Biology subjects

Chappell, J.

Publications and source records attributed to Chappell, J..

At least 19 recordsLinked to original sources

bioRxiv2026

Storing >1 byte of information in 16S ribosomal RNA using orthogonal trans-splicing ribozymes

TEXT ABSTRACTCatalytic-RNA (cat-RNA) expressed from mobile DNA can record cellular events, such as the uptake of plasmids via horizontal gene transfer, by splicing a barcode onto 16S ribosomal RNA (rRNA) - a system termed RNA addressable modification (RAM). However, scaling RAM to record multiple simultaneous biological events requires large numbers of orthogonal cat-RNA whose signals reflect the biological features under investigation rather than variability arising from the barcode sequence. Here, we explore how to design orthogonal cat-RNA to record information about multiple plasmid-encoded traits in parallel. We show that cat-RNA having tRNA-derived barcodes with sequence variation in the anticodon stem-loop present greater signal consistency within Escherichia coli than mRNA-derived barcodes. When orthogonal cat-RNA designs harboring tRNA-derived barcodes were evaluated in Vibrio natriegens and Pseudomonas putida, increased variance was observed compared with Escherichia coli. Nevertheless, the signal consistency was sufficient to use these orthogonal cat-RNAs to report on the relative activities of four promoters and two origins of replication by sequencing barcoded-rRNA derived from the three organisms. These results show how RAM can be multiplexed to report on mobile DNA features in microbial communities and illustrate the importance of accounting for variability in RNA outputs when designing and interpreting multiplexed RNA barcoding data. GRAPHICAL ABSTRACT O_FIG O_LINKSMALLFIG WIDTH=200 HEIGHT=88 SRC="FIGDIR/small/738544v1_ufig1.gif" ALT="Figure 1"> View larger version (29K): org.highwire.dtl.DTLVardef@1f6d62aorg.highwire.dtl.DTLVardef@6696c6org.highwire.dtl.DTLVardef@134aeb4org.highwire.dtl.DTLVardef@1b9ceeb_HPS_FORMAT_FIGEXP M_FIG C_FIG

synthetic biology↗

bioRxiv2026

Biocontainment attenuation of mobile DNA host range in a wastewater microbiome

Biocontainment systems designed to attenuate the spread of mobile DNA are challenging to evaluate within microbiomes of engineered environments. To better understand how toxin-based biocontainment systems affect horizontal gene transfer (HGT) in a microbiome, we evaluated the host range of pairs of plasmids using orthogonal catalytic RNA (cat-RNA) that amend distinct barcodes to 16S rRNA following HGT. We show that mobilizable (5 kb) and self-mobilizable (60 kb) plasmids, which use the same RP4 transfer machinery but different origins of replication, overlap in their host range when conjugated in parallel into a wastewater community, with 127 of the 143 amplicon sequence variants (ASVs) presenting barcoding signals from both plasmids (89%). We also find that mobilizable plasmids with or without the Escherichia coli CcdB toxin overlap in host range in a wastewater community. Among the two most abundant orders, CcdB attenuated the barcoding signal in Aeromonadales more consistently than Enterobacteriales, which have F plasmids containing the CcdB-CcdA toxin-antitoxin system used for biocontainment. Also, CcdB decreased the abundance of the mobilizable plasmid by >100-fold and yielded mutations in 85% of the reads. Together, these findings reveal how pairs of plasmids expressing orthogonal cat-RNA can be used to monitor the effects of plasmid-encoded traits on mobile DNA persistence following HGT. They also highlight challenges when using biocontainment systems containing genes related to those found in the microbiomes targeted for engineering.

synthetic biology↗

bioRxiv2026

High-throughput engineering of ligand-activated splicing ribozyme through domain insertion

Domain insertion is an established method to engineer ligand-mediated control of activity in protein scaffolds. Whether this strategy can be systematically applied to large, structured RNAs remains unclear. In this study, we investigated the feasibility of engineering ligand-activated splicing ribozymes (LASRs) from group I catalytic introns. Using domain-insertion profiling coupled with high-throughput screening, we mapped the nucleotide-resolution landscape of aptamer insertion across the ribozyme and identified sites that support robust ligand-dependent control. We showed LASRs function across multiple kingdoms of life, including diverse species of bacteria and even fungi, and can be used to regulate various genetic outputs. Finally, we integrated LASRs with a genetic recorder that writes information into ribosomal RNA, enabling sequencing-based recovery of intracellular chemical signals from microbial consortia. This work establishes LASRs as an RNA-based inducible control platform for sensing diverse chemical inputs, regulating the expression of diverse genes of interest, and recording intracellular information.

synthetic biology↗

bioRxiv2026

A droplet microfluidic-based platform for enhanced DNA delivery in non-model organisms

Expanding genetic engineering beyond model microorganisms is critical to unlocking novel applications in biotechnology, yet the low efficiency of DNA delivery methods like conjugation, remains a major bottleneck in non-model and environmental microbes. Here, we present an automated, high-throughput droplet microfluidic platform that enhances conjugation by encapsulating donor and recipient microbes in picoliter-scale water-in-oil microdroplets, stabilizing cell-cell contact and DNA transfer. Optimization of incubation time, donor to recipient ratio, and plasmid type yielded over a 100-fold increase in conjugation efficiency compared to conventional methods and enabled delivery of complex DNA libraries in low reaction volumes, demonstrating scalability for pooled plasmid library delivery. We further utilized a synthetic biology circuit for donor removal within microdroplets without antibiotic selection, eliminating the need for host-specific selection markers or engineered auxotrophs. When applied to a soil microbial community, this platform improved community-level conjugation, preserving microbial diversity and enabling the identification of genetically accessible chassis. Collectively, this platform establishes a scalable, generalizable solution for high throughput DNA delivery in previously inaccessible microbial hosts. Graphical abstract O_FIG O_LINKSMALLFIG WIDTH=200 HEIGHT=54 SRC="FIGDIR/small/721591v1_ufig1.gif" ALT="Figure 1"> View larger version (18K): org.highwire.dtl.DTLVardef@2ce034org.highwire.dtl.DTLVardef@3399eaorg.highwire.dtl.DTLVardef@1bde851org.highwire.dtl.DTLVardef@df5727_HPS_FORMAT_FIGEXP M_FIG C_FIG

synthetic biology↗

bioRxiv2026

Rational engineering enhances the signal and modularity of an RNA barcoding technology to track gene transfer in microbiomes

Horizontal gene transfer drives microbial evolution and offers a powerful strategy for precision microbiome engineering. To track gene transfer within complex communities, we previously developed RNA-Addressable Modification (RAM), an RNA-barcoding technology where a mobile catalytic RNA barcodes host 16S ribosomal RNA (rRNA) upon gene transfer. However, the first-generation RAM suffered from low barcoding efficiency and lacked modularity, limiting its sensitivity and versatility. Here, we present RAM v2, a re-engineered system with significantly enhanced performance and modularity. By incorporating natural ribozyme structural motifs and improved barcode stability, we achieved a [~]200-fold increase in barcoded rRNA signal. To enhance modularity, we integrated CRISPRi-based repression and ribozyme insulators, facilitating easy promoter swapping. We validated RAM v2 on a mobilisable plasmid delivered to a complex wastewater microbial community, demonstrating a substantial increase in signal over the original system while barcoding similar taxa. These improvements enable higher-resolution, more sensitive monitoring of horizontal gene transfer, providing a robust toolkit for accelerating the study of gene transfer in microbial communities and advancing targeted microbiome engineering.

synthetic biology↗

bioRxiv2025

Establishing an RNA sensor with high sensitivity and dynamic range utilizing a signal amplifier platform

Precise control of gene expression in a cell-state-specific manner is essential for effective therapeutic interventions in complex and dynamic disease microenvironments. Traditional targeting strategies that rely on surface markers or cell type-specific promoters often assume static cellular identities, limiting effectiveness in contexts such as cancer and inflammation, where cell states are highly heterogeneous and dynamic. RNA sensors, such as RADAR (RNA sensing using Adenosine Deaminases Acting on RNA), provide a modular, programmable, and non-integrating platform for classifying cell states. However, it is also characterized by low sensitivity and dynamic range, which limits its applications in detecting low-abundance transcripts. In this work, we integrate RADAR sensors with a signal amplification circuit to enhance sensitivity and dynamic range. We demonstrate that this combined RADAR-amplifier platform enables real-time monitoring of subtle changes in the abundance of endogenous transcripts under physiological conditions. Our results demonstrate the utility of this platform for fundamental biological studies and the development of precision therapeutic strategies. O_FIG O_LINKSMALLFIG WIDTH=200 HEIGHT=92 SRC="FIGDIR/small/675666v1_ufig1.gif" ALT="Figure 1"> View larger version (17K): org.highwire.dtl.DTLVardef@10a05baorg.highwire.dtl.DTLVardef@fe118aorg.highwire.dtl.DTLVardef@318dfforg.highwire.dtl.DTLVardef@16172e9_HPS_FORMAT_FIGEXP M_FIG C_FIG

synthetic biology↗

bioRxiv2025

Cross-order detection of bacteriophage transduction in communities using ribosomal RNA barcoding

Bacteriophages (phages) facilitate gene transfer and microbial evolution in all ecosystems and have applications as tools for engineering microbiomes and as antimicrobials. Historic efforts to map phage hosts, such as plaque assays, are limited to culturable bacteria, are low throughput, and are hard to apply in environmentally-relevant contexts. To overcome these limitations, a synthetic ribozyme that stores information about DNA uptake in 16S ribosomal RNA (rRNA) was used to identify phage-host interactions by integrating the ribozyme into phage-plasmid P1 and performing targeted 16S rRNA sequencing following transduction. Experiments in synthetic and wastewater communities revealed Aeromonadales as a novel P1 host order and transduction of P1 into pathogens. Host range varied across phagemids with different origins of replication and phage particles with different tail fibers. This work shows how autonomous barcoding can be used in phages to identify the molecular controls on their host range in communities.

synthetic biology↗

bioRxiv2025

Controlling the taxonomic composition of biological information storage in 16S ribosomal RNA

Microbes can be programmed to record participation in gene transfer by coding biological-recording devices into mobile DNA. Upon DNA uptake, these devices transcribe a catalytic RNA (cat-RNA) that binds to conserved sequences within ribosomal RNA (rRNA) and perform a trans-splicing reaction that adds a barcode to the rRNA. Existing cat-RNA designs were manually generated to be broad-host range, providing no control over the organisms that were barcoded. To achieve control over the organisms barcoded by cat-RNA, we created a program called Ribodesigner that uses input sets of rRNA sequences to create designs with varying specificities. We show how this algorithm can be used to identify designs that enable kingdom-wide barcoding, or selective barcoding of specific taxonomic groups within a kingdom. We use Ribodesigner to create cat-RNA designs that target Pseudomonadales while avoiding Enterobacterales, and we compare the performance of one design to a cat-RNA that was previously found to be broad host range. When conjugated into a mixture of Escherichia coli and Pseudomonas putida, the new design presents increased selectivity compared to a broad host range cat-RNA. Ribodesigner is expected to aid in developing cat-RNA that store information within user-defined sets of microbes in environmental communities for gene transfer studies. GRAPHICAL ABSTRACT O_FIG O_LINKSMALLFIG WIDTH=200 HEIGHT=109 SRC="FIGDIR/small/651329v2_ufig1.gif" ALT="Figure 1"> View larger version (37K): org.highwire.dtl.DTLVardef@bcc65borg.highwire.dtl.DTLVardef@18288f2org.highwire.dtl.DTLVardef@ecf5c7org.highwire.dtl.DTLVardef@fbe064_HPS_FORMAT_FIGEXP M_FIG C_FIG

synthetic biology↗

bioRxiv2025

Title: Engineering Plasmids with Synthetic Origins of Replication

Plasmids remain by far the most common medium for delivering engineered DNA to microorganisms. However, the reliance on natural plasmid replication mechanisms limits their tunability, compatibility, and modularity. Here we refactor the natural pMB1 origin and create plasmids with customizable copy numbers by tuning refactored components. We then create compatible origins that use synthetic RNA regulators to implement independent copy control. We further demonstrate that the synthetic origin of replication (SynORI) can be engineered modularly to respond to various signals, allowing for multiplexed copy-based reporting of environmental signals. Lastly, a library of 6 orthogonal SynORI plasmids is created and co-maintained in E. coli for a week. This work establishes the feasibility of creating plasmids with SynORI that can serve as a new biotechnology for synthetic biology.

synthetic biology↗

bioRxiv2024

Ribozyme-mediated gene-fragment complementation for non-destructive reporting of DNA transfer within soil

Enzymes that produce volatile metabolites can be coded into genetic circuits to report non-disruptively on microbial behaviors in hard-to-image soils. However, these enzyme reporters remain challenging to apply in gene transfer studies due to leaky off states that can lead to false positives. To overcome this problem, we designed a reporter that uses ribozyme-mediated gene-fragment complementation of a methyl halide transferase (MHT) to regulate the synthesis of methyl halides. We split the mht gene into two non-functional fragments and attached these to a pair of splicing ribozyme fragments. While the individual mht-ribozyme fragments did not produce methyl halides when transcribed alone in Escherichia coli, co-expression resulted in a spliced transcript that translated the MHT reporter. When cells containing one mht-ribozyme fragment transcribed from a mobile plasmid were mixed with cells that transcribed the second mht-ribozyme fragment, methyl halides were only detected following rare conjugation events. When conjugation was performed in soil, it led to a 16-fold increase in methyl halides in the soil headspace. These findings show how ribozyme-mediated gene-fragment complementation can achieve tight control of protein reporter production, a level of control that will be critical for monitoring the effects of soil conditions on gene transfer and the fidelity of biocontainment measures developed for environmental applications.

synthetic biology↗

bioRxiv2023

Targeted Transcriptional Activation using a CRISPR-Associated Transposon System

Synthetic perturbation of gene expression is central to our ability to reliably uncover genotype-phenotype relationships in microbes. Here, we present a novel gene transcription activation strategy that uses the Vibrio cholerae CRISPR-Associated Transposon (CAST) system to selectively insert promoter elements upstream of genes of interest. Through this strategy, we show robust activation of both recombinant and endogenous genes across the E. coli chromosome. We then demonstrate precise tuning of expression levels by exchanging the promoter elements being inserted. Finally, we demonstrate that CAST activation can be used to synthetically induce ampicillin-resistant phenotypes in E. coli.

synthetic biology↗

bioRxiv2023

Information storage across a microbial community using universal RNA memory

Biological recorders can code information in DNA, but they remain challenging to apply in complex microbial communities. To program microbiome information storage, a synthetic catalytic RNA (cat-RNA) was used to write information in ribosomal RNA (rRNA) about gene transfer host range. By reading out native and modified rRNA using amplicon sequencing, we find that 140 out of 279 wastewater microbial community members from twenty taxonomic orders participate in conjugation and observe differences in information storage across amplicon sequence variants. Twenty of the variants were only observed in modified rRNA amplicons, illustrating information storage sensitivity. This autonomous and reversible RNA-addressable memory (RAM) will enable biosurveillance and microbiome engineering across diverse ecological settings and studies of environmental controls on gene transfer and cellular uptake of extracellular materials. One-Sentence SummaryRibosomal RNA sequencing detects cellular events recorded across a wastewater microbial community using synthetic biology.

synthetic biology↗

bioRxiv2023

A multi-omics genome-and-transcriptome single-cell atlas of human preimplantation embryogenesis reveals the cellular and molecular impact of chromosome instability

The frequent acquisition of genomic abnormalities in human preimplantation embryos is a leading cause of pregnancy loss, but does not necessarily prohibit healthy offspring. However, the impact of genomic abnormalities on cellular states and development of the early human embryo remains largely unclear. Here, we characterise aneuploidy and reconstruct gene regulatory networks in human preimplantation embryos, and investigate gene expression and developmental perturbations instigated by aneuploidy using single-cell genome-and-transcriptome sequencing (G&T-seq). At the genomic level, we show that acquired numerical and structural chromosomal aberrations are frequent across all stages of early embryogenesis and in all cell lineages. At the transcriptome level, we identify regulators of cell identity and uncover a network of 248 transcription factors from 10 major gene regulatory modules that characterise the distinct lineages of human preimplantation embryos. By integrating single-cell DNA-with RNA-information, we unveil how expression levels are affected by losses or gains of the corresponding genes in embryonic cells across human preimplantation development, as well as how copy-number aberrant transcription factor genes perturb the expression of their cognate target genes in euploid regions. Furthermore, we reveal a majority of aneuploid cells show a developmental delay and reduced fitness, indicating cell competition within the mosaic diploid-aneuploid embryo, which may contribute to selection against aneuploid cells and the birth of healthy offspring from mosaic diploid-aneuploid embryos. In summary, our multi-modal analyses provide unprecedented insights into early human embryo development.

developmental biology↗

bioRxiv2023

A portable regulatory RNA array design enables tunable and complex regulation across diverse bacteria

A lack of composable and tunable gene regulators has hindered efforts to engineer non-model bacteria and consortia. To address this, we explore the broad-host potential of small transcription activating RNA (STAR) and propose a novel design strategy to achieve tunable gene control. First, we demonstrate that STARs optimized for E. coli function across different Gram-negative species and can actuate using phage RNA polymerase, suggesting that RNA systems acting at the level of transcription are portable. Second, we explore a novel RNA design strategy that uses arrays of tandem and transcriptionally fused RNA regulators to precisely alter regulator concentration from 1 to 8 copies. This provides a simple means to predictably tune output gain across species and does not require access to large regulatory part libraries. Finally, we show RNA arrays can be used to achieve tunable cascading and multiplexing circuits across species, analogous to the motifs used in artificial neural networks.

synthetic biology↗

bioRxiv2022

A split ribozyme that links detection of a native RNA to orthogonal protein outputs

Individual RNA remains a challenging signal to synthetically transduce into different types of cellular information. Here, we describe Ribozyme-ENabled Detection of RNA (RENDR), a plug-and-play strategy that uses cellular transcripts to template the assembly of split ribozymes, triggering splicing reactions that generate orthogonal protein outputs. To identify split ribozymes that require templating for splicing, we used laboratory evolution to evaluate the activities of different split variants of the Tetrahymena thermophila ribozyme. The best design delivered a 93-fold dynamic range of splicing with RENDR controlling fluorescent protein production in response to an RNA input. We resolved a thermodynamic model to guide RENDR design, showed how input signals can be transduced into diverse visual, chemical, and regulatory outputs, and used RENDR to detect an antibiotic resistance phenotype in bacteria. This work shows how transcriptional signals can be monitored in situ using RNA synthetic biology and converted into different types of biochemical information.

synthetic biology↗

bioRxiv2021

Activating natural product synthesis using CRISPR interference and activation systems in Streptomyces

The rise of antibiotic-resistant bacteria represents a major threat to global health, creating an urgent need to discover new antibiotics. Natural products derived from the genus Streptomyces represent a rich and diverse repertoire of chemical molecules from which new antibiotics are likely to be found. However, a major challenge is that the biosynthetic gene clusters (BGCs) responsible for natural product synthesis are often poorly expressed under laboratory culturing conditions, thus preventing isolation and screening of novel chemicals. To address this, we describe a novel approach to activate silent BGCs through rewiring endogenous regulation using synthetic gene regulators based upon CRISPR-Cas. First, we create CRISPR interference (CRISPRi) and CRISPR activation (CRISPRa) systems that allow for highly programmable and effective gene repression and activation in Streptomyces. We then harness these tools to activate a silent BGC through perturbing its endogenous regulatory network. Together, this work advances the synthetic regulatory toolbox for Streptomyces and facilitates the programmable activation of silent BGCs for novel chemical discovery.

synthetic biology↗

bioRxiv2021

RNA compensation: A positive feedback insulation strategy for RNA-based networks

The lack of signalling modularity of biomolecular systems poses major challenges toward engineering complex networks. An important problem is posed by the consumption of signaling molecules upon circuit interconnection, which makes it possible to control a downstream circuit but compromises the performance of the upstream circuit. This issue has been previously addressed with insulation strategies including high-gain negative feedback and phosphorylation-dephosphorylation reaction cycle. In this paper, we focus on RNA-based circuits and propose a new positive-feedback insulation strategy to mitigate signal consumption. An RNA input is added in tandem with transcription output to compensate the RNA consumption, leading to concentration robustness of the input RNA molecule regardless of the amount of downstream modules. We term this strategy RNA compensation, and it can be applied to systems that have a stringent input-output gain, such as Small Transcription Activating RNAs (STARs). Our analysis shows that RNA compensation not only eliminates the signaling consumption in individual STAR-based regulators, but also improves the composability of STAR cascades and the modularity of RNA bistable systems.

synthetic biology↗

bioRxiv2021

Uncovering the distinct properties of a bacterial type I-E CRISPR activation system

Synthetic gene regulators based upon CRISPR-Cas systems offer highly programmable technologies to control gene expression in bacteria. Bacterial CRISPR activators (CRISPRa) have been developed that use engineered type II CRISPR-dCas9 to localize transcription activation domains near promoter elements to activate transcription. However, several reports have demonstrated distance-dependent requirements and periodical activation patterns that overall limit the flexibility of these systems. Here, we demonstrate the potential of using an alternative type I-E CRISPR-Cas system to create a CRISPRa with distinct and expanded regulatory properties. We create the first bacterial CRISPRa system based upon a type I-E CRISPR-Cas, and demonstrate differences in the activation range of this system compared to type II CRISPRa systems. Furthermore, we characterize the distance-dependent activation patterns of type I-E CRISPRa to reveal a distinct and more frequent periodicity of activation.

synthetic biology↗