Biology subjects

Cvancara, P.

Publications and source records attributed to Cvancara, P..

4 recordsLinked to original sources

bioRxiv2023

Biomimetic computer-to-brain communication restoring naturalistic touch sensations via peripheral nerve stimulation

Artificial communication with the brain through peripheral nerve stimulation recently showed promising results in people with sensorimotor deficits. However, these efforts fall short in delivering close-to-natural rich sensory experience, resulting in the necessity to propose novel venues for converting sensory information into neural stimulation patterns, which would possibly enable intuitive and natural sensations. To this aim, we designed and tested a biomimetic neurostimulation framework inspired by nature, able "to write" physiologically plausible information back into the residual healthy nervous system. Starting from the in-silico model of mechanoreceptors, we designed biomimetic policies of stimulation, emulating the activity of different afferent units. Then, we experimentally assessed these novel paradigms, alongside mechanical touch and commonly used, linear neuromodulations. We explored the somatosensory neuroaxis by stimulating the nerve while recording the neural responses at the dorsal root ganglion and spinal cord of decerebrated cats. Biomimetic stimulation resulted in a neural activity that travels consistently along the neuroaxis, producing the spatio-temporal neural dynamic more like the naturally evoked one. Finally, we then implemented these paradigms within the bionic device and tested it with patients. Biomimetic neurostimulations resulted in higher mobility and decreased mental effort compared to traditional approaches. The results of this neuroscience-driven technology inspired by the human body could be a model for the development of novel assistive neurotechnologies.

neuroscience↗

bioRxiv2020

Thin Film Metallization Stacks Serve as Reliable Conductors on Ceramic-based Substrates for Active Implants

Hermetic and non-hermetic packages of active implantable medical devices are often fabricated of ceramics like alumina. Screen printed PtAu paste is the state of the art metallization for functional structures. Due to solid state and liquid diffusion of Au at thermal exposure, solder times are limited; otherwise metal structures tend to delaminate. Moreover, it was shown that PtAu with solder fails after 37.4 years. We established a thin film metallization on alumina process to overcome these disadvantages. The metallization consists of sputtered platinum with an underlying adhesion layer made of tungsten-titanium to increase the adhesion strength to the alumina substrate. We avoided using gold in this work due to its high diffusion tendency. Instead, the materials in use provide relatively low diffusion properties, which potentially increases the long term mechanical performance and usability during assembly and packaging.Utilizing the Design of Experiment (DoE) methodology, we derived an optimal Pt thickness of 500 nm with 43 nm of WTi as adhesion promoting layer. After accelerated aging at 150 °C, corresponding to 125 years at body temperature (37 °C), the contact pad adhesion strength was with 32.75 MPa ± 7.08 MPa still significantly higher than the safety limit of 17 MPa, following the recommendations for a robust screen-printing metallization process. Moreover, soldering times of up to 120 s did not influence the adhesive strength. The new process reduced the minimum track distance to 50% of screen printing values and is capable of rapid prototyping. It helps to make the assembly process independent of the manufacturing person, to increase the yield of device fabrication and -most important in implantable device manufacturing-to make it more robust and thereby more safe for the patient.Competing Interest StatementThe authors have declared no competing interest.View Full Text

bioengineering↗

bioRxiv2019

On the Reliability of Chronically Implanted Thin-Film Electrodes in Human Arm Nerves for Neuroprosthetic Applications

Direct stimulation of peripheral nerves can successfully provide sensory feedback to amputees while using hand prostheses. Recent clinical studies have addressed this important limitation of current prostheses solutions using different implantable electrode concepts. Longevity of the electrodes is key to success. We have improved the long-term stability of the polyimide-based transverse intrafascicular multichannel electrode (TIME) that showed promising performance in clinical trials by integration of silicon carbide adhesion layers. The TIMEs were implanted in the median and ulnar nerves of three trans-radial amputees for up to six months. Here, we present the characterization of the electrical properties of the thin-film metallization as well as material status post explantationem for the first time. The TIMEs showed reliable performance in terms of eliciting sensation and stayed within the electrochemical safe limits maintaining a good working range with respect to amplitude modulation. After termination of the trials and explantation of the probes, no signs of corrosion or morphological change to the thin-film metallization was observed by means of electrochemical and optical analysis. Damage to the metallization was assigned exclusively to mechanical impacts during explantation and handling. The results indicate that thin-film metallization on polymer substrates is applicable in permanent implant system.

bioengineering↗

bioRxiv2019

Stability of Thin-Film Metallization in Flexible Stimulation Electrodes: Analysis and Improvement of in vivo Performance

Micro-fabricated neural interfaces based on polyimide (PI) are achieving increasing importance in translational research. The ability to produce well-defined micro-structures with properties that include chemical inertness, mechanical flexibility and low water uptake are key advantages for these devices. This paper reports the development of the transverse intrafascicular multichannel electrode (TIME) used to deliver intraneural sensory feedback to an upper-limb amputee in combination with a sensorized hand prosthesis. A first-in-human study limited to 30 days was performed. About 90 % of the stimulation contact sites of the TIMEs maintained electrical functionality and stability during the full implant period. However, optical analysis post-explantation revealed that 62.5 % of the stimulation contacts showed signs of mechanical damage at the metallization-PI interface. Such damage likely occurred due to handling during explantation and subsequent analysis, since a significant change in impedance was not observed in vivo. Nevertheless, whereas device integrity is mandatory for long-term functionality in chronic implantation, measures to increase the bonding strength of the metallization-PI interface deserve further investigation. We report here that silicon carbide (SiC) is an effective adhesion-promoting layer resisting heavy electrical stimulation conditions in vivo. Optical analysis of the new electrodes revealed that the metallization remained unaltered after delivering over 14 million pulses in vivo without signs of delamination at the metallization-PI interface. Reliable adhesion of thin-film metallization to substrate has been proven using SiC, improving the potential transfer of micro-fabricated neural electrodes for chronic clinical applications.

bioengineering↗