Biology subjects

Bera, A. K.

Publications and source records attributed to Bera, A. K..

At least 37 records · Page 2Linked to original sources

bioRxiv2024

Designed miniproteins potently inhibit and protect against MERS-CoV

Middle-East respiratory syndrome coronavirus (MERS-CoV) is a zoonotic pathogen with 36% case-fatality rate in humans. No vaccines or specific therapeutics are currently approved to use in humans or the camel host reservoir. Here, we computationally designed monomeric and homo-oligomeric miniproteins binding with high affinity to the MERS-CoV spike (S) glycoprotein, the main target of neutralizing antibodies and vaccine development. We show that these miniproteins broadly neutralize a panel of MERS-CoV S variants, spanning the known antigenic diversity of this pathogen, by targeting a conserved site in the receptor-binding domain (RBD). The miniproteins directly compete with binding of the DPP4 receptor to MERS-CoV S, thereby blocking viral attachment to the host entry receptor and subsequent membrane fusion. Intranasal administration of a lead miniprotein provides prophylactic protection against stringent MERS-CoV challenge in mice motivating future clinical development as a next-generation countermeasure against this virus with pandemic potential.

biochemistry↗

bioRxiv2024

Target-conditioned diffusion generates potent TNFR superfamily antagonists and agonists

Despite progress in designing protein binding proteins, the shape matching of designs to targets is lower than in many native protein complexes, and design efforts have failed for TNF receptor (TNFR1) and other protein targets with relatively flat and polar surfaces. We hypothesized that free diffusion from random noise could generate shape-matched binders for challenging targets, and tested this on TNFR1. We obtain designs with low picomolar affinity whose specificity can be completely switched to other family members using partial diffusion. Designs function as antagonists or as superagonists when presented at higher valency for OX40 and 4-1BB. The ability to design high-affinity and specificity antagonists and agonists for pharmacologically important targets in silico presages a new era in which binders are made by computation rather than immunization or random screening approaches.

biochemistry↗

bioRxiv2024

Parametrically guided design of beta barrels and transmembrane nanopores using deep learning

Francis Cricks global parameterization of coiled coil geometry has been widely useful for guiding design of new protein structures and functions. However, design guided by similar global parameterization of beta barrel structures has been less successful, likely due to the deviations from ideal barrel geometry required to maintain inter-strand hydrogen bonding without introducing backbone strain. Instead, beta barrels have been designed using 2D structural blueprints; while this approach has successfully generated new fluorescent proteins, transmembrane nanopores, and other structures, it requires expert knowledge and provides only indirect control over the global shape. Here we show that the simplicity and control over shape and structure provided by parametric representations can be generalized beyond coiled coils by taking advantage of the rich sequence-structure relationships implicit in RoseTTAFold based design methods. Starting from parametrically generated barrel backbones, both RFjoint inpainting and RFdiffusion readily incorporate backbone irregularities necessary for proper folding with minimal deviation from the idealized barrel geometries. We show that for beta barrels across a broad range of beta sheet parameterizations, these methods achieve high in silico and experimental success rates, with atomic accuracy confirmed by an X-ray crystal structure of a novel barrel topology, and de novo designed 12, 14, and 16 stranded transmembrane nanopores with conductances ranging from 200 to 500 pS. By combining the simplicity and control of parametric generation with the high success rates of deep learning based protein design methods, our approach makes the design of proteins where global shape confers function, such as beta barrel nanopores, more precisely specifiable and accessible. SignificanceDe novo beta barrel proteins have previously been designed using "blueprint" based methods which require expert knowledge of the rules of folding and provide only indirect control of the overall barrel shape by specifying structural features such as glycine kinks and beta bulges. The barrel shape can be directly modeled using global parametric methods, but to date such methods have not succeeded in generating folded proteins, likely due to the absence of such structural features. Here, we describe methods that combine the simplicity and control of parametric barrel specification with the high success rates of deep learning based protein design methods to successfully design new beta barrel folds of different and pre-specified sizes, including both soluble designs and transmembrane nanopores.

biochemistry↗

bioRxiv2024

Sequence-specific targeting of intrinsically disordered protein regions

Intrinsically disordered proteins and peptides play key roles in biology, but the lack of defined structures and the high variability in sequence and conformational preferences has made targeting such systems challenging. We describe a general approach for designing proteins that bind intrinsically disordered protein regions in diverse extended conformations with side chains fitting into complementary binding pockets. We used the approach to design binders for 39 highly diverse unstructured targets and obtain designs with pM to 100 nM affinities in 34 cases, testing [~]22 designs per target (including polar targets). The designs function in cells and as detection reagents, and are specific for their intended targets in all-by-all binding experiments. Our approach is a major step towards a general solution to the intrinsically disordered protein and peptide recognition problem.

biochemistry↗

bioRxiv2024

Diffusing protein binders to intrinsically disordered proteins

Proteins which bind intrinsically disordered proteins (IDPs) and intrinsically disordered regions (IDRs) with high affinity and specificity could have considerable utility for therapeutic and diagnostic applications. However, a general methodology for targeting IDPs/IDRs has yet to be developed. Here, we show that starting only from the target sequence of the input, and freely sampling both target and binding protein conformation, RFdiffusion can generate binders to IDPs and IDRs in a wide range of conformations. We use this approach to generate binders to the IDPs Amylin, C-peptide and VP48 in a range of conformations with Kds in the 3 -100nM range. The Amylin binder inhibits amyloid fibril formation and dissociates existing fibers, and enables enrichment of amylin for mass spectrometry-based detection. For the IDRs G3bp1, common gamma chain (IL2RG) and prion, we diffused binders to beta strand conformations of the targets, obtaining 10 to 100 nM affinity. The IL2RG binder colocalizes with the receptor in cells, enabling new approaches to modulating IL2 signaling. Our approach should be widely useful for creating binders to flexible IDPs/IDRs spanning a wide range of intrinsic conformational preferences.

biochemistry↗

bioRxiv2023

The Neuroprotective Effect of Short-chain Fatty Acids Against Hypoxia-reperfusion Injury

Gut microbe-derived short-chain fatty acids (SCFAs) are known to have a profound impact on various brain functions, including cognition, mood, and overall neurological health. However, their role, if any, in protecting against hypoxic injury and ischemic stroke has not been extensively studied. In this study, we investigated the effects of two major SCFAs abundant in the gut, propionate (P) and butyrate (B), on hypoxia-reperfusion injury using a neuronal cell line and a zebrafish model. Neuro 2a (N2a) cells treated with P and B exhibited reduced levels of mitochondrial and cytosolic reactive oxygen species (ROS), diminished loss of mitochondrial membrane potential, suppressed caspase activation, and lower rates of cell death when exposed to CoCl2-induced hypoxia, compared to the control group. Furthermore, adult zebrafish fed with SCFAs-supplemented feeds showed less susceptibility to hypoxic conditions compared to the control group, as indicated by multiple behavioral measures. Histological analysis of TTC-stained brain sections revealed lesser damage in the SCFAs-fed group. We also found that FABP7 (also known as BLBP), a neuroprotective fatty acid binding protein, was upregulated in the brains of the SCFAs-fed group. Additionally, when FABP7 was overexpressed in N2a cells, it protected the cells from hypoxia-reperfusion injury. Overall, our data clearly demonstrates a neuroprotective role of P and B against hypoxic brain injury and suggests the potential of dietary supplementation with SCFAs to mitigate stroke-induced brain damage. HighlightsO_LIShort-chain fatty acid (SCFA) Propionate (P) and Butyrate (B) protect N2a cells from hypoxia-reperfusion. C_LIO_LIZebrafish, when fed an SCFA-supplemented diet, are more resilient to hypoxia-reperfusion. C_LIO_LISCFAs in the diet boost brain expression of FABP7 (fatty acid binding protein). C_LIO_LIFABP7 overexpression in N2a cells provides protection against hypoxia-reperfusion. C_LIO_LISCFAs reduce reactive oxygen species (ROS) levels and increase FABP7, contributing to neuroprotection. C_LI

neuroscience↗

bioRxiv2023

De novo design of diverse small molecule binders and sensors using Shape Complementary Pseudocycles

A general method for designing proteins to bind and sense any small molecule of interest would be widely useful. Due to the small number of atoms to interact with, binding to small molecules with high affinity requires highly shape complementary pockets, and transducing binding events into signals is challenging. Here we describe an integrated deep learning and energy based approach for designing high shape complementarity binders to small molecules that are poised for downstream sensing applications. We employ deep learning generated psuedocycles with repeating structural units surrounding central pockets; depending on the geometry of the structural unit and repeat number, these pockets span wide ranges of sizes and shapes. For a small molecule target of interest, we extensively sample high shape complementarity pseudocycles to generate large numbers of customized potential binding pockets; the ligand binding poses and the interacting interfaces are then optimized for high affinity binding. We computationally design binders to four diverse molecules, including for the first time polar flexible molecules such as methotrexate and thyroxine, which are expressed at high levels and have nanomolar affinities straight out of the computer. Co-crystal structures are nearly identical to the design models. Taking advantage of the modular repeating structure of pseudocycles and central location of the binding pockets, we constructed low noise nanopore sensors and chemically induced dimerization systems by splitting the binders into domains which assemble into the original pseudocycle pocket upon target molecule addition. One Sentence SummaryWe use a pseuodocycle-based shape complementarity optimizing approach to design nanomolar binders to diverse ligands, including the flexible and polar methotrexate and thyroxine, that can be directly converted into ligand-gated nanopores and chemically induced dimerization systems.

biochemistry↗

bioRxiv2023

Sculpting conducting nanopore size and shape through de novo protein design

Transmembrane {beta}-barrels (TMBs) are widely used for single molecule DNA and RNA sequencing and have considerable potential for a broad range of sensing and sequencing applications. Current engineering approaches for nanopore sensors are limited to naturally occurring channels such as CsgG, which have evolved to carry out functions very different from sensing, and hence provide sub-optimal starting points. In contrast, de novo protein design can in principle create an unlimited number of new nanopores with any desired properties. Here we describe a general approach to the design of transmembrane {beta}-barrel pores with different diameter and pore geometry. NMR and crystallographic characterization shows that the designs are stably folded with structures close to the design models. We report the first examples of de novo designed TMBs with 10, 12 and 14 stranded {beta}-barrels. The designs have distinct conductances that correlate with their pore diameter, ranging from 110 pS ([~]0.5 nm pore diameter) to 430 pS ([~]1.1 nm pore diameter), and can be converted into sensitive small-molecule sensors with high signal to noise ratio. The capability to generate on demand {beta}-barrel pores of defined geometry opens up fundamentally new opportunities for custom engineering of sequencing and sensing technologies. One sentence summaryDe novo design enables the generation of stable and quite transmembrane beta-barrel nanopores with tailored sizes, shapes and properties.

synthetic biology↗

bioRxiv2023

Improving protein expression, stability, and function with ProteinMPNN

Natural proteins are highly optimized for function, but are often difficult to produce at a scale suitable for biotechnological applications due to poor expression in heterologous systems, limited solubility, and sensitivity to temperature. Thus, a general method that improves the physical properties of native proteins while maintaining function could have wide utility for protein-based technologies. Here we show that the deep neural network ProteinMPNN together with evolutionary and structural information provides a route to increasing protein expression, stability, and function. For both myoglobin and tobacco etch virus (TEV) protease, we generated designs with improved expression, elevated melting temperatures, and improved function. For TEV protease, we identified multiple designs with improved catalytic activity as compared to the parent sequence and previously reported TEV variants. Our approach should be broadly useful for improving the expression, stability, and function of biotechnologically important proteins.

biochemistry↗

bioRxiv2023

Rapid and automated design of two-component protein nanomaterials using ProteinMPNN

The design of novel protein-protein interfaces using physics-based design methods such as Rosetta requires substantial computational resources and manual refinement by expert structural biologists. A new generation of deep learning methods promises to simplify protein-protein interface design and enable its application to a wide variety of problems by researchers from various scientific disciplines. Here we test the ability of a deep learning method for protein sequence design, ProteinMPNN, to design two-component tetrahedral protein nanomaterials and benchmark its performance against Rosetta. ProteinMPNN had a similar success rate to Rosetta, yielding 13 new experimentally confirmed assemblies, but required orders of magnitude less computation and no manual refinement. The interfaces designed by ProteinMPNN were substantially more polar than those designed by Rosetta, which facilitated in vitro assembly of the designed nanomaterials from independently purified components. Crystal structures of several of the assemblies confirmed the accuracy of the design method at high resolution. Our results showcase the potential of deep learning-based methods to unlock the widespread application of designed protein-protein interfaces and self-assembling protein nanomaterials in biotechnology.

biochemistry↗

bioRxiv2023

De novo design of highly selective miniprotein inhibitors of integrins αvβ6 and αvβ8

The RGD (Arg-Gly-Asp)-binding integrins v{beta}6 and v{beta}8 are clinically validated cancer and fibrosis targets of considerable therapeutic importance. Compounds that can discriminate between the two closely related integrin proteins and other RGD integrins, stabilize specific conformational states, and have sufficient stability enabling tissue restricted administration could have considerable therapeutic utility. Existing small molecules and antibody inhibitors do not have all of these properties, and hence there is a need for new approaches. Here we describe a method for computationally designing hyperstable RGD-containing miniproteins that are highly selective for a single RGD integrin heterodimer and conformational state, and use this strategy to design inhibitors of v{beta}6 and v{beta}8 with high selectivity. The v{beta}6 and v{beta}8 inhibitors have picomolar affinities for their targets, and >1000-fold selectivity over other RGD integrins. CryoEM structures are within 0.6-0.7[A] root-mean-square deviation (RMSD) to the computational design models; the designed v{beta}6 inhibitor and native ligand stabilize the open conformation in contrast to the therapeutic anti-v{beta}6 antibody BG00011 that stabilizes the bent-closed conformation and caused on-target toxicity in patients with lung fibrosis, and the v{beta}8 inhibitor maintains the constitutively fixed extended-closed v{beta}8 conformation. In a mouse model of bleomycin-induced lung fibrosis, the v{beta}6 inhibitor potently reduced fibrotic burden and improved overall lung mechanics when delivered via oropharyngeal administration mimicking inhalation, demonstrating the therapeutic potential of de novo designed integrin binding proteins with high selectivity.

biochemistry↗

bioRxiv2023

Blueprinting expandable nanomaterials with standardized protein building blocks

A wooden house frame consists of many different lumber pieces, but because of the regularity of these building blocks, the structure can be designed using straightforward geometrical principles. The design of multicomponent protein assemblies in comparison has been much more complex, largely due to the irregular shapes of protein structures1. Here we describe extendable linear, curved, and angled protein building blocks, as well as inter-block interactions that conform to specified geometric standards; assemblies designed using these blocks inherit their extendability and regular interaction surfaces, enabling them to be expanded or contracted by varying the number of modules, and reinforced with secondary struts. Using X-ray crystallography and electron microscopy, we validate nanomaterial designs ranging from simple polygonal and circular oligomers that can be concentrically nested, up to large polyhedral nanocages and unbounded straight "train track" assemblies with reconfigurable sizes and geometries that can be readily blueprinted. Because of the complexity of protein structures and sequence-structure relationships, it has not been previously possible to build up large protein assemblies by deliberate placement of protein backbones onto a blank 3D canvas; the simplicity and geometric regularity of our design platform now enables construction of protein nanomaterials according to "back of an envelope" architectural blueprints.

biochemistry↗

bioRxiv2023

Cyclic peptide structure prediction and design using AlphaFold

Deep learning networks offer considerable opportunities for accurate structure prediction and design of biomolecules. While cyclic peptides have gained significant traction as a therapeutic modality, developing deep learning methods for designing such peptides has been slow, mostly due to the small number of available structures for molecules in this size range. Here, we report approaches to modify the AlphaFold network for accurate structure prediction and design of cyclic peptides. Our results show this approach can accurately predict the structures of native cyclic peptides from a single sequence, with 36 out of 49 cases predicted with high confidence (pLDDT > 0.85) matching the native structure with root mean squared deviation (RMSD) less than 1.5 [A]. Further extending our approach, we describe computational methods for designing sequences of peptide backbones generated by other backbone sampling methods and for de novo design of new macrocyclic peptides. We extensively sampled the structural diversity of cyclic peptides between 7-13 amino acids, and identified around 10,000 unique design candidates predicted to fold into the designed structures with high confidence. X-ray crystal structures for seven sequences with diverse sizes and structures designed by our approach match very closely with the design models (root mean squared deviation < 1.0 [A]), highlighting the atomic level accuracy in our approach. The computational methods and scaffolds developed here provide the basis for custom-designing peptides for targeted therapeutic applications.

biochemistry↗

bioRxiv2023

Design of stimulus-responsive two-state hinge proteins

Proteins that switch between two structural states as a function of environmental stimuli are widespread in nature. These proteins structurally transduce biochemical information in a manner analogous to how transistors control information flow in computing devices. Engineering challenges ranging from biological computing devices to molecular motors require such two-state switches, but designing these is an unsolved problem as it requires sculpting an energy landscape with two low-energy but structurally distinct conformations that can be modulated by external inputs. Here we describe a general design approach for creating "hinge" proteins that populate one distinct state in the absence of ligand and a second designed state in the presence of ligand. X-ray crystallography, electron microscopy, and double electron-electron resonance spectroscopy demonstrate that despite the significant structural differences, the two states are designed with atomic level accuracy. The kinetics and thermodynamics of effector binding can be finely tuned by modulating the free energy differences between the two states; when this difference becomes sufficiently small, we obtain bistable proteins that populate both states in the absence of effector, but collapse to a single state upon effector addition. Like the transistor, these switches now enable the design of a wide array of molecular information processing systems.

biophysics↗

bioRxiv2023

Design of amyloidogenic peptide traps

Segments of proteins with {beta}-strand propensity can self associate to form amyloid fibrils associated with many diseases. These regions often adopt alternative structures in their folded states, or are intrinsically disordered in solution, making it difficult to generate binders or inhibitors with existing strategies. Here we describe a general approach to bind such segments in {beta}-strand and {beta}-hairpin conformations using de novo designed scaffolds that contain deep peptide binding clefts flanked by {beta}-strands that form hydrogen bonds to the peptide upon binding. The designs bind their cognate peptides in vitro with nanomolar affinities and in mammalian cells. The crystal structure of a designed protein-peptide complex is close to the design model, and NMR characterization reveals how the peptide binding cleft is protected in the apo state. We use the approach to design binders to segments of the amyloid forming proteins Transthyretin, Tau, Serum amyloid A1 and A{beta}42. The A{beta} binders block assembly of A{beta} fibrils as effectively as the most potent of the clinically tested antibodies to date.

synthetic biology↗

bioRxiv2022

Accurate Computational Design of 3D Protein Crystals

Protein crystallization plays a central role in structural biology1, with broad impact2 in pharmaceutical formulation3, drug delivery4, biosensing5, and biocatalysis6,7. Despite this importance, the process of protein crystallization remains poorly understood and highly empirical8-10, with largely unpredictable crystal contacts, lattice packing arrangements, and space group preferences, and the programming of protein crystallization through precisely engineered sidechain-sidechain interactions across multiple protein-protein interfaces is an outstanding challenge. Here we develop a general computational approach to designing three-dimensional (3D) protein crystals with pre-specified lattice architectures at atomic accuracy that hierarchically constrains the overall degree of freedoms (DOFs) of the system. We use the approach to design three pairs of oligomers that can be individually purified, and upon mixing, spontaneously self-assemble into large 3D crystals (>100 m). Small-angle X-ray scattering and X-ray crystallography show these crystals are nearly identical to the computational design models, with the design target F4132 and I432 space groups and closely corresponding overall architectures and protein-protein interfaces. The crystal unit cell dimensions can be systematically redesigned while retaining space group symmetry and overall architecture, and the crystals are both extremely porous and highly stable, enabling the robust scaffolding of inorganic nanoparticle arrays. Our approach thus enables the computational design of protein crystals with high accuracy, and since both structure and assembly are encoded in the primary sequence, provides a powerful new platform for biological material engineering.

synthetic biology↗

bioRxiv2022

Precisely patterned nanofibers made from extendable protein multiplexes

Molecular systems with coincident cyclic and superhelical symmetry axes have considerable advantages for materials design as they can be readily lengthened or shortened by changing the length of the constituent monomers. Among proteins, alpha helical coiled coils have such symmetric extendable architectures, but are limited by the relatively fixed geometry and flexibility of the helical protomers. Here, we describe a systematic approach to generating modular and rigid repeat protein oligomers with coincident C2 to C8 and superhelical symmetry axes that can be readily extended by repeat propagation. From these building blocks, we demonstrate that a wide range of unbounded fibers can be systematically designed by introducing hydrophilic surface patches that force staggering of the monomers; the geometry of such fibers can be precisely tuned by varying the number of repeat units in the monomer and the placement of the hydrophilic patches.

bioengineering↗

bioRxiv2022

Hallucination of closed repeat proteins containing central pockets

In pseudocyclic proteins such as TIM barrels, {beta} barrels, and some helical transmembrane channels, a single subunit is repeated in a cyclic pattern, giving rise to a central cavity which can serve as a pocket for ligand binding or enzymatic activity. Inspired by these proteins, we devised a deep learning-based approach to broadly exploring the space of closed repeat proteins starting from only a specification of the repeat number and length. Biophysical data for 38 structurally diverse pseudocyclic designs produced in E. coli are consistent with the design models, and two crystal structures we were able to obtain are very close to the designed structures. Docking studies suggest the diversity of folds and central pockets provide effective starting points for designing small molecule binders or enzymes.

molecular biology↗