Biology subjects

Jons, C. K.

Publications and source records attributed to Jons, C. K..

16 recordsLinked to original sources

bioRxiv2026

Structure-Property-Performance Engineering of Hydrogel Depots for Long-Acting Peptide Delivery

Controlled release systems for subcutaneous peptide delivery often exhibit a pronounced initial burst release followed by inadequate maintenance of therapeutic exposure, limiting depot lifetime and increasing pharmacokinetic variability. Here, we engineer a dynamic, injectable hydrogel depot technology for months-long delivery of lipidated peptides. Using semaglutide as a model, we establish a modular formulation framework integrating: (i) formulation-driven tuning of depot mechanics to control release kinetics, (ii) cargo complexation strategies leveraging hydrophobic and multivalent ion-mediated interactions, and (iii) oxidative stabilization through sacrificial antioxidant excipients. We evaluated depot performance by rheology, in vitro cargo release, and in vivo pharmacokinetic and pharmacodynamic studies in rodents. Optimized formulations sustained semaglutide exposure for over six weeks from a single administration with two-fold reduction in peak-to-trough exposure and comparable total bioavailability relative to daily dosing, resulting in improved glucose control, weight regulation, and preservation of pancreatic islet content. These results suggest potential for quarterly dosing in humans. Together, this work establishes integrated and generalizable structure-property-performance relationships that account for cargo-matrix and cargo-excipient interactions across burst, diffusion, and erosion regimes to inform a practical formulation framework for engineering long-acting depots for sustained peptide delivery.

bioengineering↗

bioRxiv2025

Intranasal sertraline for the investigation of nose-to-brain delivery to mitigate systemic exposure

Antenatal depression, or depression during pregnancy, is a common psychiatric disorder and poses significant risks to both the mother and the fetus. Despite these risks, it is frequently left untreated due to fears of side effects caused by antidepressant medications which cross through the placental barrier. It is therefore desirable to develop formulation strategies to mitigate systemic exposure to relevant drug molecules while maintaining their psychotropic efficacy. In this work, we develop formulations of sertraline, a common antidepressant, to target delivery to the brain through intranasal administration. Formulation engineering enables successful solubilization of sertraline at high concentrations and our lead formulation remains stable at room temperature for months. Using mice, we compare sertraline biodistribution following intranasal administration and standard oral administration. Intranasal administration of our drug product candidate provides comparable brain exposure at half the dose compared to oral treatment and lowers the maximum plasma exposure. These findings suggest that intranasal administration may provide selectivity for drug exposure in the central nervous system over systemic exposure.

pharmacology and toxicology↗

bioRxiv2025

Long-acting hydrogel-based depot formulations of tirzepatide and semaglutide for the management of type 2 diabetes and weight

Several incretin hormone therapies have been clinically approved and have revolutionized the treatment of diabetes and obesity. Promising therapeutics include semaglutide (Ozempic(R) and Wegovy(R)), an agonist for glucagon-like peptide-1 (GLP-1) receptor, and tirzepatide (Mounjaro(R)), a dual agonist for GLP-1 and glucose-dependent insulinotropic polypeptide (GIP) receptors. These molecules help to regulate blood glucose levels, enhance insulin secretion and sensitivity, and reduce appetite. Currently, these treatments require weekly injections, which can be challenging for patients to adhere to. We recently reported the development of an injectable hydrogel depot technology enabling months-long release of semaglutide (Sema). Here, we further develop this technology for improved prolonged release of both Sema and tirzepatide (TZP). In a rat model of diabetes, we show a single administration of hydrogel-based formulations of either Sema or TZP maintained relevant drug levels for over 6 weeks. In these studies, single administrations of long-acting hydrogel-based therapies of Sema or TZP were similarly effective at regulating blood glucose and weight compared to daily injections of either Sema or TZP in standard aqueous vehicles. This hydrogel depot technology is easy to manufacture, injectable, and exhibits excellent biocompatibility, enabling months-long-acting treatments with the potential to improve management of diabetes and weight.

bioengineering↗

bioRxiv2025

Engineering Sustained-Release Broadly Neutralizing Antibody Formulations

Sustained serum levels of broadly neutralizing antibodies (bnAbs) are crucial for effective passive immunization against infectious diseases as protection persists only while these bnAbs remain at adequate concentrations within the body. Current obstacles, such as poor pharmacokinetics (PK) and burdensome administration, must be overcome to make bnAbs a viable option for pre- and post-exposure prophylaxis. In this work, we explore how a polymer-nanoparticle (PNP) hydrogel depot technology can be engineered to prolong protein delivery. In-vivo studies in mice and rats demonstrate prolonged protein release, and modeling efforts predict the impact of both the elimination half-life of the active pharmaceutical ingredient and hydrogel depot volume on overall pharmacokinetics. Moreover, flow cytometry characterization reveals that immune cell infiltration into the hydrogel depot can result in faster-than-expected release of antibody cargo on account of active transport via cellular uptake. We then demonstrate that co-formulation of antibodies with an anti-inflammatory agent reduces cellular infiltration and resulting active transport, further extending delivery and pharmacokinetics. Finally, multicompartmental modeling predicts the human PK profiles of clinically relevant HIV bnAbs delivered via subcutaneous hydrogel injection. These findings aid in the development of next generation hydrogel materials that stabilize and slowly release bnAbs for long-term pre-exposure immunoprophylaxis.

bioengineering↗

bioRxiv2025

Preventing peritendinous adhesions using lubricious supramolecular hydrogels

Of the 1.5 million emergency room visits each year in the United States due to flexor tendon injuries in the hand, over 30-40% result in peritendinous adhesions which can limit range of motion (ROM) and severely impact an individuals quality of life. Adhesions are fibrous scar-like tissues which can form between adjacent tissues in the body in response to injury, inflammation, or during normal healing following surgery. Currently, there is no widespread solution for adhesion prevention in the delicate space of the digit while allowing a patient full ROM quickly after surgery. There is a clear clinical need for a material capable of limiting adhesion formation which is simple to apply, does not impair healing, remains at the application site during motion and initial inflammation (days - weeks), and leaves tendon glide unencumbered. In this work, we developed dynamically crosslinked, bioresorbable supramolecular hydrogels as easy-to-apply lubricious barriers to prevent the formation of peritendinous adhesions. These hydrogels exhibit excellent long-term stability, injectability, and thermally stable viscoelastic properties that allow for simple storage and facile application. We evaluated interactions at the interface of the hydrogels and relevant tissues, including human tendon and skin, in shear and extensional stress modes and demonstrated a unique mechanism of adhesion prevention based on maintenance of a lubricious hydrogel barrier between tissues. Ex vivo studies show that the hydrogels did not impair the gliding behavior nor mechanical properties of tendons when applied in cadaveric human hands following clinically relevant flexor tendon repair. We further applied these hydrogels in a preclinical rat Achilles tendon injury model and observed prolonged local retention at the repair site as well as improved recovery of key functional metrics, including ROM and maximal dorsiflexion. Further, these hydrogels were safe and did not impair tendon strength nor healing compared to the current standard of care. These dynamic, biocompatible hydrogels present a novel solution to the significant problem of peritendinous adhesions with clear translational potential.

bioengineering↗

bioRxiv2024

Sustained exposure to multivalent antigen-decorated nanoparticles generates broad anti-coronavirus responses

The threat of future coronavirus pandemics requires developing cost-effective vaccine technologies that provide broad and long-lasting protection against diverse circulating and emerging strains. Here we report a multivalent liposomal hydrogel depot vaccine technology comprising the receptor binding domain (RBD) of up to four relevant SARS and MERS coronavirus strains non-covalently displayed on the surface of the liposomes within the hydrogel structure. The multivalent presentation and sustained exposure of RBD antigens improved the potency, neutralizing activity, durability, and consistency of antibody responses across homologous and heterologous coronavirus strains in a naive murine model. When administrated in animals previously exposed to the wild-type SARS-CoV-2 antigens, liposomal hydrogels elicited durable antibody responses against the homologous SARS and MERS strains for over 6 months and elicited neutralizing activity against the immune-evasive SARS-CoV-2 variant Omicron BA.4/BA.5. Overall, the tunable antigen-decorated liposomal hydrogel platform we report here generates robust and durable humoral responses across diverse coronaviruses, supporting global efforts to effectively respond to future viral outbreaks. Progress and PotentialRapidly mutating infectious diseases such as influenza, HIV, and COVID-19 pose serious threats to human health. Yet, most vaccines still do not mount durable protection against mutagenic viruses and fail to induce broad responses to protect against emergent strains. Materials approaches to vaccine design, such as employing sustained delivery approaches or decorating nanoparticle constructs with multiple antigens, have shown promise in improving the breadth and potency of vaccines. Yet, these approaches typically require cumbersome chemistries and have not been explored in pre-exposed populations over clinically relevant time scales. Here, we report the development of an injectable liposomal hydrogel depot technology capable of prolonged presentation of multiple coronavirus antigens non-covalently coordinated on the surface of the liposomes forming the hydrogel structure. These hydrogels improve the potency, durability and breadth of vaccine response and are easy to fabricate, enabling the rapid design of next generation vaccines that confer protection against rapidly evolving pandemics.

bioengineering↗

bioRxiv2024

A thiol--ene click-based strategy to customize injectable polymer--nanoparticle hydrogel properties for therapeutic delivery

Polymer-nanoparticle (PNP) hydrogels are a promising injectable biomaterial platform that has been used for a wide range of biomedical applications including adhesion prevention, adoptive cell delivery, and controlled drug release. By tuning the chemical, mechanical, and erosion properties of injected hydrogel depots, additional control over cell compatibility and pharmaceutical release kinetics may be realized. Here, we employ thiol-ene click chemistry to prepare a library of modified hydroxypropylmethylcellulose (HPMC) derivatives for subsequent use in PNP hydrogel applications. When combined with poly(ethylene glycol)-b-poly(lactic acid) nanoparticles, we demonstrate that systematically altering the hydrophobic, steric, or pi stacking character of HPMC modifications can readily tailor the mechanical properties of PNP hydrogels. Additionally, we highlight the compatibility of the synthetic platform for the incorporation of cysteine-bearing peptides to access PNP hydrogels with improved bioactivity. Finally, through leveraging the tunable physical properties afforded by this method, we show hydrogel retention time in vivo can be dramatically altered without sacrificing mesh size or cargo diffusion rates. This work offers a route to optimize PNP hydrogels for a variety of translational applications and holds promise in the highly tunable delivery of pharmaceuticals and adoptive cells.

bioengineering↗

bioRxiv2024

Polyacrylamide-based Antimicrobial Copolymers Immune to Typical Resistance Mechanisms to Replace or Rescue Antibiotics

Antibiotics save countless lives each year and have dramatically improved human health outcomes since their introduction in the 20th century. Unfortunately, bacteria are now developing resistance to antibiotics at an alarming rate, with many new strains of "superbugs" showing simultaneous resistance to multiple classes of antibiotics. To mitigate the global burden of antimicrobial resistance, we must develop new antibiotics that are broadly effective, safe, and highly stable for the purpose of global access. In this manuscript, we report the development of polyacrylamide-based copolymers as a novel class of broad-spectrum antibiotics with efficacy against several critical pathogens. We demonstrate that these copolymer drugs are selective for bacteria over mammalian cells, indicating a favorable safety profile. We show that they kill bacteria through a membrane disruption mechanism, which allows them to overcome traditional mechanisms of antimicrobial resistance. Finally, we demonstrate their ability to rehabilitate an existing small-molecule antibiotic that is highly subject to resistance development by improving its potency and eliminating the development of resistance in a combination treatment. This work represents a significant step towards combatting antimicrobial resistance.

bioengineering↗

bioRxiv2024

Glassy Surfactants Enable Ultra-High Concentration Biologic Therapeutics

Protein therapeutics, like peptides and antibodies, have become critical to healthcare. Despite their exceptional potency and specificity, biopharmaceuticals are prone to aggregation, often necessitating low formulation concentrations as well as cold storage and distribution to maintain stability. Yet, high doses are required to treat many diseases. To achieve these doses, most approved protein drug products are administered intravenously, imposing excessive burdens on patients and the healthcare system. New approaches are needed to formulate proteins at high concentrations to enable less burdensome subcutaneous injection, preferably in an autoinjector format. To address this challenge, we report a subcutaneously injectable biotherapeutic delivery platform composed of spray-dried protein microparticles suspended in a non-solvent liquid carrier. These microparticles contain only active biopharmaceutical agent and a high glass transition temperature polyacrylamide-derived copolymer excipient affording several key benefits over traditional excipients, including: (i) improved stabilization of biopharmaceuticals through the spray drying process, and (ii) improved morphology and properties of the spray-dried particles, enhancing suspension injectability. Experiments with albumin and antibodies demonstrate that this technology enables ultra-high-concentration protein formulations (exceeding 500 mg/mL) that are injectable through standard needles with clinically relevant injection forces. Additionally, experiments in mice with two clinically relevant antibody drugs show these ultra-high- concentration formulations reduce required injection volumes without altering pharmacokinetics or efficacy. This approach could nearly triple the number of commercial protein drugs amenable to subcutaneous administration, dramatically reducing burden and improving access to these critical biopharmaceuticals. One Sentence SummaryHere we leverage a unique copolymer excipient to enable ultra-high concentration protein formulations with improved stability and amenable to subcutaneous injection that can reduce patient burden, lower costs, and improve access to critical drugs.

bioengineering↗

bioRxiv2024

Generation of an inflammatory niche in an injectable hydrogel depot through recruitment of key immune cells improves efficacy of mRNA vaccines

Messenger RNA (mRNA) delivered in lipid nanoparticles (LNPs) rose to the forefront of vaccine candidates during the COVID-19 pandemic due in part to scalability, adaptability, and potency. Yet there remain critical areas for improvements of these vaccines in durability and breadth of humoral responses. In this work, we explore a modular strategy to target mRNA/LNPs to antigen presenting cells with an injectable polymer-nanoparticle (PNP) hydrogel depot technology which recruits key immune cells and forms an immunological niche in vivo. We characterize this niche on a single cell level and find it is highly tunable through incorporation of adjuvants like MPLAs and 3M-052. Delivering commercially available SARS-CoV-2 mRNA vaccines in PNP hydrogels improves the durability and quality of germinal center reactions, and the magnitude, breadth, and durability of humoral responses. The tunable immune niche formed within PNP hydrogels effectively skews immune responses based on encapsulated adjuvants, creating opportunities to precisely modulate mRNA/LNP vaccines for various indications from infectious diseases to cancers.

bioengineering↗

bioRxiv2024

Sustained vaccine exposure elicits more rapid, consistent, and broad humoral immune responses to multivalent influenza vaccines

With the ever-present threat of pandemics, it is imperative we develop vaccine technologies eliciting broad and durable immunity to high-risk pathogens. Yet, current annual influenza vaccines, for example, fail to provide robust immunity against the 3-4 homologous strains they contain, let alone heterologous strains. Herein, we demonstrate that sustained delivery of multivalent influenza vaccines from an injectable polymer-nanoparticle (PNP) hydrogel technology induces more rapid, consistent, and potent humoral immune responses against multiple homologous viruses, as well as potent responses against heterologous viruses and potential pandemic subtypes H5N1, H7N9 and H9N2. Further, admixing PNP hydrogels with commercial influenza vaccines results in stronger hemagglutination inhibition against both heterologous and homologous viruses. We show this enhanced potency and breadth arises from higher affinity antibodies targeting both the hemagglutinin stem and head. Overall, this simple and effective sustained delivery platform for multivalent annual influenza vaccines generates durable, potent, and remarkably broad immunity to influenza.

bioengineering↗

bioRxiv2023

Saponin Nanoparticle Adjuvants Incorporating Toll-Like Receptor Agonists Improve Vaccine Immunomodulation

Over the past few decades, the development of potent and safe immune-activating adjuvant technologies has become the heart of intensive research in the constant fight against highly mutative and immune evasive viruses such as influenza, SARS-CoV-2, and HIV. Herein, we developed a highly modular saponin-based nanoparticle platform incorporating toll-like receptor agonists (TLRas) including TLR1/2a, TLR4a, TLR7/8a adjuvants and their mixtures. These various TLRa-SNP adjuvant constructs induce unique acute cytokine and immune-signaling profiles, leading to specific Th-responses that could be of interest depending on the target disease for prevention. In a murine vaccine study, the adjuvants greatly improved the potency, durability, breadth, and neutralization of both COVID-19 and HIV vaccine candidates, suggesting the potential broad application of these adjuvant constructs to a range of different antigens. Overall, this work demonstrates a modular TLRa-SNP adjuvant platform which could improve the design of vaccines for and dramatically impact modern vaccine development. TeaserSaponin-TLRa nanoadjuvants provide distinct immune signatures and drive potent, broad, durable COVID-19 and HIV vaccine responses.

bioengineering↗

bioRxiv2023

Sustained Delivery of GLP-1 Receptor Agonists from Injectable Biomimetic Hydrogels Improves Treatment of Diabetes

Glucagon-like peptide-1 (GLP-1) is an incretin hormone and neurotransmitter secreted from intestinal L-cells in response to nutrients to stimulate insulin and block glucagon secretion in a glucose-dependent manner. GLP-1 in itself is rapidly degraded, but long-acting GLP-1 receptor agonists (GLP-1 RAs) have become central in the treatment of T2D because of the beneficial effects extending also beyond glucose control. Currently, these therapeutics must be injected either daily or weekly or taken daily orally, leaving room for technological innovations that enable less frequent administrations, which will reduce patient burden and increase patient compliance. An ideal GLP-1 RA drug product would provide continuous therapy for upwards of four months from a single administration to match the cadence with which T2D patients typically visit their physician. In this work, we leveraged an injectable hydrogel depot technology to develop a long-acting GLP-1 RA drug product. By modulating the hydrogel properties to tune GLP-1 RA retention within the hydrogel depot, we engineered formulations capable of months-long GLP-1 RA delivery. Using a rat model of T2D, we confirmed that a single injection of hydrogel-based therapies exhibits sustained exposure of GLP-1 RA over 42 days, corresponding to a once-every four month therapy in humans. Moreover, these hydrogel therapies maintained optimal management of blood glucose and weight comparable to daily injections of a leading GLP-1 RA drug molecule. The pharmacokinetics and pharmacodynamics of these hydrogel-based long-acting GLP-1 RA treatments are promising for development of novel therapies reducing treatment burden for more effective management of T2D. Progress and PotentialWhile insufficient access to quality healthcare is problematic for consistent management of Type II diabetes (T2D), poor adherence to burdensome treatment regimens is one of the greatest challenges for disease management. Glucagon-like peptide 1 (GLP1) drugs have become central to the treatment of T2D due to their many beneficial effects beyond improving glucose control. Unfortunately, while optimization of GLP1 drugs has reduced treatment frequency from daily to weekly, significant patient burden still leads to poor patience compliance. In this work we developed an injectable hydrogel technology to enable GLP1 drugs only requiring administration once every four months. We showed in a rat model of T2D that one injection of a hydrogel-based therapy improves management of blood glucose and weight when compared with daily injections of the leading drug used clinically. These hydrogel-based GLP1 treatments are promising for reducing treatment burden and more effectively managing T2D. Future ImpactA GLP-1-based drug product providing four months of continuous therapy per administration could be transformational for the management of Type II diabetes (T2D). One of the most challenging aspects of diabetes management with GLP-1 mimics is maintenance of consistent levels of the drugs in the body, which is complicated by poor patient compliance on account of the high frequency of dosing required for current treatments. By leveraging a unique sustained release hydrogel depot technology we develop a months-long GLP-1 drug product candidate that has the potential to reduce patient burden and improving diabetes management. Overall, the hydrogel technology we describe here can dramatically reduce the frequency of therapeutic interventions, significantly increasing patient quality of life and reducing complications of diabetes management. Our next steps will focus on optimization of the drug formulations in a swine model of T2D, which is the most advanced and translationally-relevant animal model for these types of therapeutics. The long-term vision for this work is to translate lead candidate drug products towards clinical evaluation, which will also require comprehensive safety evaluation in multiple species and manufacturing our these materials according to Good Manufacturing Practices. The months-long-acting GLP-1 drug product that will come from this work has the potential to afford thus far unrealized therapeutic impact for the hundreds of millions of people with diabetes worldwide.

bioengineering↗

bioRxiv2022

Subcutaneous delivery of an antibody against SARS-CoV-2 from a supramolecular hydrogel depot

Prolonged maintenance of therapeutically-relevant levels of broadly neutralizing antibodies (bnAbs) is necessary to enable passive immunization against infectious disease. Unfortunately, protection only lasts for as long as these bnAbs remain present at a sufficiently high concentration in the body. Poor pharmacokinetics and burdensome administration are two challenges that need to be addressed in order to make pre- and post-exposure prophylaxis with bnAbs feasible and effective. In this work, we develop a supramolecular hydrogel as an injectable, subcutaneous depot to encapsulate and deliver antibody drug cargo. This polymer-nanoparticle (PNP) hydrogel exhibits shear-thinning and self-healing properties that are required for an injectable drug delivery vehicle. In vitro drug release assays and diffusion measurements indicate that the PNP hydrogels prevent burst release and slow the release of encapsulated antibodies. Delivery of bnAbs against SARS-CoV-2 from PNP hydrogels is compared to standard routes of administration in a preclinical mouse model. We develop a multi-compartment model to understand the ability of these subcutaneous depot materials to modulate the pharmacokinetics of released antibodies; the model is extrapolated to explore the requirements needed for novel materials to successfully deliver relevant antibody therapeutics with different pharmacokinetic characteristics.

bioengineering↗

bioRxiv2022

Yield Stress and Creep Control Depot Formation and Persistence of Injectable Hydrogels Following Subcutaneous Administration

Hydrogels that can be injected into the body using standard needles or catheters enable a minimally invasive strategy to prolong local delivery of therapeutic drug and cellular cargo. In particular, physically crosslinked hydrogels exhibit shear-thinning and self-healing behaviors enabling facile injectability and depot formation upon administration. While prior efforts to characterize these systems have focused on injectability and cargo release behaviors, prediction of cargo release in the body often assumes the materials form a depot rather than spreading out upon administration. Here, we evaluate how hydrogel rheology correlates with depot formation and persistence following subcutaneous administration in mice with two physicochemically-distinct, physically crosslinked hydrogel systems. We evaluate calcium-alginate and polymer-nanoparticle hydrogel systems exhibiting variable mechanical behaviors across several rheological properties (stiffness, viscoelasticity, yield stress, and creep). By relating measured rheological properties to depot formation and persistence time following subcutaneous administration, we identify that yield stress is predictive of initial depot formation while creep is predictive of depot persistence. Indeed, only materials with yield stresses greater than 25 Pa form robust depots and reduced creep correlates with longer depot persistence. These findings provide predictive insights into design considerations for hydrogel technologies capable of extended controlled release of therapeutic cargo.

bioengineering↗

bioRxiv2021

Delivery of CAR-T Cells in a Transient Injectable Stimulatory Hydrogel Niche Improves Treatment of Solid Tumors

Adoptive cell therapy (ACT) has proven to be highly effective in treating blood cancers such as B cell malignancies, but traditional approaches to ACT are poorly effective in treating the multifarious solid tumors observed clinically. Locoregional cell delivery methods have shown promising results in treating solid tumors compared to standard intravenous delivery methods, but the approaches that have been described to date have several critical drawbacks ranging from complex manufacturing and poor modularity to challenging adminstration. In this work, we develop a simple-to-implement self-assembled and injectable hydrogel material for the controlled co-delivery of CAR-T cells and stimulatory cytokines that improves treatment of solid tumors. We evaluate a range of hydrogel formulations to optimize the creation of a transient inflammatory niche that affords sustained exposure of CAR-T cells and cytokines. This facile approach yields increased CAR-T cell expansion, induces a more tumor-reactive CAR-T phenotype, and improves efficacy in treating solid tumors in mice.

bioengineering↗