeding programs were established to improve phenotypic traits of interest. In southern Sweden seeds used to create progeny tests were collected on about 3000 trees of outstanding phenotype (\"plus\" trees) across the region. Some were of local origin but many were recent introductions from the rest of the natural range. The mixed origin of the trees together with partial sequencing of the exome of >1,500 of these trees and phenotypic data retrieved from the Swedish breeding program offered us a unique opportunity to dissect the genetic basis of local adaptation of three quantitative traits (height, diameter and budburst). Through a combination of multivariate analyses and genome-wide association studies, we showed that there was a very strong effect of geographical origin on growth (height and diameter) and phenology (budburst) with trees from southern origins outperforming local provenances. Association studies also indicated that growth traits were highly polygenic and budburst somewhat less. Hence, our results suggest that assisted gene flow and genomic selection approaches could help alleviating the effect of climate change on P. abies breeding programs in Sweden.

evolutionary biology↗

Genomic data provides new insights on the demographic history and the extent of recent material transfers in Norway spruce

Primeval forests are today exceedingly rare in Europe and transfer of forest reproductive material for afforestation and improvement have been very common, especially over the last two centuries. This can be a serious impediment when inferring past population movements in response to past climate changes such as the last glacial maximum (LGM), some 18,000 years ago. In the present study, we genotyped 1,672 individuals from three Picea species (P. abies, P. obovata, and P. omorika) at 400K SNPs using exome capture to infer the past demographic history of Norway spruce and estimate the amount of recent introduction used to establish the Norway spruce breeding program in Southern Sweden. Most of these trees belong to P. abies and originate from the base population of the Swedish breeding program. Others originate from populations across the natural ranges of the three species. Of the 1,499 individuals stemming from the breeding program, a large proportion corresponds to recent introductions. The split of P. omorika occurred 23 million years ago (mya), while the divergence between P. obovata and P. abies began 17.6 mya. Demographic inferences retrieved the same main clusters within P. abies than previous studies, i.e. a vast northern domain ranging from Norway to central Russia, where the species is progressively replaced by Siberian spruce (P. obovata) and two smaller domains, an Alpine domain, and a Carpathian one, but also revealed further subdivision and gene flow among clusters. The three main domains divergence was ancient (15 mya) and all three went through a bottleneck corresponding to the LGM. Approximately 17% of P. abies Nordic domain migrated from P. obovata ~103K years ago, when both species had much larger effective population sizes. Our analysis of genome-wide polymorphism data thus revealed the complex demographic history of Picea genus in Western Europe and highlighted the importance of material transfer in Swedish breeding program.

evolutionary biology↗

Genetic control of transition from juvenile to mature wood with respect to microfibril angle (MFA) in Norway spruce (Picea abies) and lodgepole pine (Pinus contorta)

Genetic control of microfibril angle (MFA) transition from juvenile to mature was evaluated in Norway spruce and lodgepole pine. Increment cores were collected at breast height from 5,618 trees in two 21-year-old Norway spruce progeny trials in southern Sweden, and from 823 trees in two 34-35 - year-old lodgepole pine progeny trials in northern Sweden. Radial variations in MFA from pith to bark were measured for each core using SilviScan. To estimate MFA transition from juvenile to mature, a threshold level of MFA 20{degrees} was considered and six different regression functions were fitted to the MFA profile of each tree after exclusion of outliers, following three steps. The narrow-sense heritability estimates (h2) obtained for MFA transition were highest based on the slope function, ranging from 0.21 to 0.23 for Norway spruce and from 0.34 to 0.53 for lodgepole pine, while h2 were mostly non-significant based on the logistic function, under all exclusion methods. Results of this study indicate that it is possible to select for an earlier MFA transition from juvenile to mature in Norway spruce and lodgepole pine selective breeding programs, as the genetic gains ({triangleup}G) obtained in direct selection of this trait were very high in both species.

genomics↗

Accuracy of genomic selection for growth and wood quality traits in two control-pollinated progeny trials using exome capture as genotyping platform in Norway spruce

BackgroundGenomic selection (GS) can increase genetic gain by reducing the length of breeding cycle in forest trees. Here we genotyped 1370 control-pollinated progeny trees from 128 full-sib families in Norway spruce (Picea abies (L.) Karst.), using exome capture as a genotyping platform. We used 116,765 high quality SNPs to develop genomic prediction models for tree height and wood quality traits. We assessed the impact of different genomic prediction methods, genotype-by-environment interaction (GxE), genetic composition, size of the training and validation set, relatedness, and the number of SNPs on the accuracy and predictive ability (PA) of GS.\n\nResultsUsing G matrix slightly altered heritability estimates relative to pedigree-based method. GS accuracies were about 11-14% lower than those based on pedigree-based selection. The efficiency of GS per year varied from 1.71 to 1.78, compared to that of the pedigree-based model if breeding cycle length was halved using GS. Height GS accuracy decreased more than 30% using one site as training for GS prediction to the second site, indicating that GxE for tree height should be accommodated in model fitting. Using half-sib family structure instead of full-sib led a significant reduction in GS accuracy and PA. The full-sib family structure only needed 750 makers to reach similar accuracy and PA as 100,000 markers required for half-sib family, indicating that maintaining the high relatedness in the model improves accuracy and PA. Using 4000-8000 markers in full-sib family structure was sufficient to obtain GS model accuracy and PA for tree height and wood quality traits, almost equivalent to that obtained with all makers.\n\nConclusionsThe study indicates GS would be efficient in reducing generation time of a breeding cycle in conifer tree breeding program that requires a long-term progeny testing. Sufficient number of trees within-family (16 for growth and 12 for wood quality traits) and number of SNPs (8000) are required for GS with full-sib family relationship. GS methods had little impact on GS efficiency for growth and wood quality traits. GS model should incorporate G x E effect when a strong GxE is detected.

genetics↗

Genetic analysis using parent-progeny relationship for wood quality traits in Norway spruce (Picea abies (L.) Karst.)

Two-generations pedigree involving 524 plus trees and their open-pollinated (OP) progenies were jointly studied to estimate parent-progeny correlation and heritability. Three wood traits (wood density, MFA, and MOE) were determined by SilviS-can in one ramet per plus tree and 12 OP progenies. Three ramets per plus tree and 12 OP were also measured with two indirect methods, Pilodyn and Hitman. The overall correlation between OP-based breeding values and plus tree-based phenotypes was low to moderate for all traits. The correlations between the phenotypic values of the mother trees and the breeding values estimated on their half-sib pro-genies are low to moderate. Reasons for this may be experimental errors in progeny trials and lack of experimental design in archives, contributing to the parent and progeny correlation. The management practices in the archive may contribute more to such low correlation. Offspring progeny heritability estimates based on SilviScan measurements were higher than parent-offspring regression using one single ramet from the archive. Moreover, when three ramets were measured the parent-offspring regression heritability estimates were higher than those based solely on progeny data for the Pilodyn and Hitman on the standing trees. The standard error of the heritability estimates decreased with increasing progeny size.

plant biology↗

Association mapping identified novel candidate loci affecting wood formation in Norway spruce

[tpltrtarr] Norway spruce (Picea abies) is an important boreal forest tree species of significant ecological and economic importance. Hence there is a strong imperative to dissect the genetics controlling important wood quality traits in the species.\n[tpltrtarr]We performed a functional genome-wide association mapping of 17 wood traits in Norway spruce using 178101 single-nucleotide polymorphisms (SNPs) generated from exome genotyping of 517 mother trees. The wood traits were defined using functional modelling of wood properties across annual growth rings.\n[tpltrtarr]Association mapping was performed using a multilocus LASSO penalized regression method and we detected a total of 51 significant SNPs from 39 candidate genes that are involved in wood formation.\n[tpltrtarr]Our study represents the first functional multi-locus genome-wide association mapping (AM) in Norway spruce. The results advance our understanding of the genetics influencing wood traits, identify novel candidate genes for further functional studies and support current Norway spruce breeding efforts.

genetics↗