Biology subjects

Avazmohammadi, R.

Publications and source records attributed to Avazmohammadi, R..

7 recordsLinked to original sources

bioRxiv2025

An image-based biophysical model of the lung to investigate the effect of pulmonary surfactant on lung function

Lung biomechanics aims to understand the structure-function relationship in the lung under normal and pathological conditions. Pulmonary surfactant has a key structural role in lung function with a significant contribution to the mechanical response of the lungs during respiration. Pulmonary surfactant dynamically regulates surface tension at the air-liquid interface to decrease stiffness during respiration and prevent alveolar collapse during lower volumes. Many lung injuries involve alterations to the contribution of surfactants to lung function. We developed a novel biophysical model using a poroelastic formulation that incorporates pulmonary surfactant dynamics and aims to quantify the contribution of the pulmonary surfactant toward lung compliance. The effect of pulmonary surfactant was modeled as a surface energy function, and the surface behavior was converted to bulk behavior by assuming uniform spherical alveoli. The model was used to simulate respiration and investigate the effect of altered surface tension caused by surfactant dysfunction. The model captured the characteristic sigmoidal inspiratory pressure-volume curve and hysteresis observed during clinical measurements. In addition, the model predicted the expected behavior in surfactant dysfunction in lung injuries. We expect this work to serve as an essential step towards de-convoluting and predicting the contributions of the lung parenchyma and pulmonary surfactant to global and regional lung compliance in health and disease.

biophysics↗

bioRxiv2024

Computational modeling of left ventricular flow using PC-CMR-derived four-dimensional wall motion

Intracardiac hemodynamics plays a crucial role in the onset and development of cardiac and valvular diseases. Simulations of blood flow in the left ventricle (LV) have provided valuable insight into assessing LV hemodynamics. While fully coupled fluid-solid modelings of the LV remain challenging due to the complex passive-active behavior of the LV wall myocardium, the integration of imaging-driven quantification of structural motion with computational fluid dynamics (CFD) modeling in the LV holds the promise of feasible and clinically translatable characterization of patient-specific LV hemodynamics. In this study, we propose to integrate two magnetic resonance imaging (MRI) modalities with the moving-boundary CFD method to characterize intracardiac LV hemodynamics. Our method uses the standard cine cardiac magnetic resonance (CMR) images to estimate four-dimensional myocardial motion, eliminating the need for involved myocardial material modeling to capture LV wall behavior. In conjunction with CMR, phase contrast-MRI (PC-MRI) was used to measure temporal blood inflow rates at the mitral orifice, serving as an additional boundary condition. Flow patterns, including velocity streamlines, vortex rings, and kinetic energy, were characterized and compared to the available data. Moreover, relationships between LV wall kinematic markers and flow characteristics were determined without myocardial material modeling and using a non-rigid image registration (NRIR) method. The fidelity of the simulation was quantitatively evaluated by validating the flow rate at the aortic outflow tract against respective PC-MRI measures. The proposed methodology offers a novel and feasible toolset that works with standard PC-CMR protocols to improve the clinical assessment of LV characteristics in prognostic studies and surgical planning.

bioengineering↗

bioRxiv2024

Dissecting contributions of pulmonary arterial remodeling to right ventricular afterload in pulmonary hypertension

Pulmonary hypertension (PH) is defined as an elevation in the right ventricle (RV) afterload, characterized by increased hemodynamic pressure in the main pulmonary artery (PA). Elevations in RV afterload increase RV wall stress, resulting in RV remodeling and potentially RV failure. From a biomechanical standpoint, the primary drivers for RV afterload elevations include increases in pulmonary vascular resistance (PVR) in the distal vasculature and decreases in vessel compliance in the proximal PA. However, the individual contributions of the various vascular remodeling events toward the progression of PA pressure elevations and altered vascular hemodynamics remain elusive. In this study, we used a subject-specific one-dimensional (1D) fluid-structure interaction (FSI) model to investigate the alteration of pulmonary hemodynamics in PH and to quantify the contributions of vascular stiffening and increased resistance towards increased main pulmonary artery (MPA) pressure. We used a combination of subject-specific hemodynamic measurements, ex-vivo mechanical testing of arterial tissue specimens, and ex-vivo X-ray micro-tomography imaging to develop the 1D-FSI model and dissect the contribution of PA remodeling events towards alterations in the MPA pressure waveform. Both the amplitude and pulsatility of the MPA pressure waveform were analyzed. Our results indicated that increased distal resistance has the greatest effect on the increase in maximum MPA pressure, while increased stiffness caused significant elevations in the characteristic impedance. The method presented in this study will serve as an essential step toward understanding the complex interplay between PA remodeling events that leads to the most severe adverse effect on RV dysfunction.

bioengineering↗

bioRxiv2024

In-silico heart model phantom to validate cardiac strain imaging

The quantification of cardiac strains as structural indices of cardiac function has a growing prevalence in clinical diagnosis. However, the highly heterogeneous four-dimensional (4D) cardiac motion challenges accurate "regional" strain quantification and leads to sizable differences in the estimated strains depending on the imaging modality and post-processing algorithm, limiting the translational potential of strains as incremental biomarkers of cardiac dysfunction. There remains a crucial need for a feasible benchmark that successfully replicates complex 4D cardiac kinematics to determine the reliability of strain calculation algorithms. In this study, we propose an in-silico heart phantom derived from finite element (FE) simulations to validate the quantification of 4D regional strains. First, as a proof-of-concept exercise, we created synthetic magnetic resonance (MR) images for a hollow thick-walled cylinder under pure torsion with an exact solution and demonstrated that "ground-truth" values can be recovered for the twist angle, which is also a key kinematic index in the heart. Next, we used mouse-specific FE simulations of cardiac kinematics to synthesize dynamic MR images by sampling various sectional planes of the left ventricle (LV). Strains were calculated using our recently developed non-rigid image registration (NRIR) framework in both problems. Moreover, we studied the effects of image quality on distorting regional strain calculations by conducting in-silico experiments for various LV configurations. Our studies offer a rigorous and feasible tool to standardize regional strain calculations to improve their clinical impact as incremental biomarkers.

bioengineering↗

bioRxiv2024

Complete spatiotemporal quantification of cardiac motion in mice through enhanced acquisition and super-resolution reconstruction

The quantification of cardiac motion using cardiac magnetic resonance imaging (CMR) has shown promise as an early-stage marker for cardiovascular diseases. Despite the growing popularity of CMR-based myocardial strain calculations, measures of complete spatiotemporal strains (i.e., three-dimensional strains over the cardiac cycle) remain elusive. Complete spatiotemporal strain calculations are primarily hampered by poor spatial resolution, with the rapid motion of the cardiac wall also challenging the reproducibility of such strains. We hypothesize that a super-resolution reconstruction (SRR) framework that leverages combined image acquisitions at multiple orientations will enhance the reproducibility of complete spatiotemporal strain estimation. Two sets of CMR acquisitions were obtained for five wild-type mice, combining short-axis scans with radial and orthogonal long-axis scans. Super-resolution reconstruction, integrated with tissue classification, was performed to generate full four-dimensional (4D) images. The resulting enhanced and full 4D images enabled complete quantification of the motion in terms of 4D myocardial strains. Additionally, the effects of SRR in improving accurate strain measurements were evaluated using an in-silico heart phantom. The SRR framework revealed near isotropic spatial resolution, high structural similarity, and minimal loss of contrast, which led to overall improvements in strain accuracy. In essence, a comprehensive methodology was generated to quantify complete and reproducible myocardial deformation, aiding in the much-needed standardization of complete spatiotemporal strain calculations.

bioengineering↗

bioRxiv2024

Multi-Modality Deep Infarct: Non-invasive identification of infarcted myocardium using composite in-silico-human data learning

Myocardial infarction (MI) continues to be a leading cause of death worldwide. The precise quantification of infarcted tissue is crucial to diagnosis, therapeutic management, and post-MI care. Late gadolinium enhancement-cardiac magnetic resonance (LGE-CMR) is regarded as the gold standard for precise infarct tissue localization in MI patients. A fundamental limitation of LGE-CMR is the invasive intravenous introduction of gadolinium-based contrast agents that present potential high-risk toxicity, particularly for individuals with underlying chronic kidney diseases. Herein, we develop a completely non-invasive methodology that identifies the location and extent of an infarct region in the left ventricle via a machine learning (ML) model using only cardiac strains as inputs. In this transformative approach, we demonstrate the remarkable performance of a multi-fidelity ML model that combines rodent-based in-silico-generated training data (low-fidelity) with very limited patient-specific human data (high-fidelity) in predicting LGE ground truth. Our results offer a new paradigm for developing feasible prognostic tools by augmenting synthetic simulation-based data with very small amounts of in-vivo human data. More broadly, the proposed approach can significantly assist with addressing biomedical challenges in healthcare where human data are limited.

biophysics↗

bioRxiv2024

Right ventricular stiffening and anisotropy alterations in pulmonary hypertension: Mechanisms and relations to function

AimsPulmonary hypertension (PH) results in an increase in RV afterload, leading to RV dysfunction and failure. The mechanisms underlying maladaptive RV remodeling are poorly understood. In this study, we investigated the multiscale and mechanistic nature of RV free wall (RVFW) biomechanical remodeling and its correlations with RV function adaptations. Methods and ResultsMild and severe models of PH, consisting of hypoxia (Hx) model in Sprague-Dawley (SD) rats (n=6 each, Control and PH) and Sugen-hypoxia (SuHx) model in Fischer (CDF) rats (n=6 each, Control and PH), were used. Organ-level function and tissue-level stiffness and microstructure were quantified through in-vivo and ex-vivo measures, respectively. Multiscale analysis was used to determine the association between fiber-level remodeling, tissue-level stiffening, and organ-level dysfunction. Animal models with different PH severity provided a wide range of RVFW stiffening and anisotropy alterations in PH. Decreased RV-pulmonary artery (PA) coupling correlated strongly with stiffening but showed a weaker association with the loss of RVFW anisotropy. Machine learning classification identified the range of adaptive and maladaptive RVFW stiffening. Multiscale modeling revealed that increased collagen fiber tautness was a key remodeling mechanism that differentiated severe from mild stiffening. Myofiber orientation analysis indicated a shift away from the predominantly circumferential fibers observed in healthy RVFW specimens, leading to a significant loss of tissue anisotropy. ConclusionMultiscale biomechanical analysis indicated that although hypertrophy and fibrosis occur in both mild and severe PH, certain fiber-level remodeling events, including increased tautness in the newly deposited collagen fibers and significant reorientations of myofibers, contributed to excessive biomechanical maladaptation of the RVFW leading to severe RV-PA uncoupling. Collagen fiber remodeling and the loss of tissue anisotropy can provide an improved understanding of the transition from adaptive to maladaptive remodeling. Translational perspectiveRight ventricular (RV) failure is a leading cause of mortality in patients with pulmonary hypertension (PH). RV diastolic and systolic impairments are evident in PH patients. Stiffening of the RV wall tissue and changes in the wall anisotropy are expected to be major contributors to both impairments. Global assessments of the RV function remain inadequate in identifying patients with maladaptive RV wall remodeling primarily due to their confounded and weak representation of RV fiber and tissue remodeling events. This study provides novel insights into the underlying mechanisms of RV biomechanical remodeling and identifies the adaptive-to-maladaptive transition across the RV biomechanics-function spectrum. Our analysis dissecting the contribution of different RV wall remodeling events to RV dysfunction determines the most adverse fiber-level remodeling to RV dysfunction as new therapeutic targets to curtail RV maladaptation and, in turn, RV failure in PH.

bioengineering↗