Biology subjects

Caliari, S. R.

Publications and source records attributed to Caliari, S. R..

At least 19 recordsLinked to original sources

bioRxiv2026

Aligned basement membrane-modified collagen scaffolds for skeletal muscle tissue engineering

Biomaterial scaffolds for repairing traumatic muscle injuries require restoration of both the anisotropic architecture and basement membrane extracellular matrix cues critical to normal muscle function. To address this need, we establish a collagen-glycosaminoglycan (CG) scaffold platform pairing an aligned pore microstructure, produced via directional freeze-drying, with basement membrane protein functionalization via carbodiimide crosslinking. Laminin and/or collagen IV are successfully tethered and retained within CG scaffolds over 7 days without significantly altering pore size or alignment, confirming stable protein functionalization and preservation of scaffold architecture. Human muscle progenitor cells show excellent viability and metabolic activity in all scaffold groups, with collagen IV functionalization significantly enhancing myotube number and fusion index. Toward establishing scaffold compatibility with non-myogenic support cells, we show that neural stem cells remain viable and metabolically active across all scaffold conditions. Overall, these findings highlight the combination of aligned scaffold architecture and collagen IV functionalization as potentially impactful for skeletal muscle tissue engineering.

bioengineering↗

bioRxiv2026

Aligned multicompartment collagen scaffolds support stratified myoblast and fibroblast behavior for musculotendinous tissue engineering

Injuries to musculoskeletal tissue junctions are exceedingly common and notoriously difficult to repair due to the inability to restore overlapping gradations of structural, biochemical, and mechanical signals critical to tissue interfacial integrity. This work introduces a multicompartment scaffold for muscle-tendon junction (MTJ) tissue engineering, containing distinct muscle and tendon compartments joined at a continuous interface, recapitulating the structural anisotropy, graded collagen content, and electrical excitability of the native MTJ. Collagen suspensions with or without electrically conductive poly(3,4-ethylenedioxythiophene) (PEDOT) particles representing muscle and tendon compartments respectively were carefully layered and directionally freeze-dried to form an integrated multicompartment scaffold with aligned pores mimicking the MTJ. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) confirmed the formation of a structurally anisotropic scaffold with stratified conductive polymer content, and importantly, a smooth continuous interfacial region joining the two compartments of similar scale to native MTJ. In contrast to multicompartment materials with abrupt interfaces, mechanical testing confirmed no decrease in multicompartment scaffold tensile properties relative to single compartment controls. Myoblasts and fibroblasts were successfully seeded on multicompartment scaffolds in a stratified manner while uniformly conforming to aligned scaffold contact guidance cues and maintaining metabolic activity over a week in culture. Myoblasts underwent compartment-specific differentiation while fibroblasts remained viable, even under myogenic differentiation conditions. Together, this work presents a scaffold platform integrating key structural, biochemical, and mechanical features necessary for MTJ tissue engineering.

bioengineering↗

bioRxiv2026

Emergent directional persistence in fibrous granular scaffolds guides myotube organization

Granular scaffolds have emerged as promising platforms for tissue regeneration, offering injectability and cell-scale porosity that support robust cell infiltration and tissue formation. However, the isotropic pore structure of spherical building blocks does not provide the directional cues needed to guide organized tissue formation. Addressing this requires asking not just whether granular scaffolds can be made anisotropic, but whether directional cues persist across the pore network at scales relevant to cell behavior. Using high aspect ratio GelMA hydrogel fibers as building blocks, we demonstrate that spherical granular materials lose orientational coherence at the cellular scale, confirming that isotropic building blocks are fundamentally incapable of providing structural guidance beyond individual pore neighborhoods. In contrast, fibrous building blocks extend persistence into the multicellular range, occupying an intermediate architectural regime exhibiting locally coherent but globally variable organization, rather than simple isotropic or uniaxial alignment, that has previously been inaccessible to granular scaffold design. We show this regime is functionally meaningful: myotubes undergo contact guidance through locally persistent but globally variable pore structure, and greater persistence is associated with increased myotube elongation and multinucleation in primary human muscle progenitor cells. Together these results expand the design space for granular scaffolds beyond pore size and porosity, and establish persistence as a variable linking granular scaffold architecture to organized tissue formation.

bioengineering↗

bioRxiv2026

An agent-based model suggests how senescent cell behavior and matrix mechanics drive pulmonary fibrosis in aged mice

Idiopathic pulmonary fibrosis (IPF) is a progressive and ultimately fatal disease of aging, driven by dysregulated fibroblast activation and accompanied by collagen accumulation in the lung interstitium, resulting in tissue stiffening. While the accumulation of senescent cells has been increasingly implicated in IPF pathogenesis, understanding the reciprocal dynamics of senescent fibroblast levels and evolving tissue mechanics is difficult to achieve with experimental approaches alone. To address this limitation, we developed an agent-based model (ABM) of fibroblast activation in the lung that couples cell behavior to the dynamic mechanical changes accompanying fibrosis. This model was parameterized entirely from experimental data in young mice to enable robust validation and then adapted to fit aged mouse biology for additional validation. Both young and aged models accurately reflected changes in collagen accumulation and stiffness burden of experimental systems. We then incorporated senescent cell behavior into the aged model to investigate how senescent cell burden influences fibrosis progression and how cell-cell interactions drive senescent cell accumulation. These simulations identified a unique role for juxtacrine-mediated contact between non-senescent and senescent fibroblasts in expanding the total senescent cell burden. Our ABM also revealed that the timing of immune-mediated senescent cell clearance critically regulates fibrotic outcomes. Together, this ABM provides useful insights into how the interrelated dynamics of tissue mechanics and senescent fibroblasts drive fibrosis progression.

bioengineering↗

bioRxiv2025

Heparin-modified aligned collagen scaffolds enhance in vitro myogenesis

Biomaterial-based skeletal muscle tissue engineering approaches have largely focused on mimicking the 3D aligned architecture of native muscle, which is critical for guiding myotube formation and force transmission. In contrast, fewer studies incorporate glycosaminoglycan (GAG)-mediated biochemical cues despite their known role in regulating myogenesis and growth factor sequestration. In this study, we develop aligned collagen-GAG (CG) scaffolds using directional freeze-drying and systematically vary GAG content by incorporating GAGs of increasing sulfation levels (hyaluronic acid, chondroitin sulfate, and heparin). While all scaffold variants support myoblast adhesion, metabolic activity, and myotube alignment, heparin-modified collagen scaffolds significantly enhance myoblast metabolic activity and myogenic differentiation as measured by myosin heavy chain (MHC) expression and myotube size. We additionally show that heparin-modified scaffolds sequester and retain significantly higher levels of insulin-like growth factor-1 (IGF-1), a potent promoter of myogenesis, compared to other scaffold groups. Together, these results highlight the importance of optimizing GAG content in CG scaffolds for targeted applications and underscore the promise of heparin-modified CG scaffolds as a material platform for skeletal muscle tissue engineering.

bioengineering↗

bioRxiv2025

Cadherin-11 integrates Piezo1 and interleukin-6 signaling to promote fibroblast activation

Persistent fibroblast activation drives tissue fibrosis, yet how mechanical and inflammatory cues are integrated to promote this aberrant behavior remains unclear. Using a hyaluronic acid (HA)-based hydrogel platform to model normal and fibrotic lung mechanics, we examine the roles of Piezo1 and cadherin-11 (CDH11), both implicated in M2 macrophage-fibroblast crosstalk during pulmonary fibrosis progression, in interleukin (IL)-6-mediated fibroblast activation. While both Piezo1 and CDH11 expression increase in activated fibroblasts, blocking IL-6 signaling decreases CDH11, but not Piezo1, expression. Instead, Piezo1 activity promotes nuclear accumulation of the calcium-dependent transcription factor NFAT1. While Piezo1 inhibition moderately reduces CDH11 expression, it does not prevent fibroblast activation as measured by spreading and type I collagen expression, whereas CDH11 knockout suppresses fibroblast activation metrics, reduces Piezo1 expression, and decreases IL-6 secretion in both fibroblast only and fibroblast-M2 macrophage co-cultures. Furthermore, CDH11 levels increase in parallel with progressive fibroblast activation, highlighting its role in promoting this pro-fibrotic phenotype. Together, these findings underscore a previously unrecognized signaling axis in which CDH11 serves as a key mediator of sustained fibroblast activation, coordinating mechanical and inflammatory cues, and highlight CDH11 as a potential therapeutic target in pulmonary fibrosis.

bioengineering↗

bioRxiv2025

Lung tissue viscoelasticity is preserved with bleomycin-induced fibrosis in mice

In pulmonary fibrosis, excessive scar tissue accumulates in the alveolar interstitial space, impairing gas exchange and compromising lung function. This fibrotic remodeling results in tissue stiffening, but more complex lung mechanical properties critical to tissue function, such as viscoelasticity and stress relaxation, remain poorly defined. To address this gap, we use the bleomycin aged mouse model to characterize both bulk and spatially-resolved viscoelastic mechanical properties of normal and fibrotic lungs. Our analysis reveals that while bleomycin-induced fibrosis leads to heterogeneously increased lung stiffness, viscoelasticity as measured by tan delta (ratio of loss to storage modulus) and stress relaxation timescales remains remarkably consistent as a function of both age and bleomycin treatment. This unexpected preservation of viscoelasticity despite fibrotic stiffening highlights a previously underappreciated mechanical phenotype of fibrotic lungs. To model these distinct mechanical features in vitro, we utilize a hyaluronic acid-based hydrogel system that largely recapitulates the viscoelastic mechanical properties observed in both normal and fibrotic lungs. These findings provide new insight into the mechanical consequences of fibrosis and establish a tunable in vitro hydrogel platform mimicking key tissue viscoelastic properties.

bioengineering↗

bioRxiv2025

Substrate stiffness and viscoelasticity influence fibroblast senescence

Senescent cell accumulation has been implicated in aging and fibrotic disease, which are both characterized by increased tissue stiffness. However, the direct connection between tissue mechanics and senescence induction remains disputed in the literature. Thus, this work investigates the influence of hydrogel stiffness and viscoelasticity in promoting fibroblast senescence both in combination with genotoxic stress and independently. We show that while lung fibroblast YAP signaling declines with senescence induction, senescent fibroblasts maintain their mechanosensing capabilities with increased YAP nuclear localization on higher stiffness hydrogels. Most notably, we find a unique role for hydrogel viscoelasticity in senescence induction with soft (2 kPa) viscoelastic substrates promoting both the onset and amplification of senescence, even in the absence of genotoxic stress. These changes are not associated with a decline in YAP activity, but instead with a decline in nuclear DAPI intensity, suggesting a role of nuclear organization in driving this phenotype. Overall, this work highlights the influence of mechanics on the induction of senescence and supports the key role of viscoelasticity.

bioengineering↗

bioRxiv2025

Norbornene homopolymerization limits cell spreading in thiol-ene photoclick hydrogels

Thiol-ene click chemistry is a powerful tool for designing hydrogels mimicking the mechanical and biochemical properties of 3D cellular microenvironments. The high selectivity of thiol-norbornene step-growth polymerization enables precise control of crosslinking mechanism, circumventing the alkene homopolymerization present in other systems that can prevent encapsulated cell spreading. Limited stress relaxation of a dynamically-crosslinked norbornene-modified hyaluronic acid (NorHA) hydrogel employing a thiol-norbornene photoclick reaction led us to investigate the prevalence of norbornene homopolymerization in this supposed click reaction. Norbornene conversion was quantified in multiple thiol plus norbornene-modified polymer system permutations, revealing higher norbornene conversion than expected for 1:1 thiol-ene addition. We showed that decreasing the number of norbornenes per NorHA chain (f) mitigated network formation via norbornene homopolymerization. Dynamic hydrogels fabricated with NorHA of f = 8 (Nor8HA) exhibited 93.0 {+/-} 1.6% relaxation, while those fabricated with NorHA of f = 40 (Nor40HA) achieved only 42.3 {+/-} 0.1% relaxation. As early as day 3 of culture, Nor8HA hydrogels facilitated spreading of encapsulated human mesenchymal stromal cells (hMSCs) into a spindle-like morphology (aspect ratio: 2.95 {+/-} 0.38), while Nor40HA hydrogels appeared to constrain cells into a spherical or compact star morphology (aspect ratio: 1.22 {+/-} 0.01). Inference of a single-cell morphological space derived from a shape-matching distance metric validated the two distinct hMSC morphological phenotypes primarily associated with polymer f. Despite its widespread use as a click reaction, radical-mediated thiol-norbornene crosslinking was found to not be stoichiometric in dilute aqueous conditions used to fabricate hydrogels. Altering network topology through polymer f enabled the rescue of hydrogel dynamic behavior and encapsulated hMSC spreading, despite the presence of norbornene homopolymerization, highlighting the need to consider network-level properties when designing engineered cellular microenvironments.

bioengineering↗

bioRxiv2025

Focused Ultrasound Crosslinkable Granular Hydrogels

Minimally invasive delivery of biomaterials for tissue regeneration can be achieved using biomaterials delivered by injection that rapidly stabilize at the delivery site. Tissue regeneration has been shown to be dependent on material properties, with porosity strongly supporting revascularization and tissue regrowth. Here, a highly porous granular hydrogel system was designed that is compatible with the unique strengths of highly penetrating, minimal invasive focused ultrasound (FUS), to address this challenge. FUS offers well-defined spatial and temporal control over hydrogel crosslinking. We developed a composite granular hydrogel scaffold composed of two polyethylene glycol (PEG)-based components, microgels and fibers with FUS-responsive chemistry, and a pore-defining gelatin microgel component. Upon applying FUS, the bulk granular hydrogel stabilized through the formation of crosslinks between PEG components, with porosity designed by gelatin microgel melting. FUS-crosslinking parameters were determined that resulted in crosslinking both in vitro and a mouse cadaver model of minimally invasive delivery. The resulting granular hydrogels stability depended on the presence of fibers and exhibited viscoelastic properties comparable to granular hydrogels that were photocrosslinked. Hydrogels were highly porous and cytocompatible. This work defines a FUS-responsive granular system and extends the potential of FUS as a novel, noninvasive method for crosslinking regenerative hydrogel systems.

bioengineering↗

bioRxiv2024

Direct M2 macrophage co-culture overrides viscoelastic hydrogel mechanics to promote fibroblast activation

Fibroblast activation drives fibrotic diseases such as pulmonary fibrosis. However, the complex interplay of how tissue mechanics and macrophage signals combine to influence fibroblast activation is not well understood. Here, we use hyaluronic acid hydrogels as a tunable cell culture system to mimic lung tissue stiffness and viscoelasticity. We applied this platform to investigate the influence of macrophage signaling on fibroblast activation. Fibroblasts cultured on stiff (50 kPa) hydrogels mimicking fibrotic tissue exhibit increased activation as measured by spreading as well as type I collagen and cadherin-11 expression compared to fibroblasts cultured on soft (1 kPa) viscoelastic hydrogels mimicking normal tissue. These trends were unchanged in fibroblasts cultured with macrophage-conditioned media. However, fibroblasts directly co-cultured with M2 macrophages show increased activation, even on soft viscoelastic hydrogels that normally suppress activation. Inhibition of interleukin 6 (IL6) signaling does not change activation in fibroblast-only cultures but ameliorates the pro-fibrotic effects of M2 macrophage co-culture. These results underscore the ability of direct M2 macrophage co-culture to override hydrogel viscoelasticity to promote fibroblast activation in an IL6-dependent manner. This work also highlights the utility of using hydrogels to deconstruct complex tissue microenvironments to better understand the interplay between microenvironmental mechanical and cellular cues.

bioengineering↗

bioRxiv2024

Freeze-dried porous collagen scaffolds for the repair of volumetric muscle loss injuries

Volumetric muscle loss (VML) injuries are characterized by the traumatic loss of skeletal muscle resulting in permanent damage to both tissue architecture and electrical excitability. To address this challenge, we previously developed a 3D aligned collagen-glycosaminoglycan (CG) scaffold platform that supported in vitro myotube alignment and maturation. In this work, we assessed the ability of CG scaffolds to facilitate functional muscle recovery in a rat tibialis anterior (TA) model of VML. Functional muscle recovery was assessed following implantation of either non-conductive CG or electrically conductive CG-polypyrrole (PPy) scaffolds at 4, 8, and 12 weeks post-injury by in vivo electrical stimulation of the peroneal nerve. After 12 weeks, scaffold-treated muscles produced maximum isometric torque that was significantly greater than non-treated tissues. Histological analysis further supported these reparative outcomes with evidence of regenerating muscle fibers at the material-tissue interface in scaffold-treated tissues that was not observed in non-repaired muscles. Scaffold-treated muscles possessed higher numbers of M1 and M2 macrophages at the injury while conductive CG-PPy scaffold-treated muscles showed significantly higher levels of neovascularization as indicated by the presence of pericytes and endothelial cells, suggesting a persistent wound repair response not observed in non-treated tissues. Finally, only tissues treated with non-conductive CG scaffolds displayed neurofilament staining similar to native muscle, further corroborating isometric contraction data. Together, these findings show that CG scaffolds can facilitate improved skeletal muscle function and endogenous cellular repair, highlighting their potential use as therapeutics for VML injuries.

bioengineering↗

bioRxiv2023

Modular multiwell viscoelastic hydrogel platform for two- and three-dimensional cell culture applications

Hydrogels have gained significant popularity as model platforms to study the reciprocal interactions between cells and their microenvironment. While hydrogel tools to probe many characteristics of the extracellular space have been developed, fabrication approaches remain challenging and time-consuming, limiting multiplexing or widespread adoption. Thus, we have developed a modular fabrication approach to generate distinct hydrogel microenvironments within 96-well plates for increased throughput of fabrication as well as integration with existing high-throughput assay technologies. This approach enables in situ hydrogel mechanical characterization and was used to generate both elastic and viscoelastic hydrogels across a range of stiffnesses. Additionally, this fabrication method enabled a 3-fold reduction in polymer and up to an 8-fold reduction in fabrication time required per hydrogel replicate. The feasibility of this platform for cell culture applications was demonstrated by measuring both population-level and single cell-level metrics via microplate reader and high-content imaging. Finally, the 96-well hydrogel array was utilized for 3D cell culture, demonstrating the ability to support high cell viability. Together, this work demonstrates a versatile and easily adoptable fabrication approach that can support the ever-expanding tool kit of hydrogel technologies for cell culture applications.

bioengineering↗

bioRxiv2023

Packed hydrogel microfibers as a granular medium

Particle-based (granular) hydrogels are an attractive class of biomaterials due to their unique properties and array of applications in the biomedical space - serving as platforms for extrusion printing and injecting as well as permissive materials for 3D cell culture. Physical properties of particle-based hydrogels are governed in part by contact forces between particles, which are limited to interactions with neighboring particles. Secondary annealing mechanisms are often used to increase mechanical properties and serve to link particles across the granular material volume. Here, we present a novel particle-based hydrogel where each "particle" is a discrete electrospun hydrogel microfiber that has been segmented to a length of 93 {+/-} 51 m, with a diameter of 1.6 {+/-} 0.3 m. The fibers are flexible and have aspect ratios that are greater than one order of magnitude larger than most traditional hydrogel microparticles. This enables long-range entanglements of discrete fibers following packing into a bulk material, yielding unique properties. Without crosslinking, these packed hydrogel microfiber materials are mechanically robust, they can stretch without breaking when strained, and they exhibit stress relaxation under constant strain. As a cell culture scaffold, shear-induced alignment of the individual fibers within 3D printed filaments confers contact guidance cues to cells and promotes anisotropic cellular morphologies. Packed hydrogel microfibers can also be used as 3D cell culture environments, with cells able to spread due to the permissive nature of the scaffold. Overall, this work introduces a particle-based material system comprised of individual hydrogel microfibers that allows unique properties to be engineered into biomaterials that might be used in extrusion processes and cell cultures and, ultimately, in tissue engineering and regenerative medicine applications.

bioengineering↗

bioRxiv2023

Serial passaging affects stromal cell mechanosensitivity on hyaluronic acid hydrogels

There is tremendous interest in developing hydrogels as tunable in vitro cell culture platforms to study cell response to mechanical cues in a controlled manner. However, little is known about how common cell culture techniques, such as serial expansion on tissue culture plastic, affect subsequent cell behavior when cultured on hydrogels. In this work we leverage a methacrylated hyaluronic acid hydrogel platform to study stromal cell mechanotransduction. Hydrogels are first formed through thiol-Michael addition to model normal soft tissue (e.g., lung) stiffness (E ~ 1 kPa). Secondary crosslinking via radical photopolymerization of unconsumed methacrylates allows matching of early- (E ~ 6 kPa) and late-stage fibrotic tissue (E ~ 50 kPa). Early passage (P1) primary human mesenchymal stromal cells (hMSCs) display increased spreading, myocardin-related transcription factor-A (MRTF-A) nuclear localization, and focal adhesion size with increasing hydrogel stiffness. However, late passage (P5) hMSCs show reduced sensitivity to substrate mechanics with lower MRTF-A nuclear translocation and smaller focal adhesions on stiffer hydrogels compared to early passage hMSCs. Similar trends are observed in an immortalized human lung fibroblast line. Overall, this work highlights the implications of standard cell culture practices on investigating cell response to mechanical signals using in vitro hydrogel models.

bioengineering↗

bioRxiv2023

Supramolecular fibrous hydrogel augmentation of uterosacral ligament suspension for treatment of pelvic organ prolapse

Uterosacral ligament suspension (USLS) is a common surgical treatment for pelvic organ prolapse (POP). However, the relatively high failure rate of up to 40% underscores a strong clinical need for complementary treatment strategies, such as biomaterial augmentation. Herein, we describe the first hydrogel biomaterial augmentation of USLS in a recently established rat model using an injectable fibrous hydrogel composite. Supramolecularly-assembled hyaluronic acid (HA) hydrogel nanofibers encapsulated in a matrix metalloproteinase (MMP)-degradable HA hydrogel create an injectable scaffold showing excellent biocompatibility and hemocompatibility. The hydrogel can be successfully delivered and localized to the suture sites of the USLS procedure, where it gradually degrades over 6 weeks. In situ mechanical testing 24 weeks post-operative in the multiparous USLS rat model shows the ultimate load (load at failure) to be 1.70 {+/-} 0.36 N for the intact uterosacral ligament (USL), 0.89 {+/-} 0.28 N for the USLS repair, and 1.37 {+/-} 0.31 N for the USLS + hydrogel (USLS+H) repair (n = 8). These results indicate that the hydrogel composite significantly improves load required for tissue failure compared to the standard USLS, even after the hydrogel degrades, and that this hydrogel-based approach could potentially reduce the high failure rate associated with USLS procedures.

bioengineering↗

bioRxiv2022

Hydrogel mechanics regulate fibroblast DNA methylation and chromatin condensation

Cellular mechanotransduction plays a central role in fibroblast activation during fibrotic disease progression, leading to increased tissue stiffness and reduced organ function. While the role of epigenetics in disease mechanotransduction has begun to be appreciated, there is little known about how substrate mechanics, particularly the timing of mechanical inputs, regulate epigenetic changes such as DNA methylation and chromatin reorganization during fibroblast activation. In this work, we engineered a hyaluronic acid hydrogel platform with independently tunable stiffness and viscoelasticity to model normal (storage modulus, G [~] 0.5 kPa, loss modulus, G [~] 0.05 kPa) to increasingly fibrotic (G [~] 3.5 and 8 kPa, G [~] 0.05 kPa) lung mechanics. Human lung fibroblasts exhibited increased spreading and nuclear localization of myocardin-related transcription factor A (MRTF-A) with increasing substrate stiffness within 1 day, with these trends holding steady for longer cultures. However, fibroblasts displayed time-dependent changes in global DNA methylation and chromatin organization. Fibroblasts initially displayed increased DNA methylation and chromatin decondensation on stiffer hydrogels, but both of these measures decreased with longer culture times. To investigate how culture time affected the responsiveness of fibroblast nuclear remodeling to mechanical signals, we engineered hydrogels amenable to in situ secondary crosslinking, enabling a transition from a compliant substrate mimicking normal tissue to a stiffer substrate resembling fibrotic tissue. When stiffening was initiated after only 1 day of culture, fibroblasts rapidly responded and displayed increased DNA methylation and chromatin decondensation, similar to fibroblasts on static stiffer hydrogels. Conversely, when fibroblasts experienced later stiffening at day 7, they showed no changes in DNA methylation and chromatin condensation, suggesting the induction of a persistent fibroblast phenotype. These results highlight the time-dependent nuclear changes associated with fibroblast activation in response to dynamic mechanical perturbations and may provide mechanisms to target for controlling fibroblast activation.

bioengineering↗

bioRxiv2021

Photoreactive hydrogel stiffness influences volumetric muscle loss repair

Volumetric muscle loss (VML) injuries are characterized by permanent loss of muscle mass, structure, and function. Hydrogel biomaterials provide an attractive platform for skeletal muscle tissue engineering due to the ability to easily modulate their biophysical and biochemical properties to match a range of tissue characteristics. In this work we successfully developed a mechanically tunable hyaluronic acid (HA) hydrogel system to investigate the influence of hydrogel stiffness on VML repair. HA was functionalized with photoreactive norbornene groups to create hydrogel networks that rapidly crosslink via thiol-ene click chemistry with tailored mechanics. Mechanical properties were controlled by modulating the amount of matrix metalloproteinase (MMP)-degradable peptide crosslinker to produce hydrogels with increasing elastic moduli of 1.1 {+/-} 0.002, 3.0 {+/-} 0.002, and 10.6 {+/-} 0.006 kPa mimicking a relevant range of developing and mature muscle stiffnesses. Functional muscle recovery was assessed following implantation of the HA hydrogels by in situ photopolymerization into rat latissimus dorsi (LD) VML defects at 12 and 24 weeks post-injury. After 12 weeks, muscles treated with medium stiffness (3.0 kPa) hydrogels produced maximum isometric forces most similar to contralateral healthy LD muscles. This trend persisted at 24 weeks post-injury, suggestive of sustained functional recovery. Histological analysis revealed a significantly larger zone of regeneration with more de novo muscle fibers following implantation of medium stiffness hydrogels in VML-injured muscles compared to other experimental groups. Lower (low and medium) stiffness hydrogels also appeared to attenuate the chronic inflammatory response characteristic of VML injuries, displaying similar levels of macrophage infiltration and polarization to healthy muscle. Together these findings illustrate the importance of hydrogel mechanical properties in supporting functional repair of VML injuries.

bioengineering↗