Biology subjects

Hsia, Y.

Publications and source records attributed to Hsia, Y..

At least 19 recordsLinked to original sources

bioRxiv2026

Discovering and designing multistate protein assemblies

Evolved protein assemblies exploit multiple weak interfaces to package cargo, facilitate metabolism, and direct cell movement, often through architectures that depart from strict geometric symmetry. Designed protein assemblies can also break symmetry through conformational flexibility or strain-based defects, but have generally lacked the capacity for large-scale structural rearrangements characteristic of evolved systems. Here, we characterize the structures and biophysical properties of emergent protein assemblies and establish a strategy for designing quasisymmetric materials that switch between assembly states. Rather than relying on intrinsic flexibility, our approach programs multiple self-assembling interfaces onto rigid oligomers. Using multistate design and ensemble predictions, we generate assemblies in which protomers can adopt alternative designed interface modes, enabling identical amino acid sequences to form distinct configurations depending on assembly pathway and environmental conditions. As a proof of principle, we construct quasisymmetric capsids that transition into micron-scale 2D arrays in response to temperature. This work establishes a strategy for encoding alternative assembly geometries within a single protein sequence and provides a foundation for engineering materials with environmentally tunable properties.

biochemistry↗

bioRxiv2026

Programmable De Novo Design of Mesoporous Protein Crystal Frameworks

Three-dimensional protein crystals are ordered, porous macroscopic materials with potential applications in catalysis, biosensing, and biomedicine. However, most protein crystals are obtained by empirical screening, providing limited control over the lattice architecture, pore geometry or component composition that determine material function. Here, we present a modular strategy for the programmable design of highly porous, framework-like protein crystals using predefined protein-protein interactions. This strategy yielded over 30 distinct protein crystals, including single-component and multicomponent P213 and I213 lattices that grow to over 100 micrometers in size. Small-angle X-ray scattering and electron microscopy showed close agreement between experimental lattices and computational models. RFdiffusion-guided design generated isomorphous variants with matched lattice parameters, enabling coherent protein crystal alloys, epitaxial core-shell growth and reversible shell assembly. The designed crystals exhibit tunable mesoporous architectures, with limiting apertures of 2-18 nm, and support genetically encoded incorporation of fluorescent protein guests. These results establish a general route to programmable lattice engineering of protein crystals and position them as genetically encoded, compositionally tunable mesoporous materials.

synthetic biology↗

bioRxiv2026

De novo design of autocatalytically forming intra- and intermolecular isopeptide bonds to construct rigid covalent protein assemblies

Isopeptide bonds are amide bonds between amino acid side chains that can form autocatalytically, notably in the pili of Gram-positive bacteria. Here, we design de novo proteins that form both intramolecular and intermolecular isopeptide bonds entirely autocatalytically. We report over 50 designs that form isopeptide bonds, validated by mass spectrometry and 5 crystal structures. We redesign these constructs as split proteins that form a covalent intermolecular isopeptide crosslink when combined. These split designs are orthogonal to the existing isopeptide-based SpyTag/Catcher system, and their formation can be regulated by temperature, providing control over the timing of crosslinking in protein assemblies. We extend these designs to create rigid domain crosslinks that enable the construction of large well ordered symmetric rings of up to 215 kDa that are irreversibly covalently crosslinked by multiple isopeptide bonds into a single molecule. Our results provide insight into the determinants of isopeptide bond formation, considerably expand the set of isopeptide bond crosslinking systems, and establish a framework to construct fully covalent rigid protein assemblies.

biophysics↗

bioRxiv2026

De novo design of selective kinase modulators

Protein kinases are critical regulators of cellular signaling, but precise modulation of their activity remains challenging due to their high structural conservation. Here, we present de novo designed genetically encoded miniproteins capable of activating or inhibiting focal adhesion kinase (FAK) by directly targeting the kinase domain itself. Among 96 binders designed to stabilize distinct conformational states of FAK, 33 modulated kinase activity. Biochemical characterization of the four most potent modulators revealed that two designs inhibit FAK with low-nanomolar IC50 values while the remaining two potentiated FAK activity by more than two-fold. When expressed in cells, the modulators preserved the same inhibitory and activating effects observed in vitro, establishing that designed conformational binders can directly tune FAK signaling in living cells. Taking advantage of the high similarity between kinases, we redesigned the FAK inhibitors to inhibit Src kinase. Our approach establishes a versatile platform for selective and genetically encoded kinase control as a way to rewire cell signaling and as a starting point for the discovery of novel modulatory sites of kinases.

biochemistry↗

bioRxiv2026

Controlling metal-carbonate phase, form, and function through de novo protein design

Biomineralization enables living systems to construct hybrid materials by controlling the location, orientation, and polymorph of inorganic crystals with proteins and other biomolecules. Despite decades of study, the molecular principles underlying these processes remain difficult to harness in engineered materials, in part because native biomineralization proteins are often intrinsically disordered, heterogeneous, or insoluble. Here we show that de novo designed protein interfaces can be assembled into reconfigurable two-dimensional arrays which template calcite nanocrystals. By fine-tuning RFdiffusion2 on repeat protein scaffolds, we further enable the design of protein architectures which selectively form aragonite, a metastable polymorph of calcium carbonate, in nucleation conditions that otherwise result in a mixture of phases. Extending beyond inorganics found in biological systems, we show that lattice-matched protein designs template cobalt carbonate formation: a flat helical repeat protein interface promotes unconfined growth, whereas soluble D3 cage assemblies yield more homogenous cobalt carbonate nanocrystals confined to the interior of the cage. These protein-cage cobalt carbonate hybrid materials function as electrocatalysts for alkaline water splitting. Our results demonstrate the potential of deep learning-based methods to unlock the structural and functional activity of protein-mineral composites.

biochemistry↗

bioRxiv2025

De novo design of RNA and nucleoprotein complexes

Nucleic acids fold into sequence-dependent tertiary structures and carry out diverse biological functions, much like proteins. However, while considerable advances have been made in the de novo design of protein structure and function, the same has not yet been achieved for RNA tertiary structures of similar intricacy. Here, we describe a generative diffusion framework, RFDpoly, for generalized de novo biopolymer (RNA, DNA and protein) design, and use it to create diverse and designable RNA structures. We design RNA structures with novel folds and experimentally validate them using a combination of chemical footprinting (SHAPE-seq) and electron microscopy. We further use this approach to design protein-nucleic acid assemblies; the crystal structure of one such design is nearly identical to the design model. This work demonstrates that the principles of structure-based de novo protein design can be extended to nucleic acids, opening the door to creating a wide range of new RNA structures and protein-nucleic acid complexes.

biochemistry↗

bioRxiv2025

De-novo design of a random protein walker

Molecular machines hold great potential. Design of static monomeric and oligomeric protein structures has advanced tremendously, but few dynamic protein systems have been designed. Here we present the design and characterization of a random protein walker that diffuses along a designed protein track. For the track, we designed micro-meter long fibres and developed a method to rigidly decorate them with arbitrary proteins. The walkers consist of homo-oligomers that reversibly bind the track using heterodimeric feet; we tested multiple heterodimer interfaces for reversibility and designed six walkers with different numbers of feet. Cryo-EM experiments confirmed the structure of the track and walkers. We performed detailed single molecule tracking and kinetics characterisation and found that the walkers with more feet diffuse along the track faster. The system represents a tuneable starting point for future powered protein molecular robots.

synthetic biology↗

bioRxiv2024

Bond-centric modular design of protein assemblies

We describe a modular bond-centric approach to protein nanomaterial design inspired by the rich diversity of chemical structures that can be generated from the small number of atomic valencies and bonding interactions. We design protein building blocks with regular coordination geometries and bonding interactions that enable the assembly of a wide variety of closed and opened nanomaterials using simple geometrical principles. Experimental characterization confirms successful formation of more than twenty multi-component polyhedral protein cages, 2D arrays, and 3D protein lattices, with a high (10-50 %) success rate and electron microscopy data closely matching the corresponding design models. Because of the modularity, individual building blocks can assemble with different partners to generate distinct regular assemblies, resulting in an economy of parts and enabling the construction of reconfigurable systems.

biochemistry↗

bioRxiv2023

Hierarchical design of pseudosymmetric protein nanoparticles

Discrete protein assemblies ranging from hundreds of kilodaltons to hundreds of megadaltons in size are a ubiquitous feature of biological systems and perform highly specialized functions 1-3. Despite remarkable recent progress in accurately designing new self-assembling proteins, the size and complexity of these assemblies has been limited by a reliance on strict symmetry 4,5. Inspired by the pseudosymmetry observed in bacterial microcompartments and viral capsids, we developed a hierarchical computational method for designing large pseudosymmetric self-assembling protein nanomaterials. We computationally designed pseudosymmetric heterooligomeric components and used them to create discrete, cage-like protein assemblies with icosahedral symmetry containing 240, 540, and 960 subunits. At 49, 71, and 96 nm diameter, these nanoparticles are the largest bounded computationally designed protein assemblies generated to date. More broadly, by moving beyond strict symmetry, our work represents an important step towards the accurate design of arbitrary self-assembling nanoscale protein objects.

bioengineering↗

bioRxiv2023

Design of four component T=4 tetrahedral, octahedral, and icosahedral protein nanocages through programmed symmetry breaking

Four, eight or twenty C3 symmetric protein trimers can be arranged with tetrahedral (T-sym), octahedral (O-sym) or icosahedral (I-sym) point group symmetry to generate closed cage-like structures1,2. Generating more complex closed structures requires breaking perfect point group symmetry. Viruses do this in the icosahedral case using quasi-symmetry or pseudo-symmetry to access higher triangulation number architectures3-9, but nature appears not to have explored higher triangulation number tetrahedral or octahedral symmetries. Here, we describe a general design strategy for building T = 4 architectures starting from simpler T = 1 structures through pseudo-symmetrization of trimeric building blocks. Electron microscopy confirms the structures of T = 4 cages with 48 (T-sym), 96 (O-sym), and 240 (I-sym) subunits, each with four distinct chains and six different protein-protein interfaces, and diameters of 33nm, 43nm, and 75nm, respectively. Higher triangulation number viruses possess very sophisticated functionalities; our general route to higher triangulation number nanocages should similarly enable a next generation of multiple antigen displaying vaccine candidates10,11 and targeted delivery vehicles12,13.

biochemistry↗

bioRxiv2023

Blueprinting expandable nanomaterials with standardized protein building blocks

A wooden house frame consists of many different lumber pieces, but because of the regularity of these building blocks, the structure can be designed using straightforward geometrical principles. The design of multicomponent protein assemblies in comparison has been much more complex, largely due to the irregular shapes of protein structures1. Here we describe extendable linear, curved, and angled protein building blocks, as well as inter-block interactions that conform to specified geometric standards; assemblies designed using these blocks inherit their extendability and regular interaction surfaces, enabling them to be expanded or contracted by varying the number of modules, and reinforced with secondary struts. Using X-ray crystallography and electron microscopy, we validate nanomaterial designs ranging from simple polygonal and circular oligomers that can be concentrically nested, up to large polyhedral nanocages and unbounded straight "train track" assemblies with reconfigurable sizes and geometries that can be readily blueprinted. Because of the complexity of protein structures and sequence-structure relationships, it has not been previously possible to build up large protein assemblies by deliberate placement of protein backbones onto a blank 3D canvas; the simplicity and geometric regularity of our design platform now enables construction of protein nanomaterials according to "back of an envelope" architectural blueprints.

biochemistry↗

bioRxiv2023

De novo design of modular protein hydrogels with programmable intra- and extracellular viscoelasticity

Relating the macroscopic properties of protein-based materials to their underlying component microstructure is an outstanding challenge. Here, we exploit computational design to specify the size, flexibility, and valency of de novo protein building blocks, as well as the interaction dynamics between them, to investigate how molecular parameters govern the macroscopic viscoelasticity of the resultant protein hydrogels. We construct gel systems from pairs of symmetric protein homo-oligomers, each comprising 2, 5, 24, or 120 individual protein components, that are crosslinked either physically or covalently into idealized step-growth biopolymer networks. Through rheological assessment and molecular dynamics (MD) simulation, we find that the covalent linkage of multifunctional precursors yields hydrogels whose viscoelasticity depends on the crosslink length between the constituent building blocks. In contrast, reversibly crosslinking the homo-oligomeric components with a computationally designed heterodimer results in non-Newtonian biomaterials exhibiting fluid-like properties under rest and low shear, but shear-stiffening solid-like behavior at higher frequencies. Exploiting the unique genetic encodability of these materials, we demonstrate the assembly of protein networks within living mammalian cells and show via fluorescence recovery after photobleaching (FRAP) that mechanical properties can be tuned intracellularly, in correlation with matching formulations formed extracellularly. We anticipate that the ability to modularly construct and systematically program the viscoelastic properties of designer protein-based materials could have broad utility in biomedicine, with applications in tissue engineering, therapeutic delivery, and synthetic biology. SignificanceProtein-based hydrogels have many applications in cellular engineering and medicine. Most genetically encodable protein hydrogels are made from naturally harvested proteins or protein-polymer hybrid constructs. Here we describe de novo protein hydrogels and systematically investigate the impact of microscopic properties of the building blocks (e.g., supramolecular interaction, valencies, geometries, flexibility) on the resultant macroscopic gel mechanics, both intra-and extracellularly. These de novo supramolecular protein assemblies, whose properties can be tuned from solid gels to non-Newtonian fluids, provide expanded opportunities for applications in synthetic biology and medicine.

bioengineering↗

bioRxiv2022

Accurate Computational Design of 3D Protein Crystals

Protein crystallization plays a central role in structural biology1, with broad impact2 in pharmaceutical formulation3, drug delivery4, biosensing5, and biocatalysis6,7. Despite this importance, the process of protein crystallization remains poorly understood and highly empirical8-10, with largely unpredictable crystal contacts, lattice packing arrangements, and space group preferences, and the programming of protein crystallization through precisely engineered sidechain-sidechain interactions across multiple protein-protein interfaces is an outstanding challenge. Here we develop a general computational approach to designing three-dimensional (3D) protein crystals with pre-specified lattice architectures at atomic accuracy that hierarchically constrains the overall degree of freedoms (DOFs) of the system. We use the approach to design three pairs of oligomers that can be individually purified, and upon mixing, spontaneously self-assemble into large 3D crystals (>100 m). Small-angle X-ray scattering and X-ray crystallography show these crystals are nearly identical to the computational design models, with the design target F4132 and I432 space groups and closely corresponding overall architectures and protein-protein interfaces. The crystal unit cell dimensions can be systematically redesigned while retaining space group symmetry and overall architecture, and the crystals are both extremely porous and highly stable, enabling the robust scaffolding of inorganic nanoparticle arrays. Our approach thus enables the computational design of protein crystals with high accuracy, and since both structure and assembly are encoded in the primary sequence, provides a powerful new platform for biological material engineering.

synthetic biology↗

bioRxiv2022

Fast and versatile sequence-independent protein docking for nanomaterials design using RPXDock

Computationally designed multi-subunit assemblies have shown considerable promise for a variety of applications, including a new generation of potent vaccines. One of the major routes to such materials is rigid body sequence-independent docking of cyclic oligomers into architectures with point group or lattice symmetries. Current methods for docking and designing such assemblies are tailored to specific classes of symmetry and are difficult to modify for novel applications. Here we describe RPXDock, a fast, flexible, and modular software package for sequence-independent rigid-body protein docking across a wide range of symmetric architectures that is easily customizable for further development. RPXDock uses an efficient hierarchical search and a residue-pair transform (RPX) scoring method to rapidly search through multidimensional docking space. We describe the structure of the software, provide practical guidelines for its use, and describe the available functionalities including a variety of score functions and filtering tools that can be used to guide and refine docking results towards desired configurations. Author SummaryProtein design methodologies are now able to generate, through a stepwise approach, a wide variety of self-assembling protein structures that begin to rival the structural complexity of naturally occurring protein nanomachines. Efficient methods for docking oligomeric protein building blocks in user-defined target symmetries are central to these techniques. We developed RPXDock as a fast and versatile method to systematically dock pre-existing proteins together into a multitude of asymmetrical and symmetrical architectures. RPXdock is also readily extendable to future applications through the addition of new symmetries, score functions, and filtering criteria.

bioengineering↗

bioRxiv2022

Improving the secretion of designed protein assemblies through negative design of cryptic transmembrane domains

Computationally designed protein nanoparticles have recently emerged as a promising platform for the development of new vaccines and biologics. For many applications, secretion of designed nanoparticles from eukaryotic cells would be advantageous, but in practice they often secrete poorly. Here we show that designed hydrophobic interfaces that drive nanoparticle assembly are often predicted to form cryptic transmembrane domains, suggesting that interaction with the membrane insertion machinery could limit efficient secretion. We develop a general computational protocol, the Degreaser, to design away cryptic transmembrane domains without sacrificing protein stability. Retroactive application of the Degreaser to previously designed nanoparticle components and nanoparticles considerably improves secretion, and modular integration of the Degreaser into design pipelines results in new nanoparticles that secrete as robustly as naturally occurring protein assemblies. Both the Degreaser protocol and the novel nanoparticles we describe may be broadly useful in biotechnological applications.

biochemistry↗

bioRxiv2021

Computational design of nanoscale rotational mechanics in de novo protein assemblies

Natural nanomachines like the F1/F0-ATPase contain protein components that undergo rotation relative to each other. Designing such mechanically constrained nanoscale protein architectures with internal degrees of freedom is an outstanding challenge for computational protein design. Here we explore the de novo construction of protein rotary machinery from designed axle and ring components. Using cryoelectron microscopy, we find that axle-ring systems assemble as designed and populate diverse rotational states depending on symmetry match or mismatch and the designed interface energy landscape. These mechanical systems with internal rotational degrees of freedom are a step towards the systematic design of genetically encodable nanomachines. One-Sentence SummaryComputationally designed self-assembling protein rotary machines sample internal degrees of freedom sculpted within the energy landscape.

synthetic biology↗

bioRxiv2021

Reconfigurable asymmetric protein assemblies through implicit negative design

Asymmetric multi-protein complexes that undergo subunit exchange play central roles in biology, but present a challenge for protein design. The individual components must contain interfaces enabling reversible addition to and dissociation from the complex, but be stable and well behaved in isolation. Here we employ a set of implicit negative design principles to generate beta sheet mediated heterodimers which enable the generation of a wide variety of structurally well defined asymmetric assemblies. Crystal structures of the heterodimers are very close to the design models, and unlike previously designed orthogonal heterodimer sets, the subunits are stable, folded and monomeric in isolation and rapidly assemble upon mixing. Rigid fusion of individual heterodimer halves to repeat proteins yields central assembly hubs that can bind two or three different proteins across different interfaces. We use these connectors to assemble linearly arranged hetero-oligomers with up to 6 unique components, branched hetero-oligomers, closed C4-symmetric two-component rings, and hetero-oligomers assembled on a cyclic homo-oligomeric central hub, and demonstrate such complexes can readily reconfigure through subunit exchange. Our approach provides a general route to designing asymmetric reconfigurable protein systems.

synthetic biology↗

bioRxiv2020

Hierarchical design of multi-scale protein complexes by combinatorial assembly of oligomeric helical bundle and repeat protein building blocks

A goal of de novo protein design is to develop a systematic and robust approach to generating complex nanomaterials from stable building blocks. Due to their structural regularity and simplicity, a wide range of monomeric repeat proteins and oligomeric helical bundle structures have been designed and characterized. Here we describe a stepwise hierarchical approach to building up multi-component symmetric protein assemblies using these structures. We first connect designed helical repeat proteins (DHRs) to designed helical bundle proteins (HBs) to generate a large library of heterodimeric and homooligomeric building blocks; the latter have cyclic symmetries ranging from C2 to C6. All of the building blocks have repeat proteins with accessible termini, which we take advantage of in a second round of architecture guided rigid helical fusion (WORMS) to generate larger symmetric assemblies including C3 and C5 cyclic and D2 dihedral rings, a tetrahedral cage, and a 120 subunit icosahedral cage. Characterization of the structures by small angle x-ray scattering, x-ray crystallography, and cryo-electron microscopy demonstrates that the hierarchical design approach can accurately and robustly generate a wide range of macromolecular assemblies; with a diameter of 43nm, the icosahedral nanocage is the largest structurally validated designed cage to date. The computational methods and building block sets described here provide a very general route to new de novo designed symmetric protein nanomaterials.

biochemistry↗